Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

General advice: Get medical advice/attention if you feel unwell

Eye contact: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing Immediately call a POISON CENTER or doctor/physician

Skin Contact: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower. Wash contaminated clothing before reuse. Immediately call a POISON CENTER or doctor/physician

Inhalation: IF INHALED: Remove person to fresh air and keep comfortable for breathing

Ingestion: IF SWALLOWED: Rinse mouth. DO NOT induce vomiting

Fire-fighting measures

Extinguishing media

Suitable extinguishing media: Dry chemical, CO2, water spray or alcohol-resistant foam

Not to be used for safety reasons: Strong water jet

Special hazards arising from the substance or mixture: Burning produces heavy smoke. Fire may produce irritating and/or toxic gases. In the event of fire and/or explosion do not breathe fumes.

Advice for firefighters: Wear self-contained breathing apparatus and protective suit. Cool containers with flooding quantities of water until well after fire is out. Do not allow run-off from fire-fighting to enter drains or water courses.

Accidental release measures

Personal precautions:

Avoid breathing vapors or mists

Evacuate personnel to safe areas

Use personal protective equipment as required

Avoid contact with skin, eyes or clothing

Keep people away from and upwind of spill/leak

Remove all sources of ignition

For emergency responders:

Use recommended personal protection

Environmental precautions:

Do not allow into any sewer, on the ground or into any body of water. If the product contaminates lakes, rivers or sewage, inform appropriate authorities in accordance with local regulations

Methods and material for containment and cleaning up:

Methods for containment: Prevent further leakage or spillage if safe to do so

Methods for cleaning up: Dispose of waste product or used containers according to local regulations. Clean with detergents. Avoid solvent cleaners. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Pick up and transfer to properly labeled containers.

Handling and storage

Precautions for safe handling:

Advice on safe handling: Operators should wear anti-static footwear and clothing and floors should be of the conducting type. Use recommended personal protection. Never use pressure to empty container. Comply with the health and safety at work laws. Prevent product from entering drains. Do not breathe dust/fume/gas/mist/vapors/spray. Use only in well-ventilated areas. Keep away from heat, sparks, flame and other sources of ignition (i.e., pilot lights, electric motors and static electricity). Take precautionary measures against static discharges.

General Hygiene Considerations: Avoid contact with skin, eyes or clothing. When using do not eat, drink or smoke. Wash contaminated clothing before reuse.

Conditions for safe storage, including any incompatibilities:

Storage Conditions: Keep/store only in original container. Store in accordance with local regulations. Keep unauthorized personnel away. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Keep tightly closed in a dry and cool place.

Incompatible materials: Bases

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Shipping information
Proper shipping name and description:
Corrosive liquid, acidic,organic, n.o.s EPOXYPHOSPHATE RESIN
Chemical name:
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Shipping information
Proper shipping name and description:
Corrosive liquid, acidic, organic, n.o.s, EPOXYPHOSPHATE RESIN
Chemical name:
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Appropriate engineering controls:

Engineering Controls:

Ensure adequate ventilation, especially in confined areas. Provide local exhaust ventilation. In case of insufficient ventilation, wear suitable respiratory equipment.

Individual protection measures, such as personal protective equipment:

Eye/face protection: Face protection shield. Tight sealing safety goggles

Skin and body protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.

Hand Protection: There is no one glove material or combination of materials that will give unlimited resistance to any individual or combination of chemicals. Ensure that the breakthrough time of the glove material is not exceeded. Refer to glove supplier for information on breakthrough time for specific gloves. The instructions and information provided by the glove manufacturer on use, storage, maintenance and replacement must be followed. Gloves should be replaced regularly and if there is any sign of damage to the glove material. Always ensure that gloves are free from defects and that they are stored and used correctly. The performance or effectiveness of the glove may be reduced by physical / chemical damage and poor maintenance.

Respiratory protectionL In case of inadequate ventilation wear respiratory protection

Thermal Protection: No information available

Environmental exposure controls: Do not allow into any sewer, on the ground or into any body of water

Stability and reactivity

Reactivity: No information available

Chemical stability: Stable under normal conditions

Explosion data:

Sensitivity to Mechanical Impact - No information available.

Sensitivity to Static Discharge - No information available.

Possibility of hazardous reactions:

Hazardous polymerization None under normal processing. Possibility of Hazardous Reactions None under normal processing.

Conditions to avoid: Heat, flames and sparks

Incompatible materials: Bases

Hazardous decomposition products: Carbon monoxide. Carbon dioxide (CO2)

Disposal considerations

Waste treatment methods:

Environmental precautions: Prevent product from entering drains. Keep out of waterways.

Waste from residues/unused products: Disposal should be in accordance with applicable regional, national and local laws and regulations

Contaminated packaging: Do not reuse container