Registration Dossier

Administrative data

First-aid measures

Description of first aid measures:
General advice: Take the victim out of the contaminated area. Remove contaminated clothing immediately and dispose of safely.
If inhaled: Move to fresh air. Make the victim blow his nose. Seek medical advice.
In case of skin contact: Rinse immediately with plenty of water for at least 15 minutes. Seek medical advice.
In case of eye contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical advice.
If swallowed: Do not induce vomiting. Make the victim rinse his mouth with water. Seek medical advice.

Most important symptoms and effects, both acute and delayed
Symptoms: No information available.

Treatment: No data available. Treat symptomatically.

Fire-fighting measures

Extinguishing media:
Suitable extinguishing media: All means (e.g. water, carbon dioxide, dry chemical extinguisher).
Unsuitable extinguishing media: Strong water jet.

Special hazards arising from the substance or mixture:
In case of fire, the product may emit toxic and/or irritating fumes.
Supposed thermal decomposition/oxidation: Carbon monoxide and carbon dioxide

Advice for firefighters:
Special protective equipment: Use self-contained breathing apparatus.
Further information: Avoid discharging extinguishing water in the environment. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Particle full face respirator or powered air purifying respirator. Suitable gloves. Dedicated work clothes.

Environmental precautions:
Avoid spreading of product.

Methods and materials for containment and cleaning up:
General advice: Sweep and shovel the solid product into a container specially adapted for its recovery or destroying (avoiding dust formation). Close and label thoroughly.
Cleaning of contaminated zone: After cleaning up the product, rinse the polluted area with water.
Elimination of recovered materials: Deliver to the Environmental service of the factory or to any specialized and approved disposal company.

Reference to other sections:
Additional advice: Evacuation of area and intervention of special services recommended.

Handling and storage

It is recommended to consider in the risk assessment process the occupational exposure limit values foreseen by ACGIH for inert powders not otherwise classified (PNOC respirable fraction: 3 mg / mc; PNOC inhalable fraction: 10 mg / mc). If these limits are exceeded, we recommend using a type P filter whose class (1, 2 or 3) must be chosen according to the outcome of the risk assessment.

Precautions for safe handling:
Advice on safe handling (industrial scale): Local ventilation and emission point fume extraction. Enclosed transfer recommended. Take precautionary measures against electrostatic loading. Earth vessels and equipment well.
Advice on safe handling (laboratory scale): Handling in a hood.

Conditions for safe storage, including any incompatibilities:
Requirements for storage rooms and vessels: Keep in a cool, well-ventilated place.
Advice on common storage: Do not store with strong oxidizing agents.
Further information on storage conditions: Keep in a well closed container, away from moisture and light.
Storage temperature : Keep at ambient temperature.
Advised packaging material: Glass, plastic, stainless steel.
Standard packaging: Cardboard barrel with plastic bag.
Sensitivity
Light: The product is sensitive to light.
Humidity: Hygroscopic.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all

Additional transport information

Additional transport information
The following refers to all modes of transportation unless specified below.
Not regulated for transport under USDOT, EUADR, IATA, or IMDG regulations.

Exposure controls / personal protection

Personal protection equipment
(IMPORTANT: to be adapted following the workplace risk assessment.)
Special recommendations: Pregnant women, seek medical advice before handling.

Industrial workplace
respiratory protection: Particle filter (P3) half mask recommended.
Hand protection: Suitable gloves.
Glove material : Nitrile rubber
Layer thickness : 0,11 mm
Break through time: > 480 min
Eye/face protection: See respiratory protection.
Body Protection: Dedicated working clothes recommended.
Hygiene measures: Wash hands.

Laboratory
Respiratory protection: Handling in a hood.
Hand protection: Suitable gloves.
Eye/face protection: Safety glasses
Body Protection : Working clothes.
Hygiene measures: Wash hands.

Stability and reactivity

Safety remarks: Dust may be explosive (no data available).
Reactivity: No data available.
Chemical stability: No data available.
Possibility of hazardous reactions: None to our knowledge.
Conditions to avoid: No data available.
Incompatible materials: Strong oxidizing agents.
Hazardous decomposition products: Supposed thermal decomposition/oxidation:Carbon monoxide and carbon dioxide

Disposal considerations

Product: Deliver to the Environmental service of the factory or to any specialized and approved disposal service. Incineration in accordance with laws.
Uncleaned packaging: Deliver to the Environmental service of the factory or to any specialized and approved disposal service. Incineration in accordance with laws.