Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

Description of key information

Skin irritation in-vivo

A study was carried out according to test methods EC B.4 and OECD 404 to determine the primary skin irritation index and corrosive effects of the test item in the New Zealand White rabbit. A single 4 -hour application produced a primary irritation index of 0.0. The test item was classified as a non-irritant to rabbit skin. No corrosive effects were noted.

Eye irritation in-vitro

The purpose of this Isolated Chicken Eye Test (ICET) was to evaluate the potential ocular corrosivity or severe irritancy of the test item by its ability to induce toxicity in enucleated chicken eyes. The test item did not cause ocular corrosion or severe irritation in the enucleated chicken eyes. Positive and negative controls showed the expected results.

Key value for chemical safety assessment

Skin irritation / corrosion

Link to relevant study records
Reference
Endpoint:
skin irritation: in vivo
Type of information:
experimental study
Adequacy of study:
key study
Study period:
April - May 1983
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
EU Method B.4 (Acute Toxicity: Dermal Irritation / Corrosion)
Deviations:
no
Qualifier:
according to guideline
Guideline:
OECD Guideline 404 (Acute Dermal Irritation / Corrosion)
Deviations:
no
GLP compliance:
yes
Specific details on test material used for the study:
TEST MATERIAL
- Substance identification/name in the report: P5256
- Aspect: off-white crystalline solid
- Batch no.: E 29.3.83

STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage conditions: Room temperature, protected from light
- Stability under test conditions: stable
- Expiry date: not given
Species:
rabbit
Strain:
New Zealand White
Details on test animals or test system and environmental conditions:
TEST ANIMALS
- Source: Bantin and Kingman Ltd., The Field Station, Grimston, Aldbrough, Hull, HUll 4QE
- Age at study initiation: young adult rabbits, exact age not given
- Weight at study initiation: 2.57 - 2.84 kg
- Housing: individually housed in grid floor cages
- Diet (e.g. ad libitum): Standard Rabbit Diet, Special Diets Services Ltd., Stepfield, Witham, Essex
- Water (e.g. ad libitum): mains water
- Acclimation period: 3 days

ENVIRONMENTAL CONDITIONS
- Temperature (°C): 17 - 20°C
- Humidity (%): 47 - 65%
- Air changes (per hr): single air conditioned room
- Photoperiod (hrs dark / hrs light): onstant daily photoperiod of 14 hours artificial light (06.00 - 20.00) and 10 hours darkness
Type of coverage:
semiocclusive
Preparation of test site:
clipped
Vehicle:
water
Controls:
yes, concurrent vehicle
Amount / concentration applied:
0.5 g test item
Duration of treatment / exposure:
4 hours
Observation period:
24, 48 and 72 hours
Number of animals:
3 animals
Details on study design:
TREATMENT PROCEDURE:
The back of each animal was clipped free of hair the day prior to treatment using electric veterinary clippers (Model A2, Oster, Milwaukee, Wisconsin). A portion of test article (0.5 g moistened with a few drops of distilled water) was applied to an area of skin approximately 6 cm2 on each animal and covered with a gauze patch. The patch was occluded and secured using a strip of impermeable adhesive tape (Sleek, Smith & Nephew, Welwyn Garden City, Herts.). A plastic collar was placed around the neck of each animal to prevent premature removal of the wrappings and ingestion of the test article. Four hours after application the patches were removed and the skin wiped with a disposable paper towel moistened with ater to remove any test article still remaining.

EVALUATION OF EFFECTS:
One hour after removal of the wrappings the skin reactions were scored using the Draize scale. The evaluation was repeated 24, 48 and 72 hours after removal of the patches.
Irritation parameter:
erythema score
Basis:
mean
Time point:
24/48/72 h
Score:
0
Max. score:
0
Irritation parameter:
edema score
Basis:
mean
Time point:
24/48/72 h
Score:
0
Max. score:
0
Irritant / corrosive response data:
Slight erythema was noted in one animal at the 1 hour reading, but this animal was normal at the 24 hour observation. All other animals were normal over the whole 72 hour observation period. A primary irritation index of 0.0 was obtained. No corrosive effects were noted.
Interpretation of results:
GHS criteria not met
Conclusions:
Slight erythema was noted in one animal at the 1 hour reading, but this animal was normal at the 24 hour observation. All other animals were normal over the whole 72 hour observation period. A primary irritation index of 0.0 was obtained. Th test item was regarded as a non-irritant to rabbit skin. No corrosive effects were noted.
Executive summary:

A study was carried out according to test methods EC B.4 and OECD 404 to determine the primary skin irritation index and corrosive effects of the test item in the New Zealand White rabbit. 0.5 g test item, moistened with water, was applied to hair free clipped skin of three female rabbits. Duration of treatment was 4 hours, observation period 24, 48 and 72 hours.

