Registration Dossier

Administrative data

First-aid measures

General information:
Immediately remove any clothing soiled by the product.
Personal protection for the First Aider.
May cause sensitization by skin contact.

- Following inhalation: Take affected persons into fresh air and keep quiet. If problems persist consult a doctor.
- Following skin contact: Take off contaminated clothing and wash before reuse. Immediately wash with water and soap and rinse thoroughly. Seek medical attention in case of problems or if problems persist.
- Following eye contact: Rinse opened eye for several minutes under running water. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention in case of problems or if problems persist.
- Following ingestion: If you feel unwell, seek medical advice. Rinse out mouth and then drink plenty of water.

Indication of any immediate medical attention and special treatment needed: First Aid, decontamination, treatment of symptoms.

Fire-fighting measures

- Suitable extinguishing media: Use fire extinguishing methods suitable to surrounding conditions.
Water haze
Water spray
Foam
Fire-extinguishing powder
Carbon dioxide (CO2)

- For safety reasons unsuitable extinguishing agents: Water with full jet.

- Special hazards arising from the substance or mixture: No further relevant information available.
- Advice for fire fighter: Protective equipment: Wear self-contained respiratory protective device. Use appropriate protective equipment.

Additional information: Move undamaged containers from immediate hazard area if it can be done safely.

Accidental release measures

- Personal precautions, protective equipment and emergency procedures: Do not eat, drink, smoke or sniff while working. Avoid contact with the skin. Wear protective clothing. Ensure that washing facilities are available at the work place.
- Environmental precautions: Dumping into the environment must be prevented.
- Methods and material for containment and cleaning up: Waste disposal according to official state regulations.

Handling and storage

- Precautions for safe handling: Do not eat, drink, smoke or sneeze at the workplace. Avoid contact with eyes or skin. Wear personal protective equipment. Wash contaminated clothing prior to re-use. If technical suction or ventilation measures are not possible or insufficient, respiratory protection must be worn. Ensure adequate ventilation.

Information about fire - and explosion protection: Usual measures for fire prevention.

- Conditions for safe storage, including any incompatibilities:
Storage:
Requirements to be met by storerooms and receptacles: Store only in the original container. Keep container tightly closed in a well-ventilated place.
Information about storage in one common storage facility: Keep away from food, drink and animal feeding stuffs.
Further information about storage conditions: Ensure that local, federal and national legislation on storage conditions are observed.
Storage class: 13 Incombustible solids

Transport information

Land transport (ADR/RID)

UN number:
Not dangerous goods
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not dangerous goods
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not dangerous goods
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not dangerous goods
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Additional information about design of technical facilities: Technical measures and the application of adequate working methods take priority over the use of personal protection equipment.

General protective and hygienic measures:
Avoid contact with the eyes and skin.
Take off contaminated clothing and wash before reuse.
Ensure that washing facilities are available at the work place.
Be sure to clean skin thoroughly after work and before breaks.
Do not eat, drink, smoke or sniff while working.

Respiratory protection: If technical suction or ventilation measures are not possible or are insufficient, protective breathing apparatus must be worn.
The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise
when handling the product. If the concentration is exceeded, a self-contained breathing apparatus must be used!

Skin protection: Tested protective gloves are to be worn. When handling chemical substances, chemical protective gloves must be worn with CE label including a four digit code. Type of chemical protective gloves to choose depends on the concentration and quantity of dangerous substances as well as on work place specifications. In the cases of special applications, it is recommended to check the chemical resistance with the manufacturer of the gloves.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.

Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.

Recommendation:
Nitrile rubber, NBR
Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.

Eye protection: Safety glasses with side shields

Body Protection: Protective work clothing

Limitation and supervision of exposure into the environment: Dumping into the environment must be prevented.

Stability and reactivity

1. Reactivity: The product is stable under standard conditions (temperature, pressure) of storage and handling.
2. Chemical stability: The product is stable under standard conditions (temperature, pressure) of storage and handling.
3. Possibility of hazardous reactions: No dangerous reactions known.
4. Conditions to avoid: No further relevant information available.
5. Incompatible materials: No further relevant information available.
6. Hazardous decomposition products: Other decomposition products - No data available

Disposal considerations

Waste treatment methods:

Recommendation:
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Waste disposal according to official state regulations.
Dumping into the environment must be prevented.

Uncleaned packaging:
Recommendation:
Empty contaminated packagings thoroughly. They may be recycled after thorough and proper cleaning.