Registration Dossier

Administrative data

First-aid measures

1. Eye contact
- In case of contact with substance, immediately flush eyes with running water at least 20 minutes.
2. Skin contact
- In case of contact with substance, immediately flush skin with running water at least 20 minutes.
- Remove and isolate contaminated clothing and shoes.
- Wash contaminated clothing and shoes before reuse.
- Get immediate medical advice/attention.
3. Inhalation
- Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
- Specific medical treatment is urgent.
- Move victim to fresh air.
- Administer oxygen if breathing is difficult.
4. Ingestion
- Do not let him/her eat anything, if unconscious.
- Get immediate medical advice/attention.
5. Indication of immediate medical attention and notes for physician
- Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves.
6. Most important symptoms and effects, both acute and delayed
-Harmful if swallowed.
-Causes serious eye damage.

Fire-fighting measures

1. Suitable (and unsuitable) extinguishing media
- Suitable extinguishing media: Dry sand, dry chemical, alcohol-resistant foam, water spray, regular foam, CO2
- Unsuitable extinguishing media: High pressure water streams
2. Specific hazards arising from the chemical
- May be ignited by heat, sparks or flames.
- Containers may explode when heated.
- Some of these materials may burn, but none ignite readily.
- Fire will produce irritating and/or toxic gases.
3. Special protective equipment and precautions for fire-fighters
- Dike fire-control water for later disposal; do not scatter the material.
- Move containers from fire area if you can do it without risk.
- Fire involving Tanks; Cool containers with flooding quantities of water until well after fire is out.
- Fire involving Tanks; Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank.
- Fire involving Tanks; Always stay away from tanks engulfed in fire.

Accidental release measures

1. Personal precautions, protective equipment and emergency procedures
- Eliminate all ignition sources.
- Stop leak if you can do it without risk.
- Please note that materials and conditions to avoid.
- Ventilate the area.
- Do not touch or walk through spilled material.
- Prevent dust cloud.
2. Environmental precautions and protective procedures
- Prevent entry into waterways, sewers, basements or confined areas.
3. The methods of purification and removal
- Small Spill; Flush area with flooding quantities of water. And take up with sand or other non-combustible absorbent material and place into containers for later disposal.
- Large Spill; Dike far ahead of liquid spill for later disposal.
- With clean shovel place material into clean, dry container and cover loosely; move containers from spill area.

Handling and storage

1. Precautions for safe handling
- Please note that materials and conditions to avoid.
- Wash thoroughly after handling.
- Please work with reference to engineering controls and personal protective equipment.
- Be careful to high temperature.
2. Conditions for safe storage
- Store in a closed container.
- Store in cool and dry place.

Transport information

Land transport (ADR/RID)

UN number:
n/a
Shippingopen allclose all
Class:
n/a
Classification code:
n/a
Packaging group:
n/a
Labels:
n/a
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
n/a
Shippingopen allclose all
Class:
n/a
Classification code:
n/a
Packaging group:
n/a
Labels:
n/a
Remarksopen allclose all

Marine transport (IMDG)

UN number:
n/a
Proper shipping name and description:
n/a
Chemical name:
n/a
Class:
n/a
Packaging group:
n/a
EmS code:
n/a
Labels:
n/a
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
n/a
Proper shipping name and description:
n/a
Chemical name:
n/a
Class:
n/a
Packaging group:
n/a
Labels:
n/a
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1. Occupational Exposure limits
1) ACGIH regulation : Not available
2) OSHA regulation : Not available
3) NIOSH regulation : Not available
4) EU regulation : Not available
2. Appropriate engineering controls
- Provide local exhaust ventilation system or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value.
3. Personal protective equipment
1) Respiratory protection :
- Wear NIOSH or European Standard EN 149 approved full or half face piece (with goggles) respiratory protective equipment when necessary.
- In case exposed to liquid material, the respiratory protective equipments as follow are recommended. escape full facepiece gas mask (of use for acid gas, in case of acid gas for organic compounds) or escape half facepiece gas mask (of use for acid gas, in case of acid gas for organic compounds) or direct full facepiece gas mask (of use for acid gas, in case of acid gas for organic compounds) half facepiece gas mask (of use for acid gas, in case of acid gas for organic compounds) or powered air-purifying gas mask.
- In lack of oxygen(< 19.5%), wear the supplied-air respirator or self-contained oxygen breathing apparatus.
2) Eye protection :
- Wear facepiece with goggles to protect.
- An eye wash unit and safety shower station should be available nearby work place.
- Wear the protecive glasses or breathable safety goggles to protect from vaporous state organic material causing eye irritation or other disorder.
- An eye wash unit and safety shower station should be available nearby work place.
3) Hand protection :
- Wear chemical resistant gloves.
- Wear appropriate protective gloves by considering physical and chemical properties of chemicals.
4) Body protection :
- Wear appropriate protective chemical resistant clothing.
- Wear appropriate protective clothing by considering physical and chemical properties of chemicals.

Stability and reactivity

1. Chemical stability and Possibility of hazardous reactions
- Fire may produce irritating and/or toxic gases.
- Inhalation of material may be harmful.
2. Conditions to avoid
- Ignition sources (heat, sparks or flames)
3. Incompatible materials
- Combustibles
4. Hazardous decomposition products
- Irritating and/or toxic gases

Disposal considerations

1. Disposal method
- Waste must be disposed of in accordance with federal, state and local environmental control regulations.
2. Disposal precaution
- Consider the required attentions in accordance with waste treatment management regulation.