Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 209-876-0 | CAS number: 596-03-2
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Skin irritation / corrosion
Administrative data
- Endpoint:
- skin irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- December 04, 2017 to March 13, 2018
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Justification for type of information:
- Data is from experimental study report
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 018
- Report date:
- 2018
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
- Principles of method if other than guideline:
- The purpose of this study is to provide classification of dermal irritation potential of a chemical by using a three-dimensional human epidermis model, according to the OECD Test Guideline No. 439, “In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method”.
- GLP compliance:
- yes
Test material
- Reference substance name:
- 4',5'-dibromo-3',6'-dihydroxyspiro[isobenzofuran-1(3H),9'-[9H]xanthene]-3-one
- EC Number:
- 209-876-0
- EC Name:
- 4',5'-dibromo-3',6'-dihydroxyspiro[isobenzofuran-1(3H),9'-[9H]xanthene]-3-one
- Cas Number:
- 596-03-2
- Molecular formula:
- C20H10Br2O5
- IUPAC Name:
- 4',5'-dibromo-3',6'-dihydroxy-3H-spiro[2-benzofuran-1,9'-xanthen]-3-one
- Test material form:
- solid: particulate/powder
- Details on test material:
- IUPAC name : 4',5'-dibromo-3',6'-dihydroxy-3H-spiro[2-benzofuran-1,9'-xanthene]-3-oneMolecular weight : 490.102 g/molMolecular formula: C20H10Br2O5Physical property: Orange powder substance type: organicInChI:1S/C20H10Br2O5/c21-15-13(23)7-5-11-17(15)26-18-12(6-8-14(24)16(18)22)20(11)10-4-2-1-3-9(10)19(25)27-20/h1-8,23-24HSmiles:C12(c3c(Oc4c1ccc(c4Br)O)c(c(O)cc3)Br)c1c(cccc1)C(O2)=O
Constituent 1
- Specific details on test material used for the study:
- IUPAC name : 4',5'-dibromo-3',6'-dihydroxy-3H-spiro[2-benzofuran-1,9'-xanthene]-3-oneMolecular weight : 490.102 g/molMolecular formula: C20H10Br2O5Physical property: Orange powder substance type: organicInChI:1S/C20H10Br2O5/c21-15-13(23)7-5-11-17(15)26-18-12(6-8-14(24)16(18)22)20(11)10-4-2-1-3-9(10)19(25)27-20/h1-8,23-24HSmiles:C12(c3c(Oc4c1ccc(c4Br)O)c(c(O)cc3)Br)c1c(cccc1)C(O2)=O- Source and lot/batch No.of test material:OC05/19,AV0342- Expiration date of the lot/batch: - Purity:92.30RADIOLABELLING INFORMATION (Not applicable)- Radiochemical purity: N/A- Specific activity: N/A- Locations of the label: N/A- Expiration date of radiochemical substance: N/ASTABILITY AND STORAGE CONDITIONS OF TEST MATERIAL- Storage condition of test material: Room temperature or Fridge storage- Stability under test conditions: No data available- Solubility and stability of the test substance in the solvent/vehicle: No data available- Reactivity of the test substance with the solvent/vehicle of the cell culture medium: No data availableTREATMENT OF TEST MATERIAL PRIOR TO TESTING- Treatment of test material prior to testing: Test articles is tested as provided (neat).- Preliminary purification step (if any): No data available- Final dilution of a dissolved solid, stock liquid or gel: No data available- Final preparation of a solid: No data availableFORM AS APPLIED IN THE TEST: SolidOTHER SPECIFICS: No data available
In vitro test system
- Test system:
- human skin model
- Remarks:
- MatTek EpiDerm™ Tissue Model
- Source species:
- human
- Cell type:
- non-transformed keratinocytes
- Cell source:
- other: EpiDerm™ 3-dimensional human tissues used in this study
- Source strain:
- other: Not applicable
- Details on animal used as source of test system:
- EpiDerm™ tissues, Lot No. 27646 Kits I and J, were received from MatTek on 12 Dec 2017, and Lot No. 27654 Kits O and P, were received from MatTek on 19 Dec 2017. All tissues were refrigerated at 2-8°C upon receipt. Before use, the tissues were incubated (37±1°C, 5±1% CO2) with assay medium (MatTek) for a one-hour equilibration. The tissues were then moved to new wells with fresh medium for an additional overnight equilibrium, for 18±3 hours. Equilibration medium was replaced with fresh medium before dosing.
