Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 221-728-7 | CAS number: 3214-47-9
The test resulted to be negative, thus the substance can be considered as non flammable.
The test was performed according to internationally accepted testing method A.10.
EU method A.10.
According to the CLP Regulation (EC 1272/2008), 2.7 section, flammable solids, powdered, granular or pasty substances or mixtures shall be classified as readily combustible solids when the time of burning of one or more of the test runs, performed in accordance with the test method described in Part III, sub-section 33.2.1, of the UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, is less than 45 seconds or the rate of burning is more than 2.2 mm/s.
The substance did not propagate burning of a 200 mm length of the strip in less than four minutes, therefore it is expected to be non flammable.
In conclusion, according to the CLP Regulation (EC 1272/2008) Direct Black 062 does not meet the criteria to be classified as flammable.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Close Do not show this message again