Registration Dossier

Administrative data

First-aid measures

General information:Inhalation: Move the person to the fresh air. If not breathing give artificial respiration. If breathing is difficult give oxygen.Skin contact: Remove contaminated clothing. Rinse with plenty of water or shower.Eye contact: Rinse with plenty of water for at least 15 minutes, especially below the eyelid.Ingestion: If swallowed, wash out mouth with plenty of water.In any case, seek medical advice

Fire-fighting measures

Extinguisher media: Water spray, powder, carbon dioxide or foam extinguishers are appropriate for surrounding fire and materials. Use water spray to cool nearby containers and structures exposed to fire.Under fire conditions the product emits toxic fumes.To extinguish should wear self-contained breathing apparatus and protective clothing to prevent breathing toxic fumes

Accidental release measures

Personal precautions to be taken: Avoid contact with eyes, skin or clothing. Avoid breathing dust or mist. Wash contaminated clothing before reuse.Environmental protection: Avoid leaking into a public drainage and/or sewer.Clearance of spilled product: Sweep up the spilled product and avoid raising dust. Place it in a container for waste disposal. Ventilate the area and wash spill site after material pickup is completed.

Handling and storage

Handling: For handling see section 8.Dust may form explosive mixtures with air. Take measures against electrostatic charges. Avoid ignition sources and warm surfaces. While handling, use appropriate electrically bond or grounding equipment.Storage: Keep the container well-closed.Specific uses: n.a.

Transport information

Land transport (ADR/RID)

UN number:
N/A
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
N/A
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
N/A
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
N/A
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls:Level process when handling quantities higher than 1 kg- Contained measures: Handle the product using contained measures. Localized room air extraction performed. Motor breathing protection or semiautonomous breathing equipment with FFP3 filter.- Personal protection equipment: Semi autonomous breathing equipment is needed. If there are no contained systems available, the room ventilation conditions must be controlled. Use protective clothing (watertight) with motor breathing equipment semi-autonomous with FFP3 filter. - Personal protective equipment:Respiratory protection: Use Motor breathing protection or semiautonomous breathing equipment with FFP3 filter. Hand protection: Wear appropriate gloves, neoprene or nitrile.Eye protection: Avoid contact with eyes.Skin protection: Remove contaminated clothing. Use watertight costume, wash and remove after handling. Avoid contact with skin or clothes. Environmental exposure controls: Check the operating of the containment facilities and the area ventilation. Exposure controls: Laboratory level: when handling quantities lower than 1 Kg.- Containment measures: Handle the product using booths or local exhaust effective systems, and using breathing equipment FFP3 localized room air extraction performed and respiratory protection FFP3 type. - Personal protection equipment: Breathing equipment FFP3 is needed during the preparation and handling of samples.- Personal protective equipment: Respiratory protection: Use protective breathing equipment. With FFP3 filter.Hand protection: Wear appropriate gloves, neoprene or nitrile. Eye protection: Use safety goggles. Skin protection: Use disposable gown and cap during handling of the product. Hygienic measures: Maintain good hygienic measurements. Avoid deliberate contact with the productEnvironmental exposure controls: Check the operating of the exhausters facilities and the area ventilation.

Stability and reactivity

Stability: The product is stable in normal conditions of use. Thermal decomposition products: If heated until decomposition it emits toxic fumes.

Disposal considerations

Dispose of waste in authorized plant, in accordance with the applicable local and national regulations.Study the possibility of reuse.