- Justification for test system used:
- The EpiDerm™ Skin Model closely parallels human skin, thus providing a useful in vitro means to assess dermal irritancy and toxicology
- Vehicle:
- unchanged (no vehicle)
- Details on test system:
- EpiDerm™ Tissue SamplesEpiDerm™ tissues, Lot No. 27646 Kits I and J, were received from MatTek on 12 Dec 2017, and Lot No. 27654 Kits O and P, were received from MatTek on 19 Dec 2017 All tissues were refrigerated at 2-8°C upon receipt. Before use, the tissues were incubated (37±1°C, 5±1% CO2) with assay medium (MatTek) for a one-hour equilibration. The tissues were then moved to new wells with fresh medium for an additional overnight equilibrium, for 18±3 hours. Equilibration medium was replaced with fresh medium before dosing.Mesh CompatibilityFive of the test articles supplied were liquids. These test articles were assessed for compatibility with pre-cut nylon mesh supplied with the tissues. The mesh was placed on a slide and 30 μl of a liquid test articles or PBS (negative control) were applied. After 60 minutes of exposure, the mesh was checked microscopically. If no damage or other interaction was observed, indicating that the mesh was compatible with the test article, the mesh was used as a spreading aid.Tissue Viability (MTT Reduction)At the end of the incubation period, each EpiDerm™ tissue was rinsed with PBS and transferred to a 24-well plate containing 300 μl of MTT solution (1 mg/ml MTT in DMEM). The tissues were then returned to the incubator for a three-hour MTT incubation period. Following the MTT incubation period, each EpiDerm™ tissue was rinsed with PBS and then treated with 2.0 ml of extractant solution (isopropanol) per well for at least two hours, with shaking, at room temperature. Two aliquots of the extracted MTT formazan were measured at 540 nm using a plate reader (μQuant Plate Reader, Bio-Tek Instruments, Winooski, VT).For several tissues, the test article had stained the tissues. Therefore, the tissues were extracted with only 1.0 ml, allowing extraction to occur only through the bottom of the insert. After the extraction period, the tissue insert was removed and discarded and 1.0 ml of extraction solution were added to each well, bringing the volume to a total of 2.0 ml.Quality ControlsThe assay meets the acceptance criteria if the mean OD540 of the negative control tissues is between 1.0 and 2.5, inclusive, and the mean viability of positive control tissues, expressed as percentage of the negative control tissues, is at least 20%. In addition, the standard deviation (SD) calculated from individual percent tissue viabilities of the three identically-treated replicates must be less than 18%.Note: Chemicals that provide tissue viabilities in a range of 30% to 70% may provide high SD. If the high SD (above acceptance limits) is typical for the chemical and the classification of the chemical is consistent in all independent runs, MatTek recommends that this result be accepted, although it did not meet the Assay Acceptance Criterion.Analysis of DataSee Table 1 for Experimental Data. The mean absorbance value for each time point was calculated from the optical density (OD) of the duplicate samples and expressed as percent viability for each sample using the following formula:% viability = 100 X (OD sample/OD negative control)Skin Irritation PredictionAccording to the EU1,2 and GHS3 classification (R38 / Category 2 or no label), an irritant is predicted if the mean relative tissue viability of three individual tissues exposed to the test substance is 50% or less of the mean viability of the negative controls.In vitro result In vivo ClassificationMean tissue viability ≤ 50% Category 2Mean tissue viability > 50% Non-irritant (NI)Assessment of direct MTT reduction and assessment of coloring or staining materials was not performed. Therefore, it cannot be fully assessed if the test articles interfered with MTT viability measurements.Retention of DataUpon signing the final report, all raw data, supporting documentation and reports are submitted to the Archivist by the Study Director. The raw data are filed at MB Research by project number. The final report is filed at MB Research by Sponsor name and MB project number.All data generated during the conduct of this study will be archived at MB Research for at least one year from the date of the final report and optionally longer at additional cost. The Sponsor will be contacted in writing to determine final disposition of the records.Any