Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 412-260-6 | CAS number: 52658-19-2 MONO 442
Auto flammability
Administrative data
Link to relevant study record(s)
- Endpoint:
- auto-flammability
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- From June 26, 2008 to August 19, 2008
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.15 (Auto-Ignition Temperature (Liquids and Gases))
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- other: Deutsches Institut für Normung (DIN), DIN Guide 51794: "Determining the Ignition Temperature of Petroleum Products", May 2003.
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- other: International Electrotechnical Commision (IEC), IEC standard 79-4: "Electrical Apparatus for Explosive Gas Atmospheres, Part 4, Method of Test for Ignition Temperature", 1975.
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Key result
- Auto-ignition temperature:
- 425 °C
- Atm. press.:
- > 1 004 - < 1 020 hPa
- Remarks on result:
- other:
- Conclusions:
- Under the study conditions, the test substance is auto-ignitable with an auto-ignition temperature at 1004.0 - 1020.0 hPa of 425°C.
- Executive summary:
A study was conducted to determine the auto flammability of the test substance according to EU Method A.15 and following protocols: DIN Guide 51794 and IEC standard 79-4. Commercially available auto-ignition temperatures apparatus was used for the determination of the degree of auto-ignitability of the test substance. Under the study conditions, the test substance is auto-ignitable with an auto-ignition temperature at 1004.0 - 1020.0 hPa of 425°C (Baltussen, 2008).
Reference
Main test
Ignition of the test substance within 5 minutes after introduction was observed with each sample volume and with each test a minimum auto-ignition temperature was obtained. The maximum deviation between the three values was 20°C. According to the guidelines, no further testing was required.
The lowest temperature at which ignition of the test substance occurred was 429°C. This temperature was rounded off to the nearest multiple of 5°C giving an auto-ignition temperature of the test substance of 425°C.
Description of key information
The auto flammability was determined according to EU Method A.15 and following protocols: DIN Guide 51794 and IEC standard 79-4 (Baltussen, 2008).
Key value for chemical safety assessment
- Autoflammability / Self-ignition temperature at 101 325 Pa:
- 425 °C
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
