Registration Dossier

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Ingestion: Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an
unconscious person. Seek immediate medical attention.
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. Destroy contaminated
shoes. Seek immediate medical attention.
Inhalation: Remove to fresh air. Seek immediate medical attention.
Eyes: Immediately flush eyes with water for at least 15 minutes. Seek immediate medical attention.
Overexposure Effects: Causes severe eye irritation and may cause eye burns. Can cause skin irritation and allergic skin reaction.
Can be fatal if inhaled and can be harmful if swallowed.
Medical Conditions Aggravated by Exposure: Allergy, eczema or skin conditions.
Additional Information: Remove contaminated clothing and wash before reuse.

Fire-fighting measures

Fire Fighting Extinguishing Media: Carbon dioxide, foam, dry chemical, water spray.
Fire Fighting Equipment: Use self-contained breathing apparatus.
Fire and Explosion Hazards: Decomposition and combustion products may be toxic. Dusty conditions can lead to explosion

Accidental release measures

Accidental Release Measures: Avoid personal contact. Shovel into approved disposal container. Flush contaminated area with

Handling and storage

Signal Word: Danger!
Precautions: Causes severe eye irritation and may cause eye burns. Can cause skin irritation and allergic skin reaction. Can be
fatal if inhaled and can be harmful if swallowed. Do not get in eyes. Do not breath vapor or mist. Avoid contact with skin and
clothing. Avoid tasting or swallowing. Keep container closed when not in use. Use with adequate ventilation. Wash thoroughly
after handling. Notice! Possible reproductive health hazard. Overeposure may cause male reproductive disorders.
Storage Information: Store in tightly closed containers in cool, dry area. This resin should under no circumstances be heated to
more than 120°C for more than 12 hours. Hazardous autopolymerisation may occur with larger amounts of the material in
containers that are not heat controlled. Also, there is a risk of violent reaction of molten resin with water.
Storage hazard class : Storage class 13, Solid materials, not dangerous

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
not dangerous
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shipping information
Proper shipping name and description:
(TGIC) EC-No.: 219-514-3 / CAS-no. 2451-62-9
Chemical name:
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal Protective Equipment: Wear protective equipment to prevent all exposure and personal contact.
Skin Protection: Wear impervious gloves.
Material of gloves for long term application (BTT>480 min):
Butyl rubber Ethyl Vinyl Alcohol Laminate (EVAL) Material of gloves for short term/splash application (10
minNitrile rubber Use gloves approved to relevant standard. e.g. EN 374 (Europe), F739 (US).
Suitability and durability of a glove is dependent on usage, e.g. frequency and duration of contact, chemical resistance of glove
material and dexterity. Always seek advice from glove suppliers.
Additonal information can be found for instance at
Respiratory Protection: Use NIOSH approved dust respirator during all operations with a potential for generating dust.
In case of insufficient ventilation wear suitable respiratory
equipment. Filter type AX-P3 (organic vapours, particles)
Eye Protection: Wear side-shield goggles or full face shield.
Engineering Controls: Good general mechanical ventilation and local exhaust are required to meet the recommended TWA.

Stability and reactivity

Conditions to Avoid: At elevated temperatures, material may undergo rapid exothermic reaction leading to decomposition.
Stability: Stable.
Incompatibility: Strong oxidizers, acids and alkalies. Heated resin may react with water.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, aldehydes, nitrogen oxides.
Hazardous Polymerization: May occur.
Note: Take necessary action to avoid static electricity discharge.

Disposal considerations

Waste Disposal Method: Dispose in accordance with federal, state and local regulations