remaining test article will be discarded upon submission of the report.Amendment to the ProtocolThere were no amendments to the protocol. See Appendix C for the protocol in its entiretyEvaluation of Test Article in the Cell Models:1. Cell system: Upon receipt, the MatTek EpiDerm™ tissue cultures were placed in 0.9 mL of fresh Maintenance medium (in a 6-well plate). The culture inserts are incubated for ~one hour. The tissues were then transferred to 6-well plates containing 0.9 mL fresh Maintenance medium and they were incubated overnight at ~37°C, 5% CO2 in a humidified incubator.2. Control and Test Article Exposures: On the day of dosing, the tissues are then removed from the incubator and the controls and the test article are applied topically to tissues by pipette. Tissues were exposed to controls and the test articles for one hour, with ~35 minutes in a 37°C, 5% CO2 humidified incubator and the remaining 25 minutes at room temperature.a) Controls30 µL of negative control DPBS, positive control 5% SDS was applied topically to the tissue and gently spread by placing a nylon mesh on the apical surface of each tissue, if necessary.b)Test ArticleFor solid test article, the tissues were moistened with 25 μL of ultrapure water to improve contact of the tissue surface with the test article. Approximately 25 mg of each test article was evenly applied to the apical surface of each tissue (n=3). All the tissues were placed into the ~37°C incubator with 5% CO2. The exposure times were approximately 1 hour, with ~35 minutes exposure in the incubator and ~25 minutes at room temperature. 3.Post-exposure treatmentAfter the 1 hour exposure, the tissues were rinsed 20 to 25 times with 1 mL of DPBS. The apical surface was gently blotted with a cotton swab. The tissues were placed in 0.9 mL of fresh Maintenance medium (6-well plate) for either 25 hours, 38 minutes and 23 seconds or for 24 hours, 10 minutes and 09 seconds (as there were numerous tissues, they had to be broken down into 2 sets to complete dosing in a timely manner). After this initial ~24 hour incubation, the tissues were placed in 6-well plates containing 0.9 mL fresh Maintenance medium and incubated for another 17 hours, 03 minutes and 34 seconds prior to performing the MTT assay, for a total of an approximately 42 hour post-exposure incubation.RECONSTRUCTED HUMAN EPIDERMIS (RHE) TISSUE- Model used: The EpiDerm™ 3 dimensional human tissue model- Tissue Lot number(s): 26459- Date of initiation of testing: 6/08/2017TEMPERATURE USED FOR TEST SYSTEM- Temperature used during treatment / exposure: 37°C- Temperature of post-treatment incubation (if applicable): 37°CREMOVAL OF TEST MATERIAL AND CONTROLS-Volume and number of washing steps: TwiceMTT DYE USED TO MEASURE TISSUE VIABILITY AFTER TREATMENT / EXPOSURE- MTT concentration: 300 µL MTT medium (1.0 mg/mL).- Incubation time: After 2 hours, 57 minute and 25 second MTT incubation- Spectrophotometer: Synergy H4 spectrophotometer - Wavelength: 570 nm- Filter: No data- Filter bandwidth: No data- Linear OD range of spectrophotometer: No dataNUMBER OF REPLICATE TISSUES: 3CALCULATIONS and STATISTICAL METHODSAll data were background subtracted before analysis. MTT data are presented as % viable compared to negative control. Data were generated as follows: MTT AssayBlanks:· The optical density (OD) mean from all replicates for each plate (ODblank). Negative Controls (NC):Identity: Phosphate-Buffered Saline (PBS), Lot No. AC10239794Provided by:MatTekDate Received:12 Dec 2017 and 19 Dec 2017Expiration Date:18 Jul 2018Storage:Room temperature and humidityDescription:Clear colorless liquidSample Preparation:Used as receivedPositive Control (PC):Identity: 5% Sodium Dodecyl Sulfate (SDS), Lot No. 071817MABProvided by:MatTekDate Received:12 Dec 2017 and 19 Dec 2017Expiration Date:18 Jul 2018Storage:Room temperature and humidityDescription:Clear colorless liquidSample Preparation:Used as received- Assay quality controls- Negative Controls (NC)The Dulbecco’s phosphate buffered saline (DPBS) was used as a NC. The assay passed all acceptance criteria if the ODs of the negative control exposed tissues were between ≥0.8 and ≤2.8. - Positive Controls (PC)5% solution of sodium dodecyl sulfate was used as a PC. The assay is meeting the acceptance criteria if the viability of the PC is ≤20% of the negative control. - Standard Deviation (SD)The standard deviation (SD) calculated from individual percent tissue viabilities of the test article exposed replicates was ≤18.
