Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
General advice:
First Aid responders should pay attention to self-protection and use the recommended protective clothing
Move out of dangerous area.
Take off contaminated clothing and shoes immediately.
Keep warm and in a quiet place.

If inhaled:
Provide fresh air.

If not breathing, give artificial respiration.
Keep the victim calm and in a semi-upright position.
If symptoms persist, call a physician.

In case of skin contact:
Wash off immediately with plenty of water for at least 15 minutes.
If symptoms persist, call a physician.

In case of eye contact:
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Call a physician immediately.

If swallowed:
Clean mouth with water and drink afterwards plenty of water.
Do NOT induce vomiting.
Never give anything by mouth to an unconscious person.
Call a physician immediately.

Most important symptoms and effects, both acute and delayed
Symptoms:
No information available.

Indication of any immediate medical attention and special treatment needed
Treatment:
Treat symptomatically.
For specialist advice physicians should contact the Poisons Information Service.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media:
Water spray jet
Dry powder
Carbon dioxide (CO2)
Foam

Unsuitable extinguishing media:
High volume water jet

Special hazards arising from the substance or mixture
Specific hazards during fire-fighting:
Hazardous decomposition products formed under fire condi-tions.
Carbon monoxide
Carbon dioxide (CO2)
Metal oxides

Advice for firefighters
Special protective equipment for firefighters:
Wear full protective clothing and self-contained breathing ap-paratus.

Further information:
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Personal precautions:
Ensure adequate ventilation.
Wear personal protective equipment.
Avoid contact with skin, eyes and clothing.
Do not breathe dust.
Knock down dust with water spray jet.
Keep people away from and upwind of spill/leak.

Environmental precautions
Environmental precautions:
Do not flush into surface water or sanitary sewer system.
Avoid subsoil penetration.

Methods and materials for containment and cleaning up
Methods for cleaning up:
Use mechanical handling equipment.
Avoid dust formation.
Pick up and transfer to properly labelled containers.
Adequate disposal

Handling and storage

Precautions for safe handling
Advice on safe handling:
Provide sufficient air exchange and/or exhaust in work rooms.
Wear personal protective equipment.
Do not breathe dust.
Handle in accordance with good industrial hygiene and safety practice.
In general, emissions are controlled and prevented by imple-menting an appropriate management system, including regu-lar informing and training workers.

Advice on protection against fire and explosion:
Normal measures for preventive fire protection.

Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers:
Keep containers tightly closed in a dry, cool and well-ventilated place.
Protect from moisture.

Advice on common storage:
Do not store near acids.
Incompatible with oxidizing agents.
Light metals

Storage temperature:
< 60 °C

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

Shippingopen allclose all
Remarks
Not regulated as a dangerous good

Marine transport (IMDG)

Remarks
Not regulated as a dangerous good

Air transport ICAO/IATA

Remarks
Not regulated as a dangerous good
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
Contains no substances with occupational exposure limit values.

Exposure controls
Engineering measures
Provide sufficient air exchange and/or exhaust in work rooms.
Personal protective equipment

Respiratory protection:
For short-time or low exposures, use breathing apparatus with a filter.
In case of insufficient ventilation wear suitable respiratory equipment.
Recommended Filter type:
Half mask with a particle filter P2 (EN 143)
For intensive or prolonged exposure, use a self-contained breathing apparatus.

Hand protection:
Glove material: Wear suitable gloves.
Protective gloves complying with EN 374.:
The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other.
The exact break through time can be obtained from the pro-tective glove producer and this has to be observed.
Protective gloves have to be replaced at the first sign of dete-rioration.

Eye protection:
Eye protection (EN 166)
Tightly fitting safety goggles

Skin and body protection:
chemical resistant protective clothing

Hygiene measures:
Take off contaminated clothing and shoes immediately.
Avoid contact with skin, eyes and clothing.
Do not breathe dust.
Keep away from food, drink and animal feedingstuffs.
When using do not eat, drink or smoke.
Wash hands before breaks and at the end of workday.

Protective measures:
Facilities storing or utilizing this material should be equipped with an eyewash facility and safety shower.
Handle in accordance with good industrial hygiene and safety practice.
Environmental exposure controls

General advice:
Do not flush into surface water or sanitary sewer system.
Avoid subsoil penetration.

Stability and reactivity

Reactivity
Possibility of hazardous reactions

Chemical stability
Product is hygroscopic.

Possibility of hazardous reactions
Hazardous reactions:
Reactions with strong acids and oxidising agents.

Conditions to avoid:
Protect from moisture.
Avoid dust formation.
10.5 Incompatible materials

Materials to avoid:
Strong acids and oxidizing agents Light metals

Hazardous decomposition products
Risk of decomposition:
No decomposition if stored and applied as directed.

Thermal decomposition:
> 175 °C
To avoid thermal decomposition, do not overheat.

Disposal considerations

Waste treatment methods
Product:
Dispose of in accordance with local regulations.

Contaminated packaging:
Dispose of in accordance with local regulations.

Waste Code:
Waste codes should be assigned by the user, preferably in discussion with the waste disposal authorities.