Palladium (II) di(4-oxopent-2-en-2-oate)

Water solubility

Link to relevant study record(s)

Reference

Endpoint:

water solubility

Type of information:

experimental study

Adequacy of study:

key study

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

other: Information from published review article in peer reviewed literature, minor restrictions in design and/or reporting but otherwise adequate for assessment.

Qualifier:

according to guideline

Guideline:

OECD Guideline 105 (Water Solubility)

GLP compliance:

not specified

Type of method:

flask method

Water solubility:

0.011 mg/L

Temp.:

20 °C

pH:

4.2

Remarks on result:

other: +/- 0.0005 g/L

Details on results:

In some cases the PGM concentrations measured by ICP-OES showed a tendency of increasing values at each equilibration time. If the last two vessels varied by less than 15%, the test was deemed satisfactory. If the last two vessels varied by more than 15% then the analysis was repeated with longer equilibration times until the criteria was met.

Conclusions:

The water solubility of bis(acetylacetonato)palladium (II) was reported as 0.0111 g/L at 20°C

Executive summary:

Information from published review article in peer reviewed literature, minor restrictions in design and/or reporting but otherwise adequate for assessment. The water solubility of bis(acetylacetonatio)palladium (II) was reported as 0.0111 g/L at 20°C.

Description of key information

The water solubility of Palladium (II) di(4-oxopent-2-en-2-oate) was reported as 0.0111 g/L at 20°C.

Key value for chemical safety assessment

Water solubility:

0.011 g/L

at the temperature of:

20 °C

Additional information

The paper Gregory (2014) is a published review article in peer reviewed literature and water solubility was determined following OECD guideline 105. The water solubility of palladium (II) di(4 -oxopent-2 -en-2 -oate) was reported as 0.0111 g/L at 20°C.