Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
FIRST AID INHALATION:
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
If the person is unconscious, to place in side position of safety and to call Medical aid
FIRST AID SKIN:
Remove contaminated clothing and shoes.
Wash skin with water using soap if available for at least 15 minutes.
If persistent irritation occurs, obtain medical attention.
FIRST AID EYE:
Rinse immediately with plenty of water for at least 15 minutes and seek medical advice. Consult oculist.
FIRST AID INGESTION:
Potential for aspiration if swallowed. Get medical aid immediately. Do not induce vomiting unless directed to do so
by medical personnel. Never give anything by mouth to an unconscious person.

Most important symptoms and effects, both acute and delayed:
Not considered as dangerous by inhalation and not particularly dangerous by contact with eyes.

Indication of any immediate medical attention and special treatment needed:
Treat symptomatically. If in doubt about what to do, call national poison center control.

Fire-fighting measures

Extinguishing media:
Dry chemical powder, carbon dioxide, waterspray or fog.

Special hazards arising from the substance or mixture:
Hazardous combustion products may include toxic gases and fumes : nitrogen oxides (NOx), Hydrochloric acid, Carbon oxydes (Cox). Dust may be explosive if mixed with air in critical proportions and in the presence of a source of ignition.

Advice for firefighters:
Unsuitable extinguishing media : Water in jet
Protective equipment : Full protective and self-contained breathing apparatus.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Avoid contact with : skin, eyes.
Avoid raising a dust cloud.
Wear gloves, safety spectacles, full protective clothing.
Wear a suitable respirator mask.

Environmental precautions:
Collect spilled material in a suitable drum and remove it as chemical waste.

Methods and material for containment and cleaning up:
Collect the spilled material with a layer of foam to prevent spreading.
Collect spilled material in a suitable drum and remove it as chemical waste
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste
Ensure adequate ventilation.
Do not flush with water or aqueous cleansing agents.

Handling and storage

Precautions for safe handling:
Avoid contact with eyes and prolonged or repeated contact with skin.
Do not breathe dust. Only use in well ventilated areas.
Wash thoroughly after handling.

Conditions for safe storage, including any incompatibilities:
Keep container tightly closed in a well ventilated place.
Ensure adequate ventilation under standard condition of T°C et humidity.
Keep away from incompatible substances.

Transport information

Land transport (ADR/RID)

UN number:
NOT DANGEROUS
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
NOT DANGEROUS
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
NOT DANGEROUS
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
NOT DANGEROUS
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Occupational exposure limit values not established.

Exposure controls:
Only use in well ventilated areas.
Use local exhaust ventilation over processing areas
Wash hands before eating or drinking.
Launder contaminated ou splashed clothing before re-use.
Personal Protective Equipment :
RESPIRATORY PROTECTION: Wear a dust mask respirator (FFP3).
HAND PROTECTION: Gloves resistant to chemicals.
EYES/FACE PROTECTION: Safety spectacles (complete protection to the eyes).
SKIN PROTECTION: Standard issue work clothes. Tight -acid resistant Chemical proof suit and boots

Stability and reactivity

Reactivity: Under storage at normal ambient temperatures the product is stable
Chemical stability: Stable under normal conditions. Reacts with strong oxidising agents.
Possibility of hazardous reactions:Does not decompose when used for intended uses.
Conditions to avoid: Decomposition >250 °C by DSC
Incompatible materials: Strong oxidising agents.
Hazardous decomposition products: Non expected under normal use conditions. Hydrogen chloride, nitrogen oxides (NOx), Carbon oxydes (Cox) may be formed if combustion. Hazardous polymerization does not occur.

Disposal considerations

Incineration.
Dispose to licensed disposal contractor.
All containers should be emptied. Do not reuse empty drums.