A single 4 -hour application produced a primary irritation index of 0.0. The test item was classified as a non-irritant to rabbit skin. No corrosive effects were noted.

Endpoint conclusion
Endpoint conclusion:
no adverse effect observed (not irritating)

Eye irritation

Link to relevant study records
Reference
Endpoint:
eye irritation: in vitro / ex vivo
Type of information:
experimental study
Adequacy of study:
key study
Study period:
October - December 2014
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
OECD Guideline 438 (Isolated Chicken Eye Test Method for Identifying i) Chemicals Inducing Serious Eye Damage and ii) Chemicals Not Requiring Classification for Eye Irritation or Serious Eye Damage)
Deviations:
no
Qualifier:
according to guideline
Guideline:
EU method B.48 (Isolated chicken eye test method for identifying occular corrosives and severe irritants)
Deviations:
no
GLP compliance:
yes (incl. QA statement)
Specific details on test material used for the study:
TEST MATERIAL
- Substance identification/name in the report: LZ 596
- Molecular formula: C21H30N2
- Batch no.: 1229
- Analysis date: August 12, 2014
- Date of production: August 11, 2014

STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage conditions: Controlled room temperature (15-25ºC, <70 RH%), protected from light and humidity.
- Stability under test conditions: stable for min. 3 years from manufacturing date
- Expiry date: August 10, 2017
- Safety precautions: Routine safety precautions (lab coat, gloves, safety glasses, face mask) for unknown materials were applied to assure personnel health and safety.
Species:
chicken
Strain:
other: ROSS 308
Details on test animals or tissues and environmental conditions:
CHICKEN HEADS COLLECTION & TRANSPORT
- Source: Chicken heads from TARAVIS KFT. 9600 Sárvár, Rábasömjéni út 129. Hungary
- Preparation: Head collection was performed by a slaughter house technician. Heads were removed immediately after sedation of the chickens (sedation was happened by electric current). The heads were transported to the test lab at the earliest convenience for use approximately within 2 hours from collection. The ambient temperature was optimal (19.3 ºC to 20.7ºC) during the transport. All eyes used in the assay were from the same groups of eyes collected on one specific day. After collection, the heads were inspected for appropriate quality and wrapped with paper moistened with saline, then placed in a plastic box that can be closed (4-5 heads/box).
Vehicle:
unchanged (no vehicle)
Controls:
yes, concurrent positive control
yes, concurrent negative control
Amount / concentration applied:
0.03 g test item
Duration of treatment / exposure:
10 seconds
Duration of post- treatment incubation (in vitro):
The test item was stuck on the corneas surface in three eyes at 30 minutes after the post-treatment rinse.
Number of animals or in vitro replicates:
3 eyes treated with thest item
Details on study design:
SELECTION AND PREPARATION OF ISOLATED EYES

EYES COLLECTION:
After removing the head from the plastic box, it was put on soft paper. The eyelids were carefully cut away with scissors, avoiding damaging the cornea. One small drop of fluorescein solution 2 (w/v) % was applied onto the cornea surface for a few seconds and subsequently rinsed off with 20 mL isotonic saline. Then the fluorescein-treated cornea was examined with hand-held slit lamp or slit lamp microscope, with the eye in the head, to ensure that the cornea was not damaged. If the cornea was in good condition, the eyeball was carefully removed from the orbit.

PREPARATION OF EYES:
The eye ball was carefully removed from the orbit by holding the nictitating membrane with a surgical forceps, while cutting the eye muscles with bent scissors. Care was taken to remove the eyeball from the orbit without cutting off the optical nerve too short. The procedure avoided pressure on the eye while removing the eyeball from the orbit, in order to prevent distortion of the cornea and subsequent corneal opacity. Once removed from the orbit, the eye was placed onto damp paper and the nictitating membrane was cut away with other connective tissue. The prepared eyes were kept on the wet papers in a closed box so that the appropriate humidity was maintained.

EYES EXAMINATION & ACCLIMATIZATION TIME:
The prepared eye was placed in a steel clamp with the cornea positioned vertically with the eye in the correct relative position (same position as in the chicken head). Again avoiding too much pressure on the eye by the clamp. Because of the relatively firm sclera of the chicken eyeball, only slight pressure was applied to fix the eye properly. The clamp with the eyeball was transferred to a chamber of the superfusion apparatus. The clamp holding the eye was positioned in such a way that the entire cornea was supplied with saline solution dripping from a stainless steel tube, at a rate of approximately 3 to 5 drops/minutes. The door of the chamber was closed except for manipulations and examinations, to maintain temperature and humidity.
The appropriate number of eyes was selected and after being placed in the superfusion apparatus, the selected eyes were examined again with the slit lamp microscope to ensure that they were in good condition. The focus was adjusted to see clearly the isotonic saline which was flowing on the cornea surface. Eyes with a high baseline fluorescein staining (i.e., > 0.5) or corneal opacity score (i.e., > 0.5) were rejected. The cornea thickness was measured using the depth measuring device on the slit lamp microscope (Haag-Streit BQ 900) with the slit-width set at 9½, equalling 0.095 nm. Any eye with cornea thickness deviating more than 10 % from the mean value for all eyes, or eyes that showed any other signs of damage, were rejected and replaced. If the selected eyes were appropriate for the test, acclimatization started and was conducted for approximately 45 to 60 minutes. The temperature was verified to be in the range of 32 ± 1.5 °C in all chambers during the acclimatization and treatment periods

