Registration Dossier

Administrative data

First-aid measures

General information
When in doubt or if symptoms are observed, get medical advice.
Take off immediately all contaminated clothing and wash it before reuse .

After inhalation
Provide fresh air. If experiencing respiratory symptoms: Call a doctor.

After contact with skin
After contact with skin, wash immediately with plenty of water. If irritation persists or rush occurs, get medical advice/attention.

After contact with eyes
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately consult an ophthalmologist.

After ingestion
Rinse mouth immediately and drink plenty of water. Never give anything by mouth to an unconscious person or a person with cramps. If feeling unwell immediately call a physician.

Most important symptoms and effects, both acute and delayed
No information available.

Indication of any immediate medical attention and special treatment needed
No information available.

Fire-fighting measures

Suitable extinguishing media
Water spray jet, alcohol resistant foam, Carbon dioxide (CO2), Dry extinguishing powder

Unsuitable extinguishing media
High power water jet

Special hazards arising from the substance or mixture
Emission of irritating and toxic fumes and gases.
Hazardous combustion products: Carbon oxides

Advice for firefighters
In the dangerous zone wear self contained breathing apparatus and suitable chemical resistant protective clothing.

Additional information
Suppress gases/vapours/mists with water spray jet.
Do not allow to enter into surface water or drains.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Provide adequate ventilation. Avoid contact with skin, eyes and clothes. Do not breathe gas/vapour/aerosol. Use personal protection equipment.

Environmental precautions
Do not allow to enter into surface water or drains.

Methods and material for containment and cleaning up
Take up mechanically. Collect in closed and suitable containers for disposal. Clear contaminated areas thoroughly.

Handling and storage

Advice on safe handling
Handle in accordance with good industrial hygiene and safety practice: Do not eat, drink, and smoke. Wash hands before break and after work.
Immediately remove any contaminated clothing, shoes or stockings. Provide sufficient ventilation and/or local exhaust system.

Advice on protection against fire and explosion
Usual measures for fire prevention.

Further information on handling
Keep away from heat.

Requirements for storage rooms and vessels
Keep container tightly closed in a cool, well-ventilated place.

Advice on storage compatibility
Store separated from strong oxidising agents. For storage in a common place refer to the respective regulations.

Transport information

Land transport (ADR/RID)

UN number:
n/a
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
n/a
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
n/a
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
n/a
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
Additional advice on limit values
Dust limits (inhalable and alveolar fraction) must be respected under consideration of national provisions.

Appropriate engineering controls
Provide sufficient ventilation and/or local exhaust system.

Protective and hygiene measures
Handle in accordance with good industrial hygiene and safety practice: Do not eat, drink, and smoke. Wash hands before break and after work.
Remove contaminated, saturated clothing immediately.

Eye/face protection
Wear tightly fitting safety goggles. (DIN EN 166)

Hand protection
Wear suitable gloves. (DIN EN 374)
The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Suitable material: NBR (Nitrile rubber)
Minimal thickness of the glove material for penetration time 8 h: 0,11 mm

Skin protection
Choose suitable personal protection equipment dependent on substance concentration and amount specific for workplace. Chemical resistance should be clarified with the supplier.

Respiratory protection
In the presence of dust nuisance wearing a respiratory protection mask with filter P1 (EN143) is recommended.

Environmental exposure controls
Avoid release to the environment.

Stability and reactivity

Reactivity
May be corrosive to metals.

Chemical stability
The substance is chemically stable under recommended conditions of storage, use and temperature.

Possibility of hazardous reactions
No hazardous reaction when handled and stored according to provisions.
dust explosive

Conditions to avoid
Heat

Incompatible materials
alkali
strong oxidising agents
strong reducing agents

Disposal considerations

Advice on disposal
Chemicals and packages as waste must be disposed of in accordance with Directive 2008/98/EC and the respective national and local regulations. Consult your local or regional authorities.
Do not allow to enter into surface water or drains. Dispose of waste according to applicable legislation.

Contaminated packaging
Do not contaminate ground- or surface waters via drainage, by cleaning of equipment or disposal of wastes
Non-contaminated packages may be recycled. Handle contaminated packages in the same way as the substance itself.