- Control samples:
- yes, concurrent negative control
- yes, concurrent positive control
- Amount/concentration applied:
- TEST MATERIAL- Amount(s) applied (volume or weight with unit): 25 mg - Concentration (if solution): neat (undiluted)VEHICLE (Not used)- Amount(s) applied (volume or weight with unit): none- Concentration (if solution): none- Lot/batch no. (if required): none- Purity: noneNEGATIVE CONTROL- Amount(s) applied (volume or weight): 30 µL- Concentration (if solution): neatPOSITIVE CONTROL- Amount(s) applied (volume or weight): 30 µL- Concentration (if solution): 5% solution of sodium dodecyl sulfate
- Duration of treatment / exposure:
- Tissues will be topically exposed to the test article and control articles for 60 minutes.
- Duration of post-treatment incubation (if applicable):
- After dosing, the tissues will be returned to the incubator for 35 ±1 minute, and then returned to the sterile hood for the remainder of the 60-minute exposure period.
- Number of replicates:
- All treatments with test articles and controls will be dosed in triplicate EpiDerm™ tissues.
Results and discussion
In vitro
Results
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- Run 1
- Value:
- 81
- Vehicle controls validity:
- not specified
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- no indication of irritation
- Other effects / acceptance of results:
- All treatments with test articles and controls will be dosed in triplicate EpiDerm™ tissues.In vitro result In vivo ClassificationMean tissue viability ≤ 50% Category 2Mean tissue viability > 50% Non-irritant
Applicant's summary and conclusion
- Interpretation of results:
- other: not irritating
- Conclusions:
- The dermal irritation potential of test article was determined according to the OECD 439 test guideline followed for this study. The Mean % tissue viability compared to negative control (n=3) of the 4',5'-dibromo-3',6'-dihydroxyspiro[isobenzofuran-1(3H),9'-[9H]xanthene]-3-one, CAS No. 596-03-2 was determined to be 81.0%. Thus, 4',5'-dibromo-3 ',6'-dihydroxyspiro[isobenzofuran-1(3H),9'-[9H]xanthene]-3-one was considered to be not irritating to the human skin.
- Executive summary:
The dermal irritation potential of test article was determined according to the OECD 439 In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method”. The MatTek EpiDerm™ model was used to assess the potential dermal irritation of the test article by determining the viability of the tissues following exposure to the test article via MTT. The objective of this study was to assess the dermal irritation potential of test article Tissues were exposed to test article and controls for ~one hour, followed by a 42 hour post-exposure recovery period. The viability of each tissue was determined by MTT assay.
The MTT data shows that the assay quality controls were met, as the OD of the negative control tissues was between 1.195 and 1.430. Also, the positive control, 5% sodium dodecyl sulfate (SDS), reduced tissue viability to 4.5% of negative control.
The Mean % tissue viability compared to negative control (n=3) of the 4',5'-dibromo-3',6'-dihydroxyspiro[isobenzofuran-1(3H),9'-[9H]xanthene]-3-one, CAS No. 596-03-2 was determined to be 81.0%.
Hence, under the experimental test conditions it was concluded that 4',5'-dibromo-3',6'-dihydroxyspiro[isobenzofuran-1(3H),9'-[9H]xanthene]-3-one, CAS No. 596-03-2 was considered to be not irritating to the human skin and being classified as “Not Classified'' as per CLP Regulation.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.