Registration Dossier

Administrative data

First-aid measures

- General advice: Get medical attention immediately if symptoms occur. Show this safety data sheet to the doctor in attendance.
- Following inhalation: IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. If breathing is difficult, give oxygen.
- Following skin contact: Wash off immediately with soap and plenty of water. If a person feels unwell or symptoms of skin irritation appear, consult a physician.
- Following eye contact: If eye irritation persists, consult a specialist. Rinse immediately carefully and thoroughly with eye-bath or water.
- Following ingestion: If swallowed, seek medical advice immediately and show this SDS or label. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.
- Most important symptoms and effects: Difficulty in breathing.

Fire-fighting measures

- Suitable extinguishing media:
Carbon dioxide (CO2)
Dry powder
Dry sand
Alcohol-resistant foam
Use water spray or fog; do not use straight streams

- Unsuitable extinguishing media: none

- Special hazards arising from the substance or mixture: None in particular
- Unusual Fire and Explosion Hazards:
Fine dust dispersed in air, in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard

- Hazardous combustion products
Carbon monoxide
Carbon dioxide (CO2)
Oxides of phosphorus (POx)

- Advice for fire fighter:
Special protective equipment for fire-fighters
Wear self contained breathing apparatus for fire fighting if necessary

Accidental release measures

- Personal precautions: Use personal protective equipment.
- Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not flush into surface water or sanitary sewer system.
- Methods and material for containment and cleaning up: Do not create a powder cloud by using a brush or compressed air. Take precautionary measures against static discharges. Take up mechanically, placing in appropriate containers for disposal. Clean contaminated surface thoroughly. Prevent product from entering drains. Local authorities should be advised if significant spillages cannot be contained.

Handling and storage

- Precautions for safe handling:
Take precautionary measures against static discharges. Remove all sources of ignition.
Avoid contact with skin, eyes and clothing. Avoid breathing mists, dusts, or vapors. Wash
hands thoroughly after handling.
- Conditions for safe storage, including any incompatibilities:
Keep containers tightly closed in a cool, well-ventilated place. Keep product and empty
container away from heat and sources of ignition.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1. Technical protection measures: Use only with adequate ventilation
2. Organisational protection measures: This product, as supplied, does not contain any hazardous materials with occupational exposure limits established by the region specific regulatory bodies
3. Hand protection: Protective gloves, Neoprene gloves, Impervious butyl rubber gloves, Nitrile rubber, The determined penetration times according to EN 374 part III are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of the
penetration time, is recommended.
4. Body protection: Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place
5. Eye protection: Safety Glasses
6. Respiratory protection: Effective dust mask.

Stability and reactivity

1. Reactivity : No dangerous reaction known under conditions of normal use
2. Chemical stability : Stable under recommended storage conditions
3. Possibility of hazardous reactions : None known.
4. Conditions to avoid : Heat, flames and sparks
5. Incompatible materials: Oxidising agent
6. Hazardous decomposition products: None reasonably foreseeable

Disposal considerations

Do not contaminate ponds, waterways or ditches with chemical or used container. Dispose of in accordance with federal, state and local regulations
Empty containers should be taken to local recyclers for disposal