Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

INHALATION : Remove to fresh air. If victim is not breathing, give artificial respiration.
If breathing is difficult, give oxygen.
SKIN CONTACT : Immediately flush skin with copious amounts of water.
EYES CONTACT : Immediately flush eyes with copious amounts of water at least 15 minutes.
INGESTION : Wash out mouth with water.
If victim is conscious, call a physician immediately.

Fire-fighting measures

EXTINGUISHING MEASURES : Dry chemical powder. Carbon dioxide water spray.
PROTECTIVE EQUIPMENT : Wear self-contained breathing apparatus, rubber boots and heavy rubber gloves.
Wear full protective equipment.
Be sure to earth the installations.

Accidental release measures

PERSONAL PRECAUTIONS : Wear protective clothing and equipment consistent with the degree of hazard
ENVIRONMENTAL PRECAUTIONS : For large spills, take precautions to prevent entry into waterways, sewers, or surface drainage systems.
CLEAN-UP METHODS : Collect and place it in a suitable, properly labelled container for recovery or disposal.

Handling and storage

HANDLING : Do not get in eyes, or skin or on clothing.
Avoid dust cloud.
Mechanical exhaust required.
Wash thoroughly after handling.
STORAGE : Keep in a cool place.
Keep tightly closed.

Transport information

Land transport (UN RTDG/ADR/RID)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not classified

Inland waterway transport (UN RTDG/ADN(R))

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not classified

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not classified

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not classified
SpecialProvisionsopen allclose all

Exposure controls / personal protection

HAND PROTECTION : Impervious nitrile, rubber and latex gloves are recommended. If material is handled in solution, the solvents should also be considered when selecting protective clothing material.
EYE PROTECTION : Safety glasses with side-shield are recommended. Face shields or chemical safety goggles may be required if splach potential exists or if corrosive materials are present.
SKIN & BODY PROTECTION : Wear a laboratory coat when handling quantities up to 2 kg. For quantities over 2 kg, wear laboratory coat or coverall of low permeability. For manufacturing operations, wear coverall of low permeability.
HYGIENE : Wash hands and face before breaks and immediately after handling the product

Stability and reactivity

STABILITY : Stable under normal conditions of use. (see §7)

CONDITIONS TO AVOID : Keep closed in ventilated area.
Avoid dust cloud.

Disposal considerations

PRECAUTIONS : Wear protective clothing, gloves and goggles.
WASTE AND PRODUCT DISPOSAL : Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an after-burner and scrubber.
CONTAMINATED PACKAGING MATERIAL : Incineration.