Registration Dossier

Diss Factsheets

Physical & Chemical properties

Flammability

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
flammable solids
Type of information:
experimental study
Adequacy of study:
key study
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
other: GLP compliant guideline study, available as unpublished report. No restrictions, fully adequate for assessment
Justification for type of information:
A discussion and report on the read across strategy is given as an attachment in Section 13.
Reason / purpose for cross-reference:
read-across: supporting information
Qualifier:
according to guideline
Guideline:
EU Method A.10 (Flammability (Solids))
GLP compliance:
yes (incl. QA statement)
Key result
Test procedure:
burning time (test type not further specified)
Remarks:
or specified in description of method (migrated information)
Remarks on result:
other: Did not burn

Pile ignited with a small yellow flame which self extinguished after 4 seconds without propogating combustion.

Interpretation of results:
other: Non flammable
Conclusions:
Resin acids and rosin acids, maleated, sodium salts is not highly flammable.
Executive summary:

This is a GLP-compliant, guideline study and is considered to be suitable for use as the key study for this endpoint.

Description of key information

None of the substances in the category Rosin adducts and rosin adduct salts are considered to be flammable, flammable on contact with water or pyrophoric.

Key value for chemical safety assessment

Flammability:
not classified

Additional information

There is no data available for Resin acids and Rosin acids, maleated, potassium salts. However, based on a category approach data available from Resin acids and Rosin acids, maleated, sodium salts is used for read across.

A GLP-compliant study, study following EU Method A.10 (Flammability (Solids)) was provided for Resin acids and Rosin acids, maleated, sodium salts

(Harlan Laboratories Ltd., 2012b). Flammability on contact with water and Pyrophoricity is waived for Resin acids and Rosin acids, maleated, sodium salts.

Justification for classification or non-classification

There is no data available for Resin acids and Rosin acids, maleated, potassium salts. However, based on a category approach data available from Resin acids and Rosin acids, maleated, sodium salts is used for read across.

The available read across data indicates that Resin acids and Rosin acids, maleated, potassium salt is not classified as flammable.