Registration Dossier

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
flammable solids
Type of information:
experimental study
Adequacy of study:
key study
Study period:
05 February 2018
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to
Guideline:
EU Method A.10 (Flammability (Solids))
Version / remarks:
Commission Regulation (EC) No 440/2008 of 30 May 2008 laying down test methods pursuant to Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), Method A.10, Official Journal of the European Union L 142 of 31 May 2008
Deviations:
no
GLP compliance:
yes (incl. certificate)
Specific details on test material used for the study:
No further details specified in the study report.
Key result
Test procedure:
burning rate test: preliminary screening test
Remarks on result:
substance does not ignite and propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period

In the preliminary test the test item could not be ignited. Based on the results of the preliminary test, no main test was performed.

Interpretation of results:
not classified based on GHS criteria
Conclusions:
The test item could not be ignited. Therefore, the substance is considered not to be highly flammable.
Executive summary:

The objective of the study was to determine if the test item is flammable. The test item was formed into a powder train. It was ignited by a gas flame and the burning rate was determined.

 

Two parallel flammability tests were performed. The tests were negative.

The test item is not highly flammable in the conditions of this test.

Description of key information

The test item is not highly flammable.

Key value for chemical safety assessment

Flammability:
not classified

Additional information

The objective of the study was to determine if the test item is flammable. The test item was formed into a powder train. It was ignited by a gas flame and the burning rate was determined.

 

Two parallel flammability tests were performed. The tests were negative.

The test item is not highly flammable in the conditions of this test.

Justification for classification or non-classification