Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 228-800-7 | CAS number: 6359-50-8
Three DSC measurements with a heating rate of 10 K/min showed an endothermal effect (melting) in the temperature range of 100 – 135 °C. The onset temperature (seeTable1) was derived from the intersection of the tangent line with the highest slope of the endothermal peak with the baseline. After melting the test item decomposed. The results of the DSC measurements are summarized inTable 1.
Table1: Melting point (DSC measurements)
Test item /
Starting temperature /
Final test temperature /
Temperature range (endo-thermal) /
Onset (melting) / °C
Observations after the measurement
Aluminium with a hole
Test item was a black solid: mass loss 91%
Test item was a solidified red melt: mass loss 2 %
Under consideration of the result from the DSC measurement and the visual inspection of the test item after the measurement it was concluded that the test item melted within a temperature range of 119 – 122 °C.
The test item had a melting range of 119 – 122°C.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Close Do not show this message again