Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

First-aid measures after inhalation: Allow the victim to rest. Allow victim to breathe fresh air. Get medical advice/attention if you feel unwell.

First-aid measures after skin contact: Remove contaminated clothes for decontamination by the bottom (not to contaminate the face). Rinse the skin during at least 15 minutes with water at 15° C at 15 cm. If skin irritation occurs, Get medical advice/attention.

First-aid measures after eye contact: Immediately rinse with clean water for 15-20 minutes, and respect this time. Avoid contaminating the healthy eye during the rinsing. Consult an ophtalmologist if irritation persists.

First-aid measures after ingestion: Allow the victim to rest. Get medical advice/attention if you feel unwell.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media: Carbon dioxide. Dry powder.

Special hazards arising from the substance or mixture
Explosion hazard: Potential dust explosion hazard.
Hazardous decomposition products in case of fire: COx. NOx.

Advice for firefighters
Precautionary measures fire: Do not enter fire area without proper protective equipment: fire clothes, boots and Individual Respiratory Protection.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
-For non-emergency personnel
Emergency procedures: Do not breathe dust.
-For emergency responders
Emergency procedures: Delimit the discharge area. Protective equipment not required.

Methods and material for containment and cleaning up
Collect by wet sweeping (appropriated solvent), avoiding dust production.

Reference to other sections
Indications about protective equipment (see Section 8). Indications about waste treatment (see Section 13).

Handling and storage

Precautions for safe handling: Avoid dust formation.
Hygiene measures: Wash hands after each handling. Remove the contaminated clothes. Do not drink, eat or smoke in the handling room. Inspect the individual protection equipment after each handling. No personal objects at the work station. Avoid taking contaminated clothes home. Change clothes systematically at coffee breaks or meal times.

Storage conditions: Store at ambient temperature. Protect from moisture. Keep container tightly closed.
Incompatible products: Oxidizing agents.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
Pierre Fabre Occupational Exposure Band (OEB): OEB 3 (10 ≤ DNEL < 100 µg/m3)
Worker-DNEL long-term for inhalation route- systemic: 10 ≤ DNEL < 100 µg/m3

Exposure controls
Appropriate engineering controls: Fumes detector. First-aid kit. Security instructions.
Personal protective equipment: Not required for normal conditions of use.
Respiratory protection: Respiratory mask P3 or FFP3 type.

Stability and reactivity

Reactivity: No additional information available

Chemical stability: Stable under recommended storage conditions (Section 7).

Conditions to avoid: Temperature higher than 25° C. Moisture.

Incompatible materials: Oxidizing agents.

Hazardous decomposition products: COx, NOx

Disposal considerations

Waste disposal recommendations: Dispose in a safe manner in accordance with local/national regulations.