Registration Dossier

Administrative data

First-aid measures

- General advice: Take affected persons out of danger area and lay down.
In case of irregular breathing or respiratory arrest provide artificial respiration.
- Following inhalation: Supply fresh air.
- Following skin contact: Immediately rinse with water.
- Following eye contact: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Call a doctor immediately.
- Following ingestion: Rinse out mouth and then drink plenty of water.
If symptoms persist consult doctor.
Do NOT induce vomiting
- Most important symptoms and effects: No further relevant information available.

Fire-fighting measures

- Suitable extinguishing media: CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Use fire extinguishing methods suitable to surrounding conditions.
- Unsuitable extinguishing media: Water with full jet
- Special hazards arising from the substance or mixture: Formation of toxic gases is possible during heating or in case of fire.
In case of fire, the following can be released:
Carbon monoxide
Carbon dioxide
Nitrogen oxides (NOx)
Sulphur oxides (SOx)
- Advice for fire fighter:
Protective equipment: Wear self-contained respiratory protective device.
Additional information: Cool endangered receptacles with water spray.
Collect contaminated fire fighting water separately. It must not enter the sewage system

Accidental release measures

- Personal precautions, Protective equipment and emergency procedures:
Ensure adequate ventilation.
Wear protective equipment. Keep unprotected persons away.
Avoid formation of dust.
Keep away from ignition sources.
- Environmental precautions:
Do not allow to enter sewers/ surface or ground water.
- Methods and material for containment and cleaning up:
Use neutralising agent.
Pick up mechanically.
Dispose of the material collected according to regulations.

Handling and storage

- Precautions for safe handling:
Prevent formation of dust.
Any unavoidable deposit of dust must be regularly removed.
Ensure good ventilation/exhaustion at the workplace.
· Information about fire and explosion protection:
Dust can combine with air to form an explosive mixture.
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
- Conditions for safe storage, including any incompatibilities:
· Requirements to be met by storerooms and receptacles: Store only in the original receptacle.
· Information about storage in one common storage facility: Store away from oxidising agents.
· Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed receptacles.

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 18(4) for transported isolated intermediate. Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management system is available at each site. Written confirmation of application of Strictly Controlled Conditions has been received from every Downstream user of the intermediate.

Transport information

Land transport (ADR/RID)

UN number:
3077
Shippingopen allclose all
Class:
9
Classification code:
9
Packaging group:
III
Labels:
9
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
3077
Shippingopen allclose all
Class:
9
Classification code:
9
Packaging group:
III
Labels:
9
Remarksopen allclose all

Marine transport (IMDG)

UN number:
3077
Proper shipping name and description:
3077 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (1,3,4-thiadiazole-2,5-dithiol)
Class:
9
Packaging group:
III
EmS code:
F-A,S-F
Labels:
9
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
3077
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (1,3,4-thiadiazole-2,5-dithiol)
Class:
9
Packaging group:
III
Labels:
9
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1. Technical protection measures: Control parameters
Ingredients with limit values that require monitoring at the workplace: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.
2. Organisational protection measures: General protective and hygienic measures:
Do not eat, drink, smoke or sniff while working.
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Store protective clothing separately.
Avoid contact with the eyes and skin.
The usual precautionary measures are to be adhered to when handling chemicals
3. Hand protection: Protective gloves
Only use chemical-protective gloves with CE-labelling of category III.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
· Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
· Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
4. Feet protection: no information
5. Body protection: Protective work clothing
6. Eye protection: Safety glasses
7. Respiratory protection: Not necessary if room is well-ventilated.

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 18(4) for transported isolated intermediate. Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management system is available at each site. Written confirmation of application of Strictly Controlled Conditions has been received from every Downstream user of the intermediate.

Stability and reactivity

1. Reactivity : No further relevant information available.
2. Chemical stability : No decomposition if used and stored according to specifications.
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
3. Possibility of hazardous reactions : No dangerous reactions known.
4. Conditions to avoid : Keep away from heat and direct sunlight.
5. Incompatible materials : No further relevant information available.
6. Hazardous decomposition products: No dangerous decomposition products known

Disposal considerations

Waste treatment methods
· Recommendation: Must be specially treated adhering to official regulations.
Uncleaned packaging
· Recommendation: Disposal must be made according to official regulations.