Registration Dossier

Administrative data

First-aid measures

- General advice:
Move out of dangerous area. Place and transport victim in stable position (lying sideways). Remove contaminated clothing immediately and dispose of safely.

- After inhalation:
Move to fresh air. Keep patient warm and at rest. Call a physician or poison control center immediately.

- After skin contact:
Wash off thoroughly with plenty of soap and water, if available with polyethyleneglycol 400, subsequently rinse with water. Call a physician or poison control center immediately.

- After eye contact:
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a physician or poison control center immediately.

- After swallowing:
Rinse mouth. Do NOT induce vomiting. Call a physician or poison control center immediately.

Fire-fighting measures

- Suitable extinguishing agents:
Water spray, Carbon dioxide (CO2), Foam, Sand

- Special hazards caused by the material, its products of combustion or resulting gases:
In the event of fire the following may be released: Hydrogen cyanide (hydrocyanic acid), Carbon monoxide (CO), nitrogen oxides (NOx),

- Protective equipment:
In the event of fire and/or explosion do not breathe fumes. In the event of fire, wear self-contained breathing apparatus.

- Additional information:
Contain the spread of the fire-fighting media. Do not allow run-off from fire fighting to enter drains or water courses.

Accidental release measures

- Person-related safety precautions:
Avoid contact with spilled product or contaminated surfaces. Use personal protective equipment.

- Measures for environmental protection:
Do not allow to get into surface water, drains and ground water.

- Measures for cleaning/collecting:
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Clean contaminated floors and objects thoroughly, observing environmental regulations. Keep in suitable, closed containers for disposal.

Handling and storage

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each manufacturing site.

Personal precautions while handling the product:

- respiratory protection:
If product is handled while not enclosed, and if contact may occur:
Wear respirator with an organic vapours and gas filter mask (protection factor 10) conforming to EN140 type A or equivalent.

- hand/skin/body protection:
Wear CE Marked (or equivalent) nitrile rubber gloves (minimum thickness 0,40 mm). Wash when contaminated.
Dispose of when contaminated inside, when perforated or when contamination outside cannot be removed.
Wash hands always before eating, drinking, smoking or using the toilet.

Wear standard coverall and type 3 suit.
Wear two layers of clothing wherever possible.
Polyester/cotton or cotton overalls should be worn under chemical protection suit and should be professionally laundered frequently.
If chemical protection suit is splashed, sprayed or significantly contaminated, decontaminate as far as possible, then carefully
remove and dispose of as advised by manufacturer.

If product is handled while not enclosed, and if contact may occur:
Complete suit protecting against chemicals

- eye protection:
Wear goggles conforming to EN166 (Field of Use 5) and faceshield conforming to EN166 (Field of Use 3).

- Hygene measures:
Avoid contact with skin, eyes and clothing.
Keep working clothes separately.
Wash hands immediately after work, if necessary take a shower.
Remove soiled clothing immediately and clean thoroughly before using again.
Garments that cannot be cleaned must be destroyed (burnt).



Transport information

Land transport (ADR/RID)

UN number:
2735
Proper shipping name and description:
AMINES, LIQUID, CORROSIVE, N.O.S.
( AMINOINDAN)
Chemical name:
(1R,2S)-2,6-Dimethyl-2,3-dihydro-1H-inden-1amine
Language:
English
Class:
8
Classification code:
C7
Packaging group:
III
Labels:
8
Remarks:
Hazard no.: 80
Tunnel Code: E

Inland waterway transport (ADN(R))

UN number:
2735
Proper shipping name and description:
AMINES, LIQUID, CORROSIVE, N.O.S.
( AMINOINDAN)
Chemical name:
(1R,2S)-2,6-Dimethyl-2,3-dihydro-1H-inden-1amine
Language:
English
Class:
8
Classification code:
C7
Packaging group:
III
Labels:
8
Remarksopen allclose all

Marine transport (IMDG)

UN number:
2735
Proper shipping name and description:
AMINES, LIQUID, CORROSIVE, N.O.S.
( AMINOINDAN)
Chemical name:
(1R,2S)-2,6-Dimethyl-2,3-dihydro-1H-inden-1amine
Class:
8
Packaging group:
III
EmS code:
F-A, S-B
Labels:
8
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
2735
Proper shipping name and description:
AMINES, LIQUID, CORROSIVE, N.O.S.
( AMINOINDAN)
Chemical name:
(1R,2S)-2,6-Dimethyl-2,3-dihydro-1H-inden-1amine
Class:
8
Packaging group:
III
Labels:
8
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

- Advice on safe handling:
Use only in area provided with appropriate exhaust ventilation.

Stability and reactivity

- Stability:
No hazardous reactions when stored and handled according to prescribed instructions.

- Materials to avoid:
Acids, Strong oxidizing agents

Disposal considerations

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each manufacturing site.

Waste air is being burnt, solvents are recycled or burnt.
Aqueous waste is treated at the sites WWTP.