Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

In case of skin contact:
Immediately take off all contaminated clothing.
Remove contaminated clothing immediatley and dispose off safely.
After contact with skin, wash immediately with soap and plenty of water.

OBTAIN IMMEDIATE MEDICAL ATTENTION.
In case of persistent skin irritation consult a doctor.

In case of eyes contact:
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an opthalmologist
immediately.
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an opthalmologist
immediately.
Protect uninjured eye.

In case of Ingestion:
Do not induce vomiting, get medical attention showing the SDS and label hazardous.
Give nothing to eat or drink.

In case of Inhalation:
In case of inhalation, consult a doctor immediately and show him packing or label.
Remove casualty to fresh air and keep warm and at rest.
If breathing is irregular or stopped, administer artificial respiration.
If breathing stops, apply artificial respiration.

Most important symptoms and effects, both acute and delayed
Eye irritation
Eye damages
Skin Irritation
Erythema

Indication of any immediate medical attention and special treatment needed
In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet if possible).

Fire-fighting measures

Extinguishing media
Suitable extinguishing media:
Foam, extinguishing powder, sprinkling water jet, carbon dioxide.
Extinguishing media which must not be used for safety reasons:
None in particular.

Special hazards arising from the substance or mixture
Do not inhale explosion and combustion gases.
Hazardous combustion products:
Hydrochloric acid (HCl); Phosgene (COCl2); Carbon monoxide

Advice for firefighters
Wear suitable protective clothing (helmet, protective clothings, goggles, fire resistant gloves, boots) and protect respiratory organs (self contained breathing apparatus).
Use suitable breathing apparatus .
Keep containers cool with water spray.
Move undamaged containers from immediate hazard area if it can be done safely.
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Fire residues and contaminated firefighting water must be disposed of in accordance within the local regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Wear personal protection equipment.
Wear breathing apparatus if exposed to vapours/dusts/aerosols.
Provide adequate ventilation.
Use appropriate respiratory protection.
See protective measures under "Exposure control/personal protection"

Environmental precautions
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains.
Retain contaminated washing water and dispose it.
In case of gas escape or of entry into waterways, soil or drains, inform the responsible authorities.

Methods and material for containment and cleaning up
Wash with plenty of water.
Suitable material for taking up: absorbing material, organic, sand
Dispose of the collected material in accordance with the current regulations.

Reference to other sections
See "Exposure control/personal protection" and "Disposal considerations"

Handling and storage

Precautions for safe handling
Avoid contact with skin and eyes, inhaltion of vapours and mists.
Exercise the greatest care when handling or opening the container.
Use localized ventilation system.
Don't use empty container before they have been cleaned.
Before making transfer operations, assure that there aren't any incompatible material residuals in the containers.
Advice on general occupational hygiene:
Contamined clothing should be changed before entering eating areas.
Do not eat or drink while working.
See also section "Exposure controls/personal protection" for recommended protective equipment.

Conditions for safe storage, including any incompatibilities
Keep away from food, drink and feed.
Keep containers tightly closed and properly labelled.
Incompatible materials:
Keep away from water or from damp surroundings.; Keep away from oxidizing agents; Keep away from amines.
Instructions as regards storage premises:
Adequately ventilated premises.

Specific end use(s)
Recommendation(s)
None in particular
Industrial sector specific solutions:
None in particular
in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4).

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
No data available

Exposure controls
Individual protection measures:
Personal protective equipment selections vary based on potential exposure conditions and working conditions.
The final choice of protective equipment will depend upon a risk assessment.
Personal protective equipment (PPE) should meet recommended national standards. Check with PPE suppliers.
Please see both sections 5 and 6 for information about personal protective equipment to be worn in an emergency (e.g.: fire or unintentional release of the substance).

Eye protection:
Safety glasses(Conforming to UNI EN 166)

Protection for skin:
Chemical protection clothing.; Technical reference standard: UNI EN 13034

Protection for hands:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Glove suitability and breakthrough time will differ depending on the specific use conditions.
Contact the glove manufacturer for specific advice on glove selection and breakthrough times for your use conditions.
Wear suitable gloves tested to EN374.; Suitable gloves type:; Neoprene (Recommended thickness of the material: > 0.7 mm Permeation time: > 480 min)

Respiratory protection:
Depending on the potential for exposure, select respiratory protective equipment suitable for the specific conditions of use and in compliance with current legislation.
Respiratory protection mask in the event of high concentrations.; Short term: filter apparatus, filter A. (DIN EN 14387)

Thermal Hazards:
No information available.

Environmental exposure controls:
Comply with the applicable environmental regulations limiting discharge to air, water and soil.

Hygienic and Technical measures
The substance/product is registered with strictly controlled conditions as defined in Article 18(4) of Regulation (EC) No. 1907/2006 (REACH Regulation) and must therefore be handled as such.

Stability and reactivity

Reactivity
Stable under normal conditions.

Chemical stability
Stable under normal conditions.

Possibility of hazardous reactions
Reactions with amines.; Reactions with oxidants.; Reactions with water.

Conditions to avoid
Moisture; Heat

Incompatible materials
See "Handling and storage" section

Hazardous decomposition products
Hydrochloric acid (HCl).; Carbon monoxide.; Irritating gases/vapours.

Disposal considerations

Waste treatment methods
Recover, if possible. Send to authorised disposal plants or for incineration under controlled conditions. In so doing, comply with the local and national regulations currently in force.