Registration Dossier

Administrative data

First-aid measures

If adverse health effects develop seek medical attention.
If inhaled:
not relevant.
On skin contact:
After contact with skin, wash immediately with plenty of water.
On contact with eyes:
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. Seek medical attention if necessary.
On ingestion:
Rinse mouth and then drink 200-300 ml of water.

Fire-fighting measures

Extinguishing media:
Suitable extinguishing media:
water spray, dry powder, foam
Unsuitable extinguishing media for safety reasons:
carbon dioxide
Special hazards arising from the substance or mixture:
harmful vapours
Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.
Advice for fire-fighters:
Special protective equipment:
Wear a self-contained breathing apparatus.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Use personal protective clothing.
Environmental precautions:
Do not discharge into drains/surface waters/groundwater.
Methods and material for containment and cleaning up:
For small amounts: Pick up with suitable appliance and dispose of.
For large amounts: Pick up with suitable appliance and dispose of.
Dispose of absorbed material in accordance with regulations.

Handling and storage

Precautions for safe handling:
Handle in accordance with good industrial hygiene and safety practice.
Protection against fire and explosion:
Take precautionary measures against static discharges. Avoid all sources of ignition: heat, sparks, open flame.
Conditions for safe storage, including any incompatibilities
Odour-sensitive: Segregate from products releasing odours.
Suitable materials for containers: High density polyethylene (HDPE), Low density polyethylene (LDPE), glass, Stainless steel 1.4301 (V2), Stainless steel 1.4401, Polypropylene (PP)
Further information on storage conditions: Keep container tightly closed and dry; store in a cool place.
Storage stability:
Storage temperature: <= 40 °C
Protect from temperatures below: 0 °C
The packed product is not damaged by low temperatures or by frost.
Protect from temperatures above: 40 °C
Properties of the product change irreversibly on exceeding the limit temperature.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment
Respiratory protection:
Respiratory protection not required.
Hand protection:
Suitable are protective gloves with the following specification. The recommendation is valid for laboratory conditions, specific workplace conditions must be taken into consideration separately.
Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374):
nitrile rubber (NBR) - 0.2 mm coating thickness
Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice. No eating, drinking, smoking or tobacco use at the place of work.

Stability and reactivity

No hazardous reactions if stored and handled as prescribed/indicated.
Chemical stability:
The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions:
No hazardous reactions when stored and handled according to instructions.
Incompatible materials:
Substances to avoid:
No substances known that should be avoided.
Hazardous decomposition products:
No hazardous decomposition products if stored and handled as prescribed/indicated.

Disposal considerations

Waste treatment methods
Must be disposed of or incinerated in accordance with local regulations.
Contaminated packaging:
Uncontaminated packaging can be re-used.
Packs that cannot be cleaned should be disposed of in the same manner as the contents.