Registration Dossier

Administrative data

First-aid measures

4.1 General information:
Remove contaminated clothing.
4.2 Inhalation:
Fresh air.
4.3 Skin contact:
Immediately wash thoroughly with soap and water, subsequently apply hand cream.
4.4 Eye contact:
Immediately flush with flowing water for at least 10 minutes, holding the eyelid open.
If eye irritation persists, seek eye specialist advice.
4.5 Swallowing:
Flush mouth with water. Do not induce vomiting, seek medical advice.
4.6 Self-protection of first-aider:
Avoid contact with the product.
4.7 Advice to physician (symptoms, risks, treatment):
Symptomatic treatment.

Fire-fighting measures

5.1 Extinguishing media:
Water spray jet, foam, CO2, extinguishing powder.
5.2 Extinguishing media that must not be used for safety reasons:
Full water jet
5.3 Special hazards arising from the substance or mixture, its combustion products or generated
gases:
The following substances may be released in case of fire: Carbon monoxide, carbon dioxide, nitrogen
oxide, isocyanate-containing vapours.
5.4 Advice for fire-fighters
Keep available/wear respiratory protective devices.
5.5 Additional information:
none

Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures:
Provide adequate ventilation. Remove uninvolved persons.
Wear personal protection equipment; see Chapter 8.
6.2 Environmental precautions:
Keep away from sewerage systems, waterways and soil.
6.3 Methods and material for containment and cleaning up:
Take up spilled product mechanically. Store in marked, tightly closed containers.
Dispose in compliance with regulations.
6.4 Additional information:
none

Handling and storage

7.1.1 Precautions for safe handling:
Protective measures:
Technical measures:
Observe normal safety precautions associated with the handling of chemicals.
Workplaces where isocyanate aerosols and/or vapours may be generated in higher concentrations
shall be equipped with targeted air extraction in order to prevent exceeding of occupational hygiene
limit values. Ensure that airflow is never directed towards personnel. Inspect the efficiency of
installations at regular intervals.
Avoid eye and skin contact.
Avoid dust formation. Do not inhale dusts.
Specific requirements or handling precautions:
7.1.2 Fire and explosion protection information:
Adopt typical preventive fire protection measures.
7.1.3 Further information:
none
7.2 Storage:
7.2.1 Technical measures and storage conditions:
Store in tightly sealed containers.
7.2.2 Packaging materials:
not specified
7.2.5 Further information relating to storage conditions:
Storage class (VCI): 11 - Flammable solid
7.3 Specified end use: Bonding agent

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

8.1 Control parameters:
No data available
8.1.1 Components with occupational exposure or biological limit values to be monitored:
8.1.1.1 Occupational exposure limit values:
No data available
8.1.1.2 Additional exposure limit values under processing conditions:
No data available
8.1.1.3 DNEL/DMEL and PNEC values:
No data available
8.2 Exposure control and monitoring:
8.2.1 Control and monitoring of occupational exposure:
Product-specific measures to avoid exposure:
Provide adequate ventilation.
Organisational measures to avoid exposure:
Customary safety precautions associated with the handling of chemicals should be observed.
Avoid eye and skin contact.
Remove soiled or soaked clothing immediately.
Do not eat, drink or smoke during work.
Cleanse skin with water and soap before breaks and at end of work.
Technical measures to avoid exposure:
Provide adequate ventilation.
Personal protection equipment:
Respiratory protection:
Respiratory protection usually not required. In case of insufficient ventilation or when dusts are
generated, use self-contained breathing apparatus.
Hand protection:
Glove material: Nitrile rubber (Dermatril)
Material thickness 0.1 mm
Penetration time > 480 min
Eye protection:
Protective goggles
Body protection:
Protective clothing. Remove soiled or soaked clothing immediately.
8.2.2 Control and monitoring of environmental exposure:
Avoid release to the environment.
Technical measures to avoid exposure:
Provide adequate ventilation.
8.2.3 Control and monitoring of user exposure
Measures related to use of the substance (as such or in preparations) by user:
Avoid eye and skin contact. Customary safety precautions associated with the handling of chemicals
should be observed.

Stability and reactivity

Disposal considerations