Registration Dossier

Administrative data

First-aid measures

General: Get medical attention if symptoms occur.
4.1 Description of first aid measures
Inhalation: Move to fresh air. Get medical attention if symptoms occur.
Eye contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Skin Contact: Wash off promptly and flush contaminated skin with water. Promptly remove clothing if soaked through and flush skin with water. Get medical attention. Wash contaminated clothing before reuse.
Ingestion: If swallowed, do NOT induce vomiting. Give a glass of water. Get medical attention.
4.2 Most important symptoms and effects, both acute and delayed:
Itching Redness
4.3 Indication of any immediate medical attention and special treatment needed
Hazards: This product is not expected to produce adverse effects under normal conditions of use and appropriate personal hygiene.
Treatment: Immediately flush with plenty of water for at least 15 minutes. If easy to do, remove contact lenses. If swallowed, do NOT induce vomiting. Give a glass of water.

Fire-fighting measures

General Fire Hazards: Do not use water jet as an extinguisher, as this will spread the fire. Use water spray to keep fire-exposed containers cool.
5.1 Extinguishing media
Suitable extinguishing media: Alcohol resistant foam. Carbon dioxide Dry chemical.
Unsuitable extinguishing media: Avoid water in straight hose stream; will scatter and spread fire.
5.2 Special hazards arising from the substance or mixture:
Vapors are flammable and heavier than air. Vapors may travel across the ground and reach remote ignition sources causing a flashback fire danger. Ground container and transfer equipment to eliminate static electric sparks.
5.3 Advice for firefighters
Special fire fighting procedures: Take precautionary measures against static discharges. Product may charge electrostatically during pouring or filling. All equipment used when handling the product must be grounded.
Special protective equipment for fire-fighters: Wear self-contained breathing apparatus and protective clothing.

Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures:
Avoid contact with eyes, skin, and clothing. Avoid contact with liquid and vapors. Use personal protective equipment.
6.2 Environmental Precautions: Avoid discharge into drains, water courses or onto the ground.
6.3 Methods and material for containment and cleaning up: Absorb spillage with suitable absorbent material. Shovel up and place in a container for salvage or disposal.
6.4 Reference to other sections: In case of spills, beware of slippery floors and surfaces. See Section 8 of the SDS for Personal Protective Equipment. Collect and dispose of spillage as indicated in section 13 of the SDS.

Handling and storage

7.1 Precautions for safe handling:
Do not breathe vapor/spray. Do not taste or swallow. Avoid contact with eyes, skin, and clothing. Wash hands after handling. Material can accumulate static charges which may cause an electrical spark (ignition source). Use proper bonding and/or grounding procedures.
Storage conditions: Keep away from heat, sparks and open flame. Keep container closed. Store in original container.
7.2 Conditions for safe storage, including any incompatibilities:
Store in tightly closed original container in a dry and cool place.
Storage Stability: Material is stable under normal conditions.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all

Additional transport information

Additional transport information
Not regulated.

Exposure controls / personal protection

Appropriate Engineering Controls: Ensure adequate ventilation, especially in confined areas. Provide eyewash station and safety shower.
Individual protection measures, such as personal protective equipment
General information: Use only in well-ventilated areas. Do not eat, drink or smoke when using the product. Wash hands after handling. Practice good housekeeping.
Eye/face protection: Safety glasses with side-shields conforming to EN166
Skin protection
Hand Protection: Advice: Nitrile rubber.
Other: Wear suitable protective clothing and eye/face protection.

Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Combination filtering device (EN 14387) Respiratory protection mask with Filtertype ABEK
Hygiene measures: Avoid contact with eyes. When using do not smoke. Wash thoroughly after handling.

Environmental exposure controls: No release to wastewater from process as such, wastewater emissions limited to release generated from final equipment cleaning step using water.

Stability and reactivity

10.1 Reactivity: No data available.
10.2 Chemical Stability: Material is stable under normal conditions.
10.3 Possibility of hazardous reactions: Hazardous polymerisation does not occur.
10.4 Conditions to avoid: None known.
10.5 Incompatible Materials: Water Acids and bases Peroxides.
10.6 Hazardous Decomposition Products:Carbon oxides Oxides of silicon. Measurements at temperatures above 150°C in presence of air (oxygen) have shown that small amounts of formaldehyde are formed due to oxidative degradation.

Disposal considerations

13.1 Waste treatment methods
General information: See Section 8 for information on appropriate personal protective equipment. The generation of waste should be avoided or minimized wherever possible. Do not discharge into drains, water courses or onto the ground. Dispose of waste and residues in accordance with local authority requirements.
Disposal methods: Can be incinerated when in compliance with local regulations.