Registration Dossier

Diss Factsheets

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
flammable solids
Type of information:
experimental study
Adequacy of study:
key study
Study period:
22/10/2015
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
EU Method A.10 (Flammability (Solids))
Deviations:
no
GLP compliance:
no
Specific details on test material used for the study:
SOURCE OF TEST MATERIAL
- Source and lot/batch number of test material: MC-9
Key result
Test procedure:
burning rate test: preliminary screening test
Remarks on result:
substance does not ignite and propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period
Interpretation of results:
GHS criteria not met
Conclusions:
FAT 40034/F should be considered as not highly flammable.
Executive summary:

The flammability of FAT 40034/F was evaluated in a study conducted according to EU Method A.10. In pre-safety study, A small amount of the test item was heated on a magnesia groove with a gas burner in order to derive safety precautions. The pile was arranged at right angle to the draught in the fume cupboard. The flame of the gas burner was used to ignite the pile at one end. In a screening test, a stop watch was held ready. Since ignition did not occur within two minutes, the test item was classified as not highly flammable and no determination of burning rate was necessary. Determination of burning rate was not carried out as the test item showed no ignition. In a safety pre-test, a small amount of the test item was heated on a magnesia groove with a gas burner. Glowing was observed. The test item showed no signs of ignition. While in preliminary screening test, the test item was heated with the flame of a teclu burner. Glowing was observed during heating. No ignition occurred within two minutes. The substance did not ignite or propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period. Hence, the test item FAT 40034/F should be considered as not highly flammable.

Description of key information

The flammability of the test substance was evaluated in a study conducted according to EU Method A.10. The substance did not ignite or propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period. Hence, the test item FAT 40034/F should be considered as not highly flammable.

Key value for chemical safety assessment

Flammability:
non flammable

Additional information

Justification for classification or non-classification

As the Reactive Red 24:1 is considered to be not highly flammable, hence it does not warrant classification according to the EU Classification, Labelling and Packaging of Substances and Mixtures (CLP) Regulation (EC) No. 1272/2008.

Categories Display