Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
flammable solids
Type of information:
experimental study
Adequacy of study:
key study
Study period:
18 June 2019
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
EU Method A.10 (Flammability (Solids))
Deviations:
no
GLP compliance:
yes (incl. QA statement)
Specific details on test material used for the study:
No further details specified in the study report
Key result
Test procedure:
burning rate test: preliminary screening test
Burning time:
2 min
Remarks on result:
substance does not ignite and propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period

In the preliminary test the test item melted and could not be ignited. The molten test item did not flame.

Based on the results of the preliminary test, no main test was required.

Interpretation of results:
not classified based on GHS criteria
Conclusions:
The test item could not be ignited. Therefore, the substance is considered to be non-flammable.
Executive summary:

The flammability of the test item, CAS 113601 -85 -7, was determined in accordance to EU method A.10, in compliance with GLP.

The objective of the study was to determine if the test item is flammable. The test item was formed into a powder train. It was ignited by a gas flame and the burning rate was determined.

Two parallel flammability tests were performed. The tests were negative.

The test item (CAS 113601-85-7) is considered to be non-flammable under the conditions of this test.

Description of key information

The test item could not be ignited. Therefore, the substance is considered to be non-flammable.

Key value for chemical safety assessment

Flammability:
not classified

Additional information

Justification for classification or non-classification