Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Symptoms and effects: No typical symptoms and effects known.
First aid
General: In all cases of doubt, or when symptoms persist, seek medical attention.
Inhalation: Dust may be irritating to the respiratory tract and cause symptoms of bronchitis. Move to fresh air. If symptoms persist, seek medical advice.
Skin: Take off contaminated clothing immediately. Wash immediately with soap and water. Launder clothes before reuse.
Eye: Rinse thoroughly with plenty of water. Eyelids should be held away from the eyeball to ensure thorough rinsing. Seek medical advice.
Ingestion: Rinse mouth, give water to drink. Do NOT induce vomiting. Seek medical advice.
Advice to physician: Symptomatic treatment is advised.

Fire-fighting measures

Extinguishing media: waterspray, foam, Carbon dioxide, dry chemical powder
Unsuitable extinguishing media: none known.
Hazardous decomposition / combustion products: Nitrous gases may be produced.
Protective equipment: Use self-contained respiratory equipment.
Fire and explosion hazard: In case of fire and/or explosion do not breathe fumes.

Accidental release measures

Personal protection
Respiratory: In case of dust formation use dust mask. Dust exposure limits have to be respected.
Hand: For full contact use, 100% Viton gloves conforming to EN 374, e.g. KCL Vitoject 890 are recommended. If used under conditions other than given above it is recommended that a supplier of CE approved gloves is contacted. These recommendations are only applicable to the chemical as supplied by Akzo Nobel; if mixed with or dissolved in other substances please contact a supplier of CE approved gloves (e.g. KCL International +49 66
59870, fax +49 6659 87155).
Eye: Wear eye/face protection.
Skin and body: Wear suitable protective clothing.
Environmental precautions: Collect as much as possible in a clean container for (preferable) reuse or disposal.
Methods for cleaning up: Flush remainder with water (Absorb the remainder with e.g. vermiculite).

Handling and storage

Handling: Avoid dust generation and exposure to aerosols.
Fire and explosion prevention: In certain concentrations the product may form an explosive dust-air mixture.
Storage requirements: Avoid contact with aluminium, zinc, nickel, copper and copper alloys in combination with humidity/ water.
Other information: Protect product from moisture and wet air. Keep container tightly closed and dry.

Transport information

Land transport (ADR/RID)

UN number:
not relevant
Shippingopen allclose all
Class:
not restricted
Classification code:
not relevant
Packaging group:
not relevant
Labels:
none
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
not relevant
Shippingopen allclose all
Class:
not restricted
Classification code:
not relevant
Packaging group:
not relevant
Labels:
none
Remarksopen allclose all

Marine transport (IMDG)

UN number:
not relevant
Proper shipping name and description:
not relevant
Chemical name:
not relevant
Class:
not restricted
Packaging group:
not relevant
EmS code:
not relevant
Labels:
none
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
not relevant
Proper shipping name and description:
not relevant
Chemical name:
not relevant
Class:
not restricted
Packaging group:
not relevant
Labels:
none
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protection
Respiratory: In case of dust formation use dust mask. Dust exposure limits have to be respected.
Hand: For full contact use, 100% Viton gloves conforming to EN 374, e.g. KCL Vitoject 890 are recommended. If used under conditions other than given above it is recommended that a supplier of CE approved gloves is contacted. These recommendations are only applicable to the chemical as supplied by Akzo Nobel; if mixed with or dissolved in other substances please contact a supplier of CE approved gloves (e.g. KCL International +49 66
59870, fax +49 6659 87155).
Eye: Wear eye/face protection.
Skin and body: Wear suitable protective clothing.

Stability and reactivity

Corrosivity to metals: GLDA-Na4 in certain solutions - depending on pH and certain constituents - may be corrosive to metals. Therefore, each specific liquid product has been tested on corrosivity to metals, and if tested corrosive, this has been indicated on the SDS of the product and will be indicated on the label of the product.

Disposal considerations

Product: According to local regulations.
Contaminated packaging: According to local regulations.