Registration Dossier

Administrative data

First-aid measures

AID MEASURES
Eye Contact:
Rinse immediately with plenty of water for at least 15 minutes. Obtain medical attention immediately.
Skin Contact:
Remove contaminated clothing and shoes without delay. Wear impermeable gloves. Wash immediately with plenty of water. Pay particular attention to skin crevices, nail folds, etc. Do not reuse contaminated clothing without laundering. Do not reuse contaminated leatherware. Obtain medical attention.
Ingestion:
If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give anything by mouth to an unconscious person.
Inhalation:
Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.

Fire-fighting measures

Suitable Extinguishing Media:
Use water spray or fog, carbon dioxide or dry chemical.
SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE
Keep containers cool by spraying with water if exposed to fire.
ADVICE FOR FIREFIGHTERS
Protective Equipment:
Firefighters, and others exposed, wear self-contained breathing apparatus. Wear full firefighting protective clothing.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Where exposure level is known, wear approved respirator suitable for level of exposure. Where exposure level is not known, wear approved, positive pressure, self-contained respirator. In addition to the protective clothing/equipment in Section 8 (Exposure Controls/Personal Protection), wear impermeable boots.

Environmental Precautions:
Use appropriate containment to avoid environmental contamination.

Methods and material for containment and cleaning up:
Cover spills with some inert absorbent material; sweep up and place in a waste disposal container. Flush spill area with water.

References to other sections:
See Sections 8 and 13 for additional information

Handling and storage

Precautionary Measures: Do not get in eyes, on skin or on clothing. Wash thoroughly after handling.
Special Handling Statements: None
Conditions for safe storage, including any incompatibilities:
Store in accordance with local, state, and federal regulations.
Storage Temperature: Room temperature
Reason: Quality.
Storage Class (TRGS 510): 8 A

Transport information

Land transport (ADR/RID)

UN number:
UN Number: UN1760
Shippingopen allclose all
Class:
8
Packaging group:
II
Labels:
Transport Label Required: Corrosive
Pollutant
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

UN number:
UN1760
Proper shipping name and description:
Corrosive liquid, n.o.s.
Class:
8
Packaging group:
II
Labels:
Transport Label Required: Corrosive
Marine Pollutant
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering Measures:
Utilize a closed system process where feasible.
Where this material is not used in a closed system, good enclosure and local exhaust ventilation should be provided to control exposure when spraying or curing at elevated temperatures

Respiratory Protection:
Where exposures are below the established exposure limit, no respiratory protection is required.
Where exposures exceed the established exposure limit, use respiratory protection recommended for the material and level of exposure.
A full facepiece respirator also provides eye and face protection.

Eye protection:
Prevent eye and skin contact.
Provide eye wash fountain and safety shower in close proximity to points of potential exposure.
Wear eye/face protection such as chemical splash proof goggles or face shield.

Skin Protection:
Prevent contamination of skin or clothing when removing protective equipment.
Barrier creams may be used in conjunction with the gloves to provide additional skin protection.
Wear impermeable gloves and suitable protective clothing.

Hand protection:
Nitrile or fluorinated rubber gloves. Consider the porosity and elasticity data of the glove manufacturer and the specific conditons in the work place.
The chemical resistance depends on the type of product and amount of product on the glove. Therefore gloves need to be changed when in contact with chemicals.
Due to many conditions (e.g. temperature, abrasion) the practical usage of a chemical protective glove in practice may be much shorter than the permeation time determined through testing.

Additional Advice:
Food, beverages, and tobacco products should not be carried, stored, or consumed where this material is in use.
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.

Stability and reactivity

Stability: Stable
Conditions To Avoid: None known
POSSIBILITY OF HAZARDOUS REACTIONS
Polymerization: Will not occur
Conditions To Avoid: None known
Incompatible materials: Air, oxidizing agents.
Hazardous Decomposition
Products:
oxides of carbon
oxides of phosphorus

Disposal considerations

The Company encourages the recycle, recovery and reuse of materials, where permitted. If disposal is necessary, The Company recommends that organic materials, especially when classified as hazardous waste, be disposed of by thermal treatment or incineration at approved facilities. All local and national regulations should be followed.