Registration Dossier

Physical & Chemical properties

Partition coefficient

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
partition coefficient
Type of information:
experimental study
Adequacy of study:
key study
Study period:
August 08, 2017 - August 30, 2017
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
equivalent or similar to
Guideline:
other: OECD 105
Deviations:
not applicable
Principles of method if other than guideline:
OECD 105
GLP compliance:
no
Type of method:
flask method
Partition coefficient type:
octanol-water
Analytical method:
high-performance liquid chromatography
Key result
Type:
log Pow
Partition coefficient:
-1
Temp.:
20 °C
Remarks on result:
other: pH not determined

Preliminary visual estimation of the n-octanol solubility

Defined amounts of the test item were stirred with increasing volumes of n-octanol at room temperature and visually checked for any undissolved parts.


Table4: Results of the preliminary visual estimation of the n-octanol solubility

Amount of test item

/ mg

Total volume of n-octanol

/ ml

Stirring time

/ h

Appearance of mixture

15.6

10

1

dissolved

17.8

10

0.5

dissolved

20.5

10

0.5

dissolved

22.6

10

1.5

dissolved

422.8

10

22

Not dissolved

According to this preliminary test the solubility of the test item in n-octanol was below 50 g/L (without correction for the purity).

Calculation of the partition coefficient log POW from the preliminary test

The partition coefficient POW may be estimated from the saturation concentrations in n-octanol and water. The estimated partition coefficient was calculated with the water solubility data determined in project PS20160642.04 (cS = 74.6 g/L) and the data obtained above. It was calculated to be: log POW < -0.2. The partition coefficient was estimated based on the ratio of the solubilities in water and octanol. The octanol solubility was determined using the flask method.The HPLC method was not applicable due to the low log POW.

Determination of the solubility in n-octanol: Flask method

The individual saturation solubility of the test item in n-octanol was performed within this study. After that, the partition coefficient was estimated based on the ratio of the test item solubility in n-octanol and water. The flask method was performed as described above. The data for the evaluation are given in Table 5. The n-octanol solubility was calculated from the measured and unrounded concentration values and not from the rounded values given in Table5.

 

Table5: n-Octanol solubility experiments of the test item

Experiment

24 h experiment

48 h experiment

72 h experiment

blank

experiment (72 h)

Amount of test item / mg

7.51

7.50

7.54

--

Amount of octanol / ml

30

30

30

30

Stirring time at 30 °C / h

24

48

72

72

Dilution factor

2000

2000

2000

2000

Measured concentration / mg/L

3.76 / 3.76

3.66 / 3.67

2.49 / 2.49

-- / --

Mean concentration / mg/L

3.76

3.67

2.49

--

n-Octanol solubility / mg/L

7.5

7.3

5.0

--

The n-octanol solubilities values of the experiments with 24 h an 48 h stirring times are in agreement. In contrast the experiment with stirring times of 72 h showed a significant lower n-octanol solubility. As a conservative approach the highest value of the n-octanol solubility was stated. It was determined to be 7.5 g/L without correction of the purity.

Calculation of the partition coefficient log POW from the individual solubilities

In the project PS20160642.04 the water solubility of the test item at 20 °C was determined to be (cS = 74.6 g/L). Within this project the n-octanol solubility of the test item at 20 °C was determined to be 7.5 g/L.

The partition coefficient POW of the test item was determined to be: 

log POW = -1.0

Executive summary:

The partition coefficient (n-octanol/water) of the test item was estimated based on the ratio of the individual solubilities of the test item in water and n-octanol. The solubilities were determined according to the flask method.

It was found to be (without correction of the purity):

 

log POW = -1.0

Description of key information

The partition coefficient (n-octanol/water) of the test item was estimated based on the ratio of the individual solubilities of the test item in water and n-octanol. The solubilities were determined according to the flask method.

It was found to be (without correction of the purity):

 

log POW = -1.0

Key value for chemical safety assessment

Log Kow (Log Pow):
-1
at the temperature of:
20 °C

Additional information