EQUILIBRATION AND BASELINE RECORDINGS
At the end of the acclimatization period, a zero reference measurement was recorded for cornea thickness and opacity to serve as a baseline (t=0) for each individual eye. The cornea thickness of the eyes should not change by more than ±5-7 % within approximately 45 to 60 minutes before the start of application. Slight changes in thickness (0% to 2%) were observed in the eyes, finding considered as normal when maintaining enucleated eyes. Following the equilibration period, the fluorescein retention was measured. Baseline values were required to evaluate any potential test item related effects after treatment. The location of any minor findings was marked on the record sheet as a drawing, if applicable. If any eye was considered to be unsuitable following baseline assessment, it was discarded.
OF TEST SUBSTANCE
The test item was stuck on the corneas surface in three eyes at 30 minutes after the post-treatment rinse. The gentle rinsing with 20 mL saline was performed in all test item treated eyes after the 30, 75 and 120 minutes of observation. The rinsing was continued only one eye after 180 minutes of observation. The cornea surfaces were totally cleared two eyes out of three at 120 minutes after the post-treatment rinse. However, one out of three test item treated eyes was not totally cleared, little volume of test item was stuck on the cornea surface at 240 min after the post-treatment rinse.
Irritation parameter:
percent corneal swelling
Run / experiment:
1
Value:
0 - 2
Vehicle controls validity:
valid
Negative controls validity:
valid
Positive controls validity:
valid
Remarks on result:
no indication of irritation
Irritation parameter:
cornea opacity score
Run / experiment:
2
Value:
0.5
Vehicle controls validity:
valid
Negative controls validity:
valid
Positive controls validity:
valid
Remarks on result:
no indication of irritation
Irritation parameter:
fluorescein retention score
Run / experiment:
3
Value:
0
Vehicle controls validity:
valid
Negative controls validity:
valid
Positive controls validity:
valid
Remarks on result:
no indication of irritation
Other effects / acceptance of results:
In this in vitro eye irritation study using the isolated chicken eyes test with LZ 596, no ocular corrosion or severe irritation potential was observed. The test item was not a severe irritant.
Interpretation of results:
GHS criteria not met
Conclusions:
The test item did not cause ocular corrosion or severe irritation in the enucleated chicken eyes.
Executive summary:

The purpose of this Isolated Chicken Eye Test (ICET) was to evaluate the potential ocular corrosivity or severe irritancy of the test item by its ability to induce toxicity in enucleated chicken eyes. Each eye which was used in this study was collected in the slaughterhouse, eliminating the need for laboratory animals. The test compound was applied in a single dose onto the cornea of isolated chicken eyes in order to potentially classify the test compound as ocular corrosive and/or severe irritant. The damage by the test substance was assessed by determination of corneal swelling, opacity, fluorescein retention, and morphological effects. These parameters were evaluated pre-treatment and starting at approximately 30, 75, 120, 180, and 240 minutes after the post-treatment rinse. The endpoints evaluated were corneal opacity, swelling, fluorescein retention, and morphological effects. All of the endpoints, with the exception of fluorescein retention (which was determined only at pre-treatment and 30 minutes after test substance exposure) were determined at each of the above time points. The test item and Imidazole (positive control) were applied in an amount of 0.03 g/eye by powdering the entire surface of the cornea attempting to cover the cornea surface uniformly with the test substance or positive control. Three test item treated eyes and three positive control eyes were used in this study. One negative control eye was treated with 30 μL saline solution. After an exposure period of 10 seconds from the end of the application the cornea surface was rinsed thoroughly with ~20 mL saline solution at ambient temperature and this procedure was repeated for each eye. In this ICET, The test item did not cause ocular corrosion or severe irritation in the enucleated chicken eyes. Positive and negative controls showed the expected results. The experiment was considered to be valid. In this in vitro eye corrosives and severe irritants study, using the Isolated Chicken Eye model with LZ 596, no ocular corrosion or severe irritation potential was observed.

Endpoint conclusion
Endpoint conclusion:
no adverse effect observed (not irritating)

Respiratory irritation

Endpoint conclusion
Endpoint conclusion:
no study available

Additional information

Justification for classification or non-classification

According to the UN Globally Harmonised System of Classification and Labelling of Chemicals, the test item does not require classification as a skin or an eye irritant.