Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 945-047-6 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
· General information:
Immediately remove any clothing soiled by the product.
Remove breathing equipment only after contaminated clothing have been completely removed.
In case of irregular breathing or respiratory arrest provide artificial respiration.
· After inhalation:
Supply fresh air or oxygen; call for doctor.
In case of unconsciousness place patient stably in side position for transportation.
Seek medical treatment.
· After skin contact: Immediately wash with water and soap and rinse thoroughly
After eye contact:
Rinse opened eye for several minutes under running water. Then consult a doctor.
Call a doctor immediately.
· After swallowing:
Call for a doctor immediately.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Fire-fighting measures
Extinguishing media
· Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Use fire extinguishing methods suitable to surrounding conditions.
Special hazards arising from the substance or mixture
No further relevant information available.
Advice for firefighters
· Protective equipment:
Mouth respiratory protective device. Do not inhale explosion gases or combustion gases.
· Additional information: Cool endangered receptacles with water spray
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Environmental precautions:
Dilute with plenty of water.
Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Use neutralising agent.
Dispose contaminated material as waste
Ensure adequate ventilation.
Handling and storage
Precautions for safe handling
Keep receptacles tightly sealed.
Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care
Information about fire - and explosion protection: Keep respiratory protective device available.
Conditions for safe storage, including any incompatibilities
Storage:
· Requirements to be met by storerooms and receptacles: No special requirements.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions: Keep container tightly sealed.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- 2079
Shipping information
- Proper shipping name and description:
- DIETHYLENETRIAMINE, solution
- Chemical name:
- DIETHYLENETRIAMINE
- Language:
- English
- Labels:
- 8
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- 2079
Shipping information
- Proper shipping name and description:
- DIETHYLENETRIAMINE, solution
- Chemical name:
- DIETHYLENETRIAMINE
- Language:
- English
- Labels:
- 8
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- 2079
Shipping information
- Proper shipping name and description:
- DIETHYLENETRIAMINE, solution
- Chemical name:
- DIETHYLENETRIAMINE
- Labels:
- 8
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- 2079
Shipping information
- Proper shipping name and description:
- DIETHYLENETRIAMINE, solution
- Chemical name:
- DIETHYLENETRIAMINE
- Labels:
- 8
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Exposure controls
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing. Wash hands before breaks and at the end of work. Store protective clothing separately.
Avoid contact with the eyes and skin.
Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
The choice of the device of respiratory protection must be based on the planned or known exposure levels, the dangers of the product and the limits of use without danger of the device of respiratory protection held.
Protection of hands:
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Wear solvent and alkali-resistant protective gloves according to EN 374.
In full contact
Glove material: butyl rubber
Thickness (mm): 0.7
Permeation time (min.): > 480
In splash contact
Glove material: nitrile rubber / PVC
Thickness (mm): 0.4
Permeation time (min.): > 240
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Wear gloves for the protection against mechanical hazards according to EN 388.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
For the permanent contact in work areas without heightened risk of injury (e.g. Laboratory) gloves made of the following material are suitable:
Nitrile rubber, NBR
For the permanent contact gloves made of the following materials are suitable:
Nitrile rubber, NBR, PVC gloves
Eye protection:
Tightly sealed goggles
Body protection: Protective work clothing
Stability and reactivity
Reactivity: No further relevant information available.
Chemical stability: Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions: No dangerous reactions known.
Conditions to avoid: No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known
Disposal considerations
Waste treatment methods
· Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage
system.
· Uncleaned packaging:
· Recommendation: Disposal must be made according to official regulations.
· Recommended cleansing agents: Water, if necessary together with cleansing agents
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
