Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

General advice: In the case of accident or if you feel unwell, seek medical ad-vice immediately.First aider needs to protect himself.Move out of dangerous area.Take off all contaminated clothing immediately.
If inhaled: If breathed in, move person into fresh air.If breathing is irregular or stopped, administer artificial respiration.
In case of skin contact: Wash off immediately with soap and plenty of water.
In case of eye contact: Immediately flush eye(s) with plenty of water. Protect unharmed eye.
If swallowed: Call a physician immediately.Rinse mouth thoroughly with wate

Fire-fighting measures

Suitable extinguishing media: Dry powder, Carbon dioxide (CO2), Foam, Water spray jet
Unsuitable extinguishing media: High volume water jet
Hazardous combustion products: Carbon dioxide (CO2), Carbon monoxide
Special protective equipment for firefighters: Wear self-contained breathing apparatus and protective suit.
Further information: Standard procedure for chemical fires. In the event of fire and/or explosion do not breathe fumes. Use extinguishing measures that are
appropriate to local circumstances and the surrounding environment. Please observe escape and rescue routes! Fire residues and contaminated fire extinguishing
water must be disposed of in accordance with local regulations.

Accidental release measures

Personal precautions: Wear personal protective equipment. Unprotected persons must be kept away. Avoid contact with skin, eyes and clothing. The danger areas must be delimited and identified using relevant warning and safety signs.
Environmental precautions: Avoid release to the environment. Retain and dispose of contaminated wash water.
Methods for cleaning up: Allow to solidify, use mechanical handling equipment. The hot melt is to be taken up only by trained personnel (fire-brigade). Chemical protection suit and, if necessary, additional heat-protection gloves, should be
worn when handling the product. Clean contaminated floors and objects thoroughly, observing environmental regulations. Dispose of absorbed material in accordance with the regulations. Containers in which spilt substance has been collected
must be adequately labelled.

Handling and storage

Advice on safe handling: Handle in accordance with good industrial hygiene and safety practice. Avoid contact of the substance. Wear personal protective equipment. Handle with care and avoid dust formation.
Advice on protection against fire and explosion: Normal measures for preventive fire protection. Dust can form an explosive mixture with air. Take measures to prevent the build up of electrostatic charge. Keep
away from heat and sources of ignition.
Requirements for storage areas and containers: Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat and sources of ignition.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Product should be worked up in closed equipment. Provide sufficient air exchange and/or exhaust in work rooms. Do not inhale dust. Avoid contact with eyes and skin
Eye protection: Depending on the risk, wear sufficient eye protection (safety glasses with side protection or goggles, and/or if necessary, face shield.)
Hand protection:
Suitable: Butyl rubber gloves. Nitrile rubber
Break through time: > 240 minGlove thickness: 0,4 -0,5 mm

Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work. The selected protective gloves have to comply to the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact). Gloves must be inspected prior to use. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough. Gloves must be rinsed thoroughly after use.
When handling hot material, use heat resistant gloves.
Skin and body protection: Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific workplace, e.g. apron, boots, protective suit (EN 14605, EN ISO 13982-1, EN 13034). When handling hot melts use suitable protective clothing.
Respiratory protection: In the case of vapour formation use a respirator with an approved filter. Respiratory protection complying with DIN EN 14387. Respirator with filter type ABEK is suitable. In case of handling the pure solid product and if dust formation can be expected, use a fine dust face mask according to EN 143. P2 filter.

Stability and reactivity

No decomposition if stored and applied as directed.
Hazardous reactions: Reactions with acids, bases. Reactions with reducing agents.
Conditions to avoid: Protect from heat and direct sunlight.
Materials to avoid: Strong oxidizing agents, strong reducing agents, acids and bases.
Hazardous decomposition products: No decomposition if stored and applied as directed.

Disposal considerations

Waste, which contains the substance must be disposed as hazardeous waste in compliance with the local regulations and with permission of the local authorities. Incineration in a dedicated waste incineration plant is appropriate.
Contaminated packaging, which can´t be cleaned and recycled, must be disposed like the product.

Categories Display