Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

In the event of exposure by inhalation :
Get some fresh air. In case of respiratory arrest: give artificial respiration immediately, if necessary give oxygen. Seek
immediate medical attention.
In the event of splashes or contact with eyes :
Rinse with plenty of water or Diphoterine® while holding the eyelids apart (at least 10 minutes). Consult an ophthalmologist.
In the event of splashes or contact with skin :
Wash with plenty of water. Immediately remove contaminated clothing. In case of skin reaction, seek medical attention.
In the event of swallowing :
Do not give the patient anything orally.
Seek medical attention immediately, showing the label.
4.2. Most important symptoms and effects, both acute and delayed
No data available.
4.3. Indication of any immediate medical attention and special treatment needed
treatment according to symptoms. Keep the patient under medical supervision.

Fire-fighting measures

5.1. Extinguishing media
Suitable methods of extinction
In the event of a fire, use :
- powder
- foam
- carbon dioxide (CO2)
Unsuitable methods of extinction
In the event of a fire, do not use :
- sprayed water or water mist
- water jet
5.2. Special hazards arising from the substance or mixture
A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health.
Do not breathe in smoke.
In the event of a fire, the following may be formed :
- carbon monoxide (CO)
- carbon dioxide (CO2)
- Nitrogen oxides (NOx)
5.3. Advice for firefighters
Due to the toxicity of the gas emitted on thermal decomposition of the products, fire-fighting personnel are to be equipped
with autonomous insulating breathing apparatus

Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures
Consult the safety measures listed under headings 7 and 8.
For non first aid worker
Remove all sources of ignition, ensure sufficient ventilation in closed rooms, control vapours, evacuate the risk area.
For first aid worker
First aid workers will be equipped with suitable personal protective equipment (See section 8).
6.2. Environmental precautions
Prevent any material from entering drains or waterways.
6.3. Methods and material for containment and cleaning up
Retrieve the product by mechanical means (sweeping/vacuuming).
Store residues in labelled, leak-proof containers.

Handling and storage

7.1. Precautions for safe handling
Always wash hands after handling.
Remove and wash contaminated clothing before re-using.
Ventilated workshop with ventilation system.
Fire prevention :
Connect containers to ground
Inert the installation if the product is loaded in a solvent.
Capture fumes at the source.
Keep away from all sources of ignition.
Recommended equipment and procedures :
For personal protection, see section 8.
Observe precautions stated on label and also industrial safety regulations.
Also provide breathing apparatus for certain short tasks of an exceptional nature and for emergency interventions.
In all cases, recover emissions at source.
Avoid skin and eye contact with this substance.
Prohibited equipment and procedures :
No smoking, eating or drinking in areas where the substance is used.
7.2. Conditions for safe storage, including any incompatibilities
Store in a dry, ventilated area; away from sources of heat and ignition and on containment.
Keep the container tightly closed in a dry, well-ventilated place.
Always keep in packaging made of an identical material to the original.
Suitable packaging materials :
- Plastic
- Glass

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Shipping information
Proper shipping name and description:
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Shipping information
Proper shipping name and description:
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls
Appropriate engineering controls
A filter or self-contained breathing apparatus or ventilated hood
Personal protection measures, such as personal protective equipment
Pictogram(s) indicating the obligation of wearing personal protective equipment (PPE) :
Use personal protective equipment that is clean and has been properly maintained.
Store personal protective equipment in a clean place, away from the work area.
Never eat, drink or smoke during use. Remove and wash contaminated clothing before re-using. Ensure that there is adequate
ventilation, especially in confined areas.
- Eye / face protection
Avoid contact with eyes.
Before handling powders or dust emission, wear mask goggles in accordance with standard EN166.
Prescription glasses are not considered as protection.
Provide eyewash stations in facilities where the product is handled constantly.
- Hand protection
Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN374.
Gloves must be selected according to the application and duration of use at the workstation.
Protective gloves need to be selected according to their suitability for the workstation in question : other chemical products
that may be handled, necessary physical protections (cutting, pricking, heat protection), level of dexterity required.
Recommended properties :
- Impervious gloves in accordance with standard EN374
- Body protection
Avoid skin contact.
Wear suitable protective clothing.
Suitable type of protective clothing :
Wear protective clothing against solid chemicals and particles suspended in the air (type 5) in accordance with standard
EN13982-1 to prevent skin contact.
Work clothing worn by personnel shall be laundered regularly.
After contact with the product, all parts of the body that have been soiled must be washed.
- Respiratory protection
Avoid breathing dust.
If the ventilation is insufficient, wear appropriate breathing apparatus.
When workers are confronted with concentrations that are above occupational exposure limits, they must wear a suitable,
approved, respiratory protection device.
Independent breathing apparatus for respiratory protection :
Necessary in case of vapour/aerosols. Filter AXP or ABEKP.

Stability and reactivity

Conditions to avoid
Avoid :
- humidity
- heat
- flames and hot surfaces
- shock and friction
10.5. Incompatible materials
Keep away from :
- strong oxidising agents
10.6. Hazardous decomposition products
The thermal decomposition may release/form :
- carbon monoxide (CO)
- carbon dioxide (CO2)
- Nitrogen oxides (NOx)

Disposal considerations

Waste treatment methods
Do not pour into drains or waterways.
Waste :
Waste management is carried out without endangering human health, without harming the environment and, in particular
without risk to water, air, soil, plants or animals.
Recycle or dispose of waste in compliance with current legislation, preferably via a certified collector or company.
Do not contaminate the ground or water with waste, do not dispose of waste into the environment.
Soiled packaging :
Empty container completely. Keep label(s) on container.
Give to a certified disposal contractor.