Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

General information:
Remove contaminated, saturated clothing immediately. If unconscious place in recovery position and seek medical advice. First aider: Pay attention to self-protection! Remove affected person from the danger area and lay down.
Following inhalation:
Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration. In case of inhaling spray mist, consult a physician.
In case of skin contact:
After contact with skin, wash immediately with plenty of water and soap. In case of skin reactions, consult a physician.
After eye contact:
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
After ingestion:
If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Do NOT induce vomiting. Observe risk of aspiration if vomiting occurs.

Fire-fighting measures

- Suitable extinguishing media: Carbon dioxide (CO2) , Foam , Water mist , Extinguishing powder
- Unsuitable extinguishing media: -
- Special hazards arising from the substance or mixture: In case of fire may be liberated: Nitrogen oxides (NOx) , Carbon dioxide (CO2) , Carbon monoxide.
- Advice for fire fighter: Wear a self-contained breathing apparatus and chemical protective clothing. Collect contaminated fire extinguishing water separately. Do not allow entering drains or surface water.

Accidental release measures

- Personal precautions, Protective equipment and emergency procedures: Remove all sources of ignition. Provide adequate ventilation. Use personal protection equipment.
- Environmental precautions: Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil.
- Methods and material for containment and cleaning up:
For containment: Cover drains. Prevent spread over a wide area (e.g. by containment or oil barriers).
For cleaning up: Absorb with liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents). Take up mechanically, placing in appropriate containers for disposal. Use appropriate respiratory protection. Wear personal protection equipment (refer to section 8 of SDS).

Handling and storage

- Precautions for safe handling:
All work processes must always be designed so that the following is excluded: Inhalation of vapours or spray/mists , Skin contact , Eye contact . Provide adequate ventilation as well as local exhaustion at critical locations. Keep away from sources of ignition. - No smoking. Only wear fitting, comfortable and clean protective clothing. Wash hands and face before breaks and after work and take a shower if necessary. Take precautionary measures against static discharges. When using do not eat, drink, smoke, sniff. Immediately remove any contaminated clothing, shoes or stockings. In the immediate working surroundings there must be : Emergency shower installed . Provide eye shower and label its location conspicuously.

- Conditions for safe storage, including any incompatibilities:
Keep container tightly closed in a cool, well-ventilated place. Take precautionary measures against static discharges. Store in a place accessible by authorized persons only. Only use the material in places where open light, fire and other flammable sources can be kept away.
Storage class (TRGS 510): 10

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1. Technical protection measures
Technical measures and the application of suitable work processes have priority over personal protection equipment. Reduce exposure to fume by keeping operating temperatures as low as possible taking into account occupational exposure limits and safe handling temperatures (see SDS Section 7). Where practicable handle within an enclosed process. Alternatively local exhaust ventilation should be considered.

2. Organisational protection measures

3. Hand protection
Tested protective gloves must be worn . The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.

4. Feet protection

5. Body protection
When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn. Required properties : flame-retardant , antistatic. Draw up and observe skin protection programme.

6. Eye protection

7. Respiratory protection
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. Suitable respiratory protection apparatus : Filtering device (full mask or mouthpiece) with filter: ABEK-P3 , Self-contained respirator (breathing apparatus) (DIN EN 133)

Stability and reactivity

1. Reactivity : No information available.
2. Chemical stability : The substance is chemically stable under recommended conditions of storage, use and temperature.
3. Possibility of hazardous reactions : No information available.
4. Conditions to avoid : No information available.
5. Incompatible materials : No information available.
6. Hazardous decomposition products: No information available.

Disposal considerations

Waste treatment methods: Dispose of this material and its container to hazardous or special waste collection point. Do not dispose of with domestic waste. Do not discharge into drains or rivers.