Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Inhalation: Remove to fresh air.

Skin contact: Remove contaminated clothing as soon as possible. Wash exposed skin thoroughly with soap and water. If irritation persists, consult a physician. Launder contaminated clothing before re-use.

Eye contact: Immediately rinse with water for at least 15 minutes. If eye irritation persists, seek medical attention.

Ingestion: Drink 1 or 2 glasses of water. Never give anything by mouth to an unconscious person. IMMEDIATELY see a physician. Do not induce vomiting

Fire-fighting measures

Suitable extinguishing media: Use the following extinguishing media when fighting fires involving this material: Alcohol-resistant foam Carbon dioxide (CO2) Dry chemical.

Accidental release measures

Environmental precautions: Prevent from entering into soil, ditches, sewers, waterways and/or groundwater
Methods and materials for containment and cleaning up: Keep spectators away. Eliminate all ignition sources including those beyond the immediate spill area. Ventilate the area. Contain spills immediately with inert materials (e.g., sand, earth). Transfer liquids and solid diking material to separate suitable containers for recovery or disposal. Avoid breathing vapor. CAUTION: Keep spills and cleaning runoff out of municipal sewers and open bodies of water.

Handling and storage

Precautions for safe handling: Vapors can be evolved when material is heated during processing operations.
Ground all containers when transferring material. Use non-sparking tools and grounding cables when transferring. Wash after handling and shower at end of work period.

Conditions for safe storage, including any incompatibilities: Avoid temperature extremes during storage; ambient temperature preferred. Store away from excessive heat (e.g. steampipes,radiators), from sources of ignition and from reactive materials. Ground all metal containers during storage and handling. Keep tightly closed in a dry, cool and well-ventilated place. Keep away from direct sunlight.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Eye/face protection: Use safety glasses with side shield.
Skin protection
Hand protection: Chemical-resistant gloves should be worn whenever this material is handled. If prolonged or repeated contact is likely, chemical-resistant gloves are recommended. If contact with forearms is likely, wear gauntlet-style gloves. Nitrile, CEN standards EN 420 and EN 374 provide general requirements and lists of glove types. Gloves should be removed and replaced immediately if there is any indication of degradation or chemical breakthrough. Rinse and remove gloves immediately after use. Wash hands with soap and water.
Other protection: Where splashing is possible, full chemically resistant protective clothing (e.g. acid suit) and boots are required.
Respiratory protection: If engineering controls do not maintain airborne contaminant concentrations at a level which is adequate to protect worker health, an approved respirator may be appropriate. Respirator selection, use, and maintenance must be in accordance with regulatory requirements, if applicable. Types of respirators to be considered for this material include:
Half-face filter respirator Type A filter material, European Committee for Standardization (CEN) standards EN 136, 140 and 405 provide respirator masks and EN 149 and 143 provide filter recommendations.

Stability and reactivity

Reactivity: No data available
Chemical stability: No data available

Disposal considerations

Waste treatment methods
Incinerate liquid and contaminated solids in accordance with local, state, and federal regulations.