Registration Dossier

Administrative data

First-aid measures

Description of First Aid Measures
Eye Contact: Immediately flush eyes with water for at least 15 minutes. Get medical attention.
Skin Contact: Remove clothing and wash affected skin with soap and water. This material may not be
completely removed by conventional laundering. Consult professional laundry service. Do not
home launder. If irritation occurs or persists, get medical attention.
Ingestion: Get medical attention immediately. Do not induce vomiting unless directed by medical
personnel. Never give anything by mouth to an unconscious person
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. Get medical attention
immediately.

Fire-fighting measures

Extinguishing Media: Use water spray, foam, dry powder, or carbon dioxide.
Special Hazards Arising from the Substance or Mixture
Hazardous Combustion
Products:
Emits toxic fumes of carbon monoxide, carbon dioxide, oxides of nitrogen, sulfur oxides, and
other sulfur-containing compounds
Fire / Explosion Hazards: Very high sensitivity of a dust cloud to ignition, based on minimum ignition energy.
Advice for Fire-Fighters
Wear approved positive pressure, self-contained breathing apparatus and full protective turn out gear.

Accidental release measures

Personal Precautions, Protective Equipment and Emergency Procedures
Personnel involved in clean-up should wear appropriate personal protective equipment (see Section 8). Minimize exposure.
Environmental Precautions
Place waste in an appropriately labeled, sealed container for disposal. Care should be taken to avoid environmental release.
Methods and Material for Containment and Cleaning Up
Measures for Cleaning /
Collecting:
Contain the source of the spill if it is safe to do so. Collect spilled material by a method that
controls dust generation. Avoid use of a filtered vacuum to clean spills of dry solids, due to the
potential for electrostatic discharge and very high sensitivity to ignition. Clean spill area
thoroughly.
Additional Consideration for
Large Spills:
Non-essential personnel should be evacuated from affected area. Report emergency
situations immediately. Clean up operations should only be undertaken by trained personnel.

Handling and storage

7. HANDLING AND STORAGE
Precautions for Safe Handling
Ground and bond all bulk transfer equipment. Avoid open handling. Minimize dust generation. Use local exhaust ventilation or
perform work under fume hood/fume cupboard. Avoid inhalation and contact with skin, eye, and clothing. When handling, use
appropriate personal protective equipment (see Section 8). Wash hands and any exposed skin after removal of PPE. Releases
to the environment should be avoided. Review and implement appropriate technical and procedural waste water and waste
disposal measures to prevent occupational exposure or environmental releases. Potential points of process emissions of this
material to the atmosphere should be controlled with dust collectors, HEPA filtration systems or other equivalent controls. Refer
to Section 12 - Ecological Information, for information on potential effects on the environment.
Conditions for Safe Storage, Including any Incompatibilities
Storage Conditions: Store in a cool, dry, well-ventilated area. Keep container tightly closed when not in use.
Storage Temperature: Store at ambient temperature

Transport information

Land transport (ADR/RID)

UN number:
not listed
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
not listed
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
not listed
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Analytical Method: Analytical method available. Contact Pfizer Inc for further information.
Exposure Controls Engineering Controls: Engineering controls should be used as the primary means to control exposures. Use process containment, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits.
Personal Protective Equipment: Refer to applicable national standards and regulations in the selection and use of personal protective equipment (PPE).
Hands: Wear impervious gloves as minimum protection.
Eyes: Wear safety goggles as minimum protection.
Skin: Wear impervious protective clothing when handling this compound.
Respiratory protection: If the applicable Occupational Exposure Limit (OEL) is exceeded, wear an appropriate respirator with a protection factor sufficient to control exposures to below the OEL.

Stability and reactivity

Reactivity: No data available
Chemical Stability: Stable at ambient temperatures
Possibility of Hazardous Reactions
Oxidizing Properties: No data available
Conditions to Avoid: Eliminate possible ignition sources (e.g., heat, sparks, flame, impact, friction, electrostatic
discharge).
Incompatible Materials: As a precautionary measure, keep away from strong oxidizers
Hazardous Decomposition
Products:
None expected under normal conditions.

Disposal considerations

SIDERATIONS
Waste Treatment Methods: Dispose of waste in accordance with all applicable laws and regulations. Member State
specific and Community specific provisions must be considered. Considering the relevant
known environmental and human health hazards of the material, review and implement
appropriate technical and procedural waste water and waste disposal measures to prevent
occupational exposure and environmental release. It is recommended that waste minimization
be practiced. The best available technology should be utilized to prevent environmental
releases. This may include destructive techniques for waste and wastewater.