Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

1) Description of first aid measures
General advice :
Seek medical advice in case of symptoms caused by eye or skin contact, inhalation or swallowing.

If inhaled:
Move to fresh air.

In case of skin contact:
Remove contaminated or saturated clothing.
Wash off with plenty of water.

In case of eye contact:
Rinse thoroughly with plenty of water, also under the eyelids.

If swallowed:
Rinse mouth.
Drink plenty of water.

2) Most important symptoms and effects, both acute and delayed
To the best of our knowledge, experiences about acute systemic health effects in human beings are not available.

3) Indication of any immediate medical attention and special treatment needed
No specific antidote known.
Symptomatic treatment.
If necessary, administer activated charcoal (10-20g) and sodi-um sulfate (Glauber salt, 20g).

Fire-fighting measures

1) Extinguishing media
Suitable extinguishing media:
Carbon dioxide (CO2)
Dry powder
Alcohol-resistant foam
Water spray

2) Special hazards arising from the substance or mixture
Specific hazards during fire-fighting:
Hazard-determining flue gases might develop in case of fire:
nitrous gases
Carbon oxides

3) Advice for firefighters
Special protective equipment for firefighters:
In the case of fire, wear respiratory protective equipment in-dependent of surrounding air and chemical protective suit.

Further information:
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Accidental release measures

1) Personal precautions, protective equipment and emergency procedures
Personal precautions:
Wear personal protective equipment; see section "Exposure controls/personal protection"

2) Environmental precautions
Environmental precautions:
Prevent substance from entering soil, natural bodies of water and sewer systems.

3) Methods and material for containment and cleaning up
Methods for cleaning up:
Sweep up and shovel into suitable containers for disposal.
Avoid dust formation.

4) Reference to other sections

Handling and storage

1) Precautions for safe handling
Advice on safe handling:
Provide appropriate exhaust ventilation at machinery.
Avoid dust formation.
Avoid contact with skin, eyes and clothing.
Handle in accordance with good industrial hygiene and safety practice.

Advice on protection against fire and explosion:
Considerable danger of dust explosion
Avoid dust formation. Keep away from heat and sources of ignition.

Hygiene measures:
Wash hands before breaks and immediately after handling the product.
Do not eat, drink or smoke during use.
Keep away from food, drink and animal feedingstuffs.

Dust explosion class:

2) Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers:
Keep tightly closed in a dry, cool and well-ventilated place.

Advice on common storage:
Incompatible with strong acids and bases.

Packaging material:
Suitable material: polyethylene

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1) Control parameters
No substance-specific limiting value being known.

2) Exposure controls
Engineering measures: Provide adequate ventilation.

Personal protective equipment
Eye protection:
Safety glasses

Hand protection
Material: Chloroprene
Break through time: 480 min
Glove thickness: 0,6 mm
Directive: DIN EN 374

Material: Nitrile ubber
Break through time: 480 min
Glove thickness: 0,4 mm
Directive: DIN EN 374

Skin and body protection:
protective clothing

Respiratory protection:
Use suitable respiratory protection in the presence of dust.
Recommendation: Dust mask FFP3 or P3 particle filter

Stability and reactivity

1 Reactivity
2 Chemical stability
No decomposition if stored and applied as directed.

3 Possibility of hazardous reactions
No hazardous reactions are known if properly handled and stored.

4 Conditions to avoid
> 200 °C
Liberation of flammable gases.

5 Incompatible materials
Materials to avoid:
Oxidizing agents
Strong acids and strong bases

6 Hazardous decomposition products
Hazardous decomposition products formed under fire conditions., Ammonia, Carbon oxides, Ni-trogen oxides (NOx)

Disposal considerations

13.1 Waste treatment methods
Must be brought to an adequate waste treatment facility, in conformity with applicable waste disposal regulations.

Contaminated packaging:
Packaging, that can not be reused after cleaning must be disposed or recycled in accordance with all federal, national and local regulations.