Registration Dossier

Administrative data

First-aid measures

Eye Contact:
Immediately flush eyes with copious amounts of water for at least 15 minutes. If irritation persists, seek medical attention.

Skin Contact:
After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash contaminated clothing before reusing.

Inhalation:
Allow the victim to rest in a well ventilated area. Evacuate the victim to a safe area as soon as possible. Loosen tight clothing such as a collar, tie, belt or waistband. If breathing is difficult, administer oxygen. If the victim is not breathing, perform mouth-to-mouth resuscitation. In severe cases or if symptoms persists, seek medical attention.

Ingestion:
Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. If symptoms appears, seek medical attention.

Fire-fighting measures

Extinguishing media:
In case of fire use water spray, chemical type foam, carbon dioxide, dry chemical. Prevent run off of water from entering drains.

Hazardous combustion products:
The substance evolves toxic fumes due to the presence of CO, CO2.

Fire-fighting equipment:
Respiratory and eye protection for fire-fighting personnel

Accidental release measures

Person-related safety precautions:
- Wear protective equipment
- Keep unprotected persons away

Measures for cleaning / collecting:
- Damp down to avoid dust generation
- Do not allow to enter public sewers and watercourses
- Sweep or shovel-up spillage and remove to a safe place
- Absorb spillage in earth or sand

Handling and storage

This product should be handled only by, or under the close supervision of, those properly qualified in the handling and use of potentially hazardous chemicals, who should take into account the fire, health and chemical hazard data given on this sheet.
- It should always be handled in an efficient fume hood or equivalent system and, if necessary, wear protective equipment.
- Care should be taken to prevent the chemical from coming into contact with the skin or eyes and from contaminating personal clothing.
- Keep in unopened containers in a cool, dry and well ventilated place.
-This material should be handled and stored per label instructions to ensure product integrity.
- Avoid contact with oxidising substances

Transport information

Land transport (ADR/RID)

UN number:
Not classified for the transport.
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not classified for the transport.
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not classified for the transport.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

The substance must be treated only by qualified and trained personnel in the use of hazardous substances, taking into full account the risks in case of fire or dispersion and the health impacts.
Must always be handled in the area with efficient local exhaust ventilation and, if necessary, staff must wear personal protective equipment.
Avoid the substance to comes in contact with skin, eyes and clothing.
Keep the substance in tightly closed containers in a cool dry and well ventilated.
The substance must be treated and stored as prescribed by the label to ensure the integrity of the substance itself.
Avoid having contact with oxidizing substances

Stability and reactivity

Hazardous polimerization not occurs
Conditions to avoid: heat, flames and sparks
Incompatible materials: strong oxidising agents
The product is stable at room temperature and in usual working conditions
Hazardous decomposition products: the substance evolves toxic fumes due to the presence of CO, CO2.

Disposal considerations

Do not empty into drains. Use appropriate containment to avoid environmental contamination. Disposal should be in accordance with local, state or national regulation
Wastes have to be disposed in a site approved for chemical and hazardous waste or burned in a specialised burning centre.