Registration Dossier

Administrative data

First-aid measures

4.1. Description of first aid measures.EYES: Remove contact lenses, if present. Wash immediately with plenty of water for at least 15 minutes, opening the eyelids fully. If problempersists, seek medical advice.SKIN: Remove contaminated clothing. Rinse skin with a shower immediately. Get medical advice/attention immediately. Wash contaminatedclothing before using it again.INHALATION: Remove to open air. If the subject stops breathing, administer artificial respiration. Get medical advice/attention immediately.INGESTION: Get medical advice/attention immediately. Do not induce vomiting. Do not administer anything not explicitly authorised by adoctor.4.2. Most important symptoms and effects, both acute and delayed.For symptoms and effects caused by the contained substances, see chap. 11.4.3. Indication of any immediate medical attention and special treatment needed.Information not available.

Fire-fighting measures

5.1. Extinguishing media.SUITABLE EXTINGUISHING EQUIPMENTThe extinguishing equipment should be of the conventional kind: carbon dioxide, foam, powder and water spray.UNSUITABLE EXTINGUISHING EQUIPMENTNone in particular.5.2. Special hazards arising from the substance or mixture.HAZARDS CAUSED BY EXPOSURE IN THE EVENT OF FIREDo not breathe combustion products.5.3. Advice for firefighters.GENERAL INFORMATIONUse jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health.Always wear full fire prevention gear. Collect extinguishing water to prevent it from draining into the sewer system. Dispose of contaminatedwater used for extinction and the remains of the fire according to applicable regulations.SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERSNormal fire fighting clothing i.e. fire kit (BS EN 469), gloves (BS EN 659) and boots (HO specification A29 and A30) in combination withself-contained open circuit positive pressure compressed air breathing apparatus (BS EN 137).

Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures.If there are no contraindications, spray powder with water to prevent the formation of dust. Avoid breathing vapours/mists/gases.Wear suitable protective equipment (including personal protective equipment referred to under Section 8 of the safety data sheet) to preventany contamination of skin, eyes and personal clothing. These indications apply for both processing staff and those involved in emergencyprocedures.6.2. Environmental precautions.The product must not penetrate into the sewer system or come into contact with surface water or ground water.6.3. Methods and material for containment and cleaning up.Use spark-proof mechanical equipment to collect the leaked product and place it in containers for recovery or disposal. If there are nocontraindications, use jets of water to eliminate product residues.Make sure the leakage site is well aired. Check incompatibility for container material in section 7. Contaminated material should be disposedof in compliance with the provisions set forth in point 13.6.4. Reference to other sections.Any information on personal protection and disposal is given in sections 8 and 13.

Handling and storage

7.1. Precautions for safe handling.Before handling the product, consult all the other sections of this material safety data sheet. Avoid leakage of the product into theenvironment. Do not eat, drink or smoke during use. Remove any contaminated clothes and personal protective equipment before enteringplaces in which people eat.7.2. Conditions for safe storage, including any incompatibilities.Store only in the original container. Store the containers sealed, in a well ventilated place, away from direct sunlight. Keep containers awayfrom any incompatible materials, see section 10 for details.7.3. Specific end use(s).Information not available.

Transport information

Land transport (ADR/RID)

UN number:
2811
Proper shipping name and description:
TOXIC SOLID, ORGANIC, N.O.S.
Chemical name:
1-(2-chlorophenyl)-3-(dimethylamino)-1-phenylpropan-1-ol
Language:
English
Class:
6.1
Classification code:
T2
Packaging group:
III
Labels:
6.1
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
2811
Shippingopen allclose all
Class:
6.1
Classification code:
T2
Packaging group:
III
Labels:
6.1
Remarksopen allclose all

Marine transport (IMDG)

UN number:
2811
Proper shipping name and description:
TOXIC SOLID, ORGANIC, N.O.S.
Chemical name:
1-(2-chlorophenyl)-3-(dimethylamino)-1-phenylpropan-1-ol
Class:
6.1
Packaging group:
III
EmS number:
F-A, S-A
Labels:
6.1
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
2811
Proper shipping name and description:
TOXIC SOLID, ORGANIC, N.O.S.
Chemical name:
1-(2-chlorophenyl)-3-(dimethylamino)-1-phenylpropan-1-ol
Class:
6.1
Packaging group:
III
Labels:
6.1
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

On-site isolated intermediate used under SCC.8.1. Control parameters.Information not available.8.2. Exposure controls.As the use of adequate technical equipment must always take priority over personal protective equipment, make sure that the workplace iswell aired through effective local aspiration. Personal protective equipment must be CE marked, showing that it complies with applicablestandards.HAND PROTECTIONIn the case of prolonged contact with the product, protect the hands with penetration-resistant work gloves (see standard EN 374).Work glove material must be chosen according to the use process and the products that may form. Latex gloves may cause sensitivityreactions.SKIN PROTECTIONWear category I professional long-sleeved overalls and safety footwear (see Directive 89/686/EEC and standard EN ISO 20344). Wash bodywith soap and water after removing protective clothing.EYE PROTECTIONWear airtight protective goggles (see standard EN 166).In the presence of risks of exposure to splashes or squirts during work, adequate mouth, nose and eye protection should be used to preventaccidental absorption.RESPIRATORY PROTECTIONNone required, unless indicated otherwise in the chemical risk assessment.ENVIRONMENTAL EXPOSURE CONTROLS.The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensurecompliance with environmental standards.

Stability and reactivity

10.1. Reactivity.There are no particular risks of reaction with other substances in normal conditions of use.10.2. Chemical stability.The product is stable in normal conditions of use and storage.10.3. Possibility of hazardous reactions.No hazardous reactions are foreseeable in normal conditions of use and storage.10.4. Conditions to avoid.None in particular. However the usual precautions used for chemical products should be respected.10.5. Incompatible materials.Information not available.10.6. Hazardous decomposition products.Information not available.

Disposal considerations

13.1. Waste treatment methods.Reuse, when possible. Product residues should be considered special hazardous waste. The hazard level of waste containing this productshould be evaluated according to applicable regulations.Disposal must be performed through an authorised waste management firm, in compliance with national and local regulations.Waste transportation may be subject to ADR restrictions.CONTAMINATED PACKAGINGContaminated packaging must be recovered or disposed of in compliance with national waste management regulations.