Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General advice: Remove contaminated clothing immediately and store/dispose of safely

Inhalation: Remove the casualty into fresh air and keep him calm. In the event of symptoms take medical treatment.

Skin contact: In case of contact with skin wash off immediately with plenty of water. Consult a doctor if skin irritation persists.

Eye contact: In case of contact with eyes rinse thoroughly with plenty of water. If symptoms persist, seek medical advice.

Ingestion: Thoroughly clean the mouth with water. Call for medical advice immediately; show this safety data sheet.

Symptoms: The following symptoms may occur:

- gastrointestinal complaints

Depending on the dose inhalation and/or ingestion may cause: headache, inebriation, unconsciousness.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media: foam, carbon dioxide, dry powder, water spray.

Unsuitable extinguishing media: Full water jet

Special hazards arising from the substance or mixture

In the event of fire the following can be released:

- Nitrogen oxides (NOx)

- carbon dioxide, carbon monoxide

Advice for firefighters

Do not inhale explosion and/or combustion gases.

Use self-contained breathing apparatus and wear protective suit.

Fire residues and contaminated firefighting water must be disposed of in accordance with the local regulations.

Cool endangered containers with water spray jet.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:

High risk of slipping due to leakage/spillage of product.

Use personal protective equipment.

Keep away sources of ignition.

Environmental precautions:

Do not allow to enter drains or waterways.

Do not discharge into the subsoil/soil.

Methods and material for containment and cleaning up:

Take up with absorbent material (eg sand, kieselguhr, universal binder).

Dispose of absorbed material in accordance with the regulations.

Handling and storage

Precautions for safe handling

Advice on safe handling: when working with the product vapors/aerosols may be evolved; therefore a local exhaust and ventilation are recommended.

Hygiene measures: Remove soiled or soaked clothing immediately. Keep away from foodstuffs and beverages. Wash hands before breaks and after work.

Do not eat, drink or smoke when working.

General protective measures:       Do not inhale gases/vapours/aerosols. Avoid contact with eyes and skin.

Conditions for safe storage, including any incompatibilities

Prevention of fire and explosion: Keep away from sources of ignition - no smoking. Take precautionary measures against electrostatic loading. Cool endangered containers by water spray. Vapours can form an explosive mixture with air.

Storage: Keep container tightly closed in a cool, well-ventilated place. Protect from heat and direct sunlight

Specific end use(s): No further recommendations.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Eye protection: tightly fitting safety glasses.

Hand protection: Examples of suitable gloves are those made by the company Kächele-Cama Latex GmbH, Am Kreuzacker 9, D-36124 Eichenzell, e-mail vertrieb@kcl.de, with subsequent specification (test according to EN374); specific workplace conditions must be separately taken into account.

These recommendations apply only to the product mentioned in the material data safety sheet that we supply and the purpose that we indicate.

Glove material: gloves made of nitril (NBR)

Break through time: 480 min

Glove thickness: 0,11 mm

Glove material: gloves made of natural latex

Break through time: 480 min

Glove thickness: 0,5 mm

Glove material: gloves made of chloroprene (CR, e.g. Neoprene)

Break through time: 480 min

Glove thickness: 0,65 mm

Glove material: gloves made of butyl (IIR)

Break through time: 480 min

Glove thickness: 0,7 mm

Body Protection:light protective clothing

a protective ointment is recommended.

Respiratory protection: in case of formation of vapours/aerosols: Respiratory protection mask with combination filter A-P2

Stability and reactivity

Chemical stability:

The product is stable under normal conditions.

Possibility of hazardous reactions:

Evolution of explosive gases/vapours.

Incompatible materials: Unknown

Hazardous decomposition products: None with proper storage and handling.

Disposal considerations

Product: In accordance with regulations for special waste, must be taken, after pretreatment, to an authorised special waste incineration plant.

Contaminated packaging: If empty contaminated containers are recycled or disposed of, the receiver must be informed about possible hazards.