Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Contact with skin:

Immediately take off all contaminated clothing.

Areas of the body that have come into contact with the product must be rinsed immediately with plenty of running water and possibly with soap.

If symptoms persist, get medical attention.

Contact with eyes:

Wash immediately with water for at least 15 minutes.

If symptoms occur, get medical attention.

Swallowing:

Do not induce vomiting since this may cause an aspiration hazard in the trachea. GET MEDICAL ATIENTION IMMEDIATELY.

Inhalation:

Under normal conditions the risk of inhalation is very low. In the event of overheating or fire

where fumes, vapour or aerosol are inhaled, immediately remove the victim from the

contaminated premises to a well ventilated area. Get medical attention.

Fire-fighting measures

Recommended extinguishers:

Water spray, C02, foam, dry chemical powders, according to the materials involved In the fire.

Cool the containers exposed to the fire with water.

Extinguishers not to be used:

None in particular.

Risks arising from combustion:

Combustion will produce C02 and CO.

Avoid inhaling the fumes.

Protective equipment:

Use protection for the respiratory tract..

Accidental release measures

Measures for personal safety:

Use gloves and protective dothing.

Environmental measures:

Limit leakages with earth or sand.

If the product is in a liquid form, stop it from entering the drainage system.

If the product has escaped into a water course, into the drainage system, or has contaminated the ground or vegetation, notify the competent authorities.

Cleaning methods:

Recover the product for re-use, if possible, or for elimination. The product might, where appropriate, be absorbed by Inert material.

After the product has been recovered, rinse the area and materials involved with water.

Handling and storage

Handling precautions:

Avoid direct contact.

Do not eat or drink while working.

Incompatible materials:

Keep away from strong oxydizing agents.

Storage conditions:

Keep away from unguarded flame, sparks, and heat sources.

Avoid accumulating electrostatic charge.

The product can be stored in stainless steel or in carbon steel resin lined containers.

Instructions as regards storage premises:

Cool and adequately venblated.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure Iimit(s) (ACGIH):

None

Precautionary measures:

Give adequate ventilation to the premises where the product is stored and/or handled.

Respiratory protection:

Required where ventilation is insufficient or exposure Is prolonged.

Use adequate protective respiratory equipment.

Protection for hands:

Wear nitrile rubber or neoprene gloves.

Breakthrough time of the glove material: always seek advice from glove suppliers.

Eye protection:

It is advisable to wear safety goggles or face shield.

Protection for skin:

It is advisable to wear full protective clothing and chemical boots.

However it is advisable to follow the good working practices.

Stability and reactivity

Conditions to avoid:

Stable under normal conditions.

Keep away from unguarded flame, sparks, and heat sources.

Substances to avoid:

Strong oxidizing agents

Disposal considerations

Recover, where possible. Send to authorised disposal plants or for incineration under controlled conditions. In so doing, comply with the local and national regulations currently In force.