Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 947-340-4 | CAS number: -
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- density
- Remarks:
- density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2011-12-06 - 2012-01-23
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: The GLP study was conducted according to an internationally accepted guideline. All study parameters are given in detail.
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 109 (Density of Liquids and Solids)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- pycnometer method
- Type:
- density
- Density:
- 1.283 g/cm³
- Temp.:
- 20 °C
- Conclusions:
- Using the pycnometer method, a density of
1.2830 ± 0,0003 g/cm3 at 20.0 ± 0.4 °C
was measured. This value is the mean of two independent determinations with the maximum error of determination.
Standard deviation was 0.0013 g/cm3, showing good correlation of the two determinations. - Executive summary:
The density of Ukanol FR 70 was determined according to OECD test method 109 using the pycnometer method. A density of 1.2830 ± 0,0003 g/cm3 at 20.0 ± 0.4 °C was measured. This value is the mean of two independent determinations with the maximum error of determination. Standard deviation was 0.0013 g/cm3, showing good correlation of the two determinations.
Reference
Description of key information
The density of Ukanol FR 70 was determined according to OECD test method 109 using the pycnometer method. A density of 1.2830 ± 0,0003 g/cm3 at 20.0 ± 0.4 °C was measured. This value is the mean of two independent determinations with the maximum error of determination. Standard deviation was 0.0013 g/cm3, showing good correlation of the two determinations.
Key value for chemical safety assessment
- Relative density at 20C:
- 1.28
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
