Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
Flammability
Administrative data
Link to relevant study record(s)
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- From July 18, 2017 to September 14, 2017
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- Version / remarks:
- EU Regulation (EC) 440/2008, Annex Part A test A10.
- Deviations:
- not specified
- GLP compliance:
- yes
- Key result
- Test procedure:
- burning rate test: preliminary screening test
- Moisture (wt %):
- 0.59
- Remarks on result:
- other: The test substance melted, no smouldering, propagation or isolated flame observed. From the preliminary screening test results, the test substance was seen not to ignite and therefore no further testing was required.
- Interpretation of results:
- other: Not classified based on CLP criteria
- Conclusions:
- Under the study conditions, the test substance was considered to be not highly flammable.
- Executive summary:
A study was conducted to determine the flammability of the test substance according to EU A.10 Method, in compliance with GLP. In a preliminary test, the test sample melted, but no propagation or smouldering was observed. From the results of the preliminary screening test, the test substance was found not to ignite and therefore the study author concluded that no further testing was required. Under the study conditions, the test substance was considered to be not highly flammable (Chilworth, 2017).
Reference
Result
In a preliminary test, the test sample melted, but no propagation or smouldering was observed. From the results of the preliminary screening test, the test substance was found not to ignite and therefore the study author concluded that no further testing was required.
Description of key information
The flammability of the test substance was determined according to EU Method A.10 (Chilworth, 2017).
Key value for chemical safety assessment
- Flammability:
- not classified
Additional information
Justification for classification or non-classification
In a preliminary test, the test sample melted, but no propagation or smouldering was observed. From the results of the preliminary screening test, the test substance was found not to ignite and therefore the study author concluded that no further testing was required. Based on the study result, the test substance was considered not to warrant classification for flammability according to the EU CLP criteria (Regulation 1272/2008/EC).
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
