Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
General advice:
Move out of dangerous area. Consult a physician. Show this safety data sheet to the doctor in attendance. Do not leave the victim unattended.

If inhaled:
Consult a physician after significant exposure. If unconscious, place in recovery position and seek medical advice.

In case of skin contact:
If skin irritation persists, call a physician. If on skin, rinse well with water. If on clothes, remove clothes.

In case of eye contact:
Small amounts splashed into eyes can cause irreversible tissue damage and blindness. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.

If swallowed:
Keep respiratory tract clear. Do NOT induce vomiting. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital.

Most important symptoms and effects, both acute and delayed
None known.

Indication of any immediate medical attention and special treatment needed
Treatment:
No special measures required.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media:
In case of fire, use water/water spray/water jet/carbon dioxide/sand/foam/alcohol resistant foam/chemical powder for extinction.

Special hazards arising from the substance or mixture
Specific hazards during firefighting:
Do not allow run-off from firefighting to enter drains or water courses.

Hazardous combustion products:
Carbon dioxide (CO2), Carbon monoxide, Metal oxides

Advice for firefighters
Special protective equipment for firefighters:
Wear self-contained breathing apparatus for firefighting if necessary.

Further information:
Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Personal precautions:
Use personal protective equipment. Avoid dust formation. Avoid breathing dust.

Environmental precautions
Environmental precautions:
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.

Methods and materials for containment and cleaning up
Methods for cleaning up:
Keep in suitable, closed containers for disposal.

Handling and storage

Precautions for safe handling
Advice on safe handling:
Avoid formation of respirable particles. Do not breathe vapours/dust. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. Smoking, eating and drinking should be prohibited in the application area. Provide sufficient air exchange and/or exhaust in work rooms. Dispose of rinse water in accordance with local and national regulations. Persons susceptible to skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used.

Advice on protection against fire and explosion:
Avoid dust formation. Provide appropriate exhaust ventilation at places where dust is formed.

Hygiene measures:
When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.

Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers:
Take action to prevent static discharges. Vent waste air only via suitable separators or scrubbers. Ensure effective ventilation. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Observe label precautions. Electrical installations / working materials must comply with the technological safety standards.

Recommended storage temperature:
5 - 40 °C

Further information on storage stability:
No decomposition if stored and applied as directed.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters:
Contains no substances with occupational exposure limit values.

Exposure controls
Personal protective equipment
Eye protection:
Tightly fitting safety goggles. Eye wash bottle with pure water. Wear face-shield and protective suit for abnormal processing problems.

Hand protection
Material: Butyl rubber - IIR, Wearing time: < 60 min
Material: Nitrile rubber - NBR, Wearing time: < 60 min
Material: Polyvinyl chloride – PVC, Wearing time: < 60 min
Material: Polychloroprene – CR, Wearing time: < 60 min
Remarks:
The suitability for a specific workplace should be discussed with the producers of the protective gloves. After contamination with product change the gloves immediately and dispose of them according to relevant national and local regulations.

Skin and body protection:
Wear suitable protective clothing. Dust impervious protective suit. Choose body protection according to the amount and concentration of the dangerous substance at the work place.

Respiratory protection:
In the case of dust or aerosol formation use respirator with an approved filter. Dust safety masks are recommended when the dust concentration is more than 10 mg/m3.
Recommended filter type: Combined particulates, inorganic and acidic gas/vapour, ammonia/amines and organic vapour type (ABEK-P)

Stability and reactivity

Reactivity:
No decomposition if stored and applied as directed.

Chemical stability:
No decomposition if stored and applied as directed.

Possibility of hazardous reactions:
Hazardous reactions:
No decomposition if stored and applied as directed.

Conditions to avoid
Conditions to avoid:
No data available

Incompatible materials
Materials to avoid:
No specific data.

Hazardous decomposition products:
No decomposition if stored and applied as directed.

Disposal considerations

Waste treatment methods
Product:
The product should not be allowed to enter drains, water courses or the soil. Do not contaminate ponds, waterways or ditches with chemical or used container. Send to a licensed waste management company.

Contaminated packaging:
Empty remaining contents. Dispose of as unused product. Do not re-use empty containers.