Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Toxicological information

Skin irritation / corrosion

Currently viewing:

Administrative data

Endpoint:
skin irritation: in vitro / ex vivo
Type of information:
experimental study
Adequacy of study:
key study
Study period:
December 04, 2017 to March 13, 2018
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Justification for type of information:
Data is from experimental study report

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
2018
Report date:
2018

Materials and methods

Test guideline
Qualifier:
according to guideline
Guideline:
OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
Principles of method if other than guideline:
The purpose of this study is to provide classification of dermal irritation potential of a chemical by using a three-dimensional human epidermis model, according to the OECD Test Guideline No. 439, “In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method”. The EpiDerm™ SIT allows discrimination between irritants of Category 2 and non-irritants, according to the UN Globally Harmonized System of Classification and Labeling of Chemicals (GHS).
GLP compliance:
yes

Test material

Constituent 1
Chemical structure
Reference substance name:
3-phenylpropionyl chloride
EC Number:
211-443-6
EC Name:
3-phenylpropionyl chloride
Cas Number:
645-45-4
Molecular formula:
C9H9ClO
IUPAC Name:
3-phenylpropanoyl chloride
Test material form:
liquid
Details on test material:
- Name of test material (as cited in study report): 3-phenylpropionyl chloride- Molecular formula : C9H9ClO- Molecular weight : 168.622 g/mol- Substance type: Organic- Physical state: liquid
Specific details on test material used for the study:
- Name of test material (as cited in study report): 3-phenylpropionyl chloride- Molecular formula : C9H9ClO- Molecular weight : 168.622 g/mol- Substance type: Organic- Physical state: liquidSTABILITY AND STORAGE CONDITIONS OF TEST MATERIAL- Storage condition of test material: Room temperature or Fridge storage- Stability under test conditions: No data available- Solubility and stability of the test substance in the solvent/vehicle: No data available- Reactivity of the test substance with the solvent/vehicle of the cell culture medium: No data availableTREATMENT OF TEST MATERIAL PRIOR TO TESTING- Treatment of test material prior to testing: Test articles is tested as provided (neat).- Preliminary purification step (if any): No data available- Final dilution of a dissolved solid, stock liquid or gel: No data available- Final preparation of a solid: No data availableFORM AS APPLIED IN THE TEST: LiquidOTHER SPECIFICS: No data available

In vitro test system

Test system:
other: MatTek EpiDerm™ Tissue Model (EPI-200-SIT) kit
Source species:
other: no data
Cell type:
non-transformed keratinocytes
Cell source:
other: EpiDerm™ 3-dimensional human tissues used in this study
Source strain:
other: Not applicable
Details on animal used as source of test system:
EpiDerm™ tissues, Lot No. 27646 Kits I and J, were received from MatTek on 12 Dec 2017, and Lot No. 27654 Kits O and P, were received from MatTek on 19 Dec 2017. See Appendix C for EpiDerm™ tissue Quality Control report. All tissues were refrigerated at 2-8°C upon receipt. Before use, the tissues were incubated (37±1°C, 5±1% CO2) with assay medium (MatTek) for a one-hour equilibration. The tissues were then moved to new wells with fresh medium for an additional overnight equilibrium, for 18±3 hours. Equilibration medium was replaced with fresh medium before dosing.
Justification for test system used:
The EpiDerm™ Skin Model closely parallels human skin, thus providing a useful in vitro means to assess dermal irritancy and toxicology
Vehicle:
unchanged (no vehicle)
Details on test system:
EpiDerm™ Tissue SamplesEpiDerm™ tissues, Lot No. 27646 Kits I and J, were received from MatTek on 12 Dec 2017, and Lot No. 27654 Kits O and P, were received from MatTek on 19 Dec 2017. See Appendix C for EpiDerm™ tissue Quality Control report. All tissues were refrigerated at 2-8°C upon receipt. Before use, the tissues were incubated (37±1°C, 5±1% CO2) with assay medium (MatTek) for a one-hour equilibration. The tissues were then moved to new wells with fresh medium for an additional overnight equilibrium, for 18±3 hours. Equilibration medium was replaced with fresh medium before dosing.Mesh CompatibilityFive of the test articles supplied were liquids. These test articles were assessed for compatibility withpre-cut nylon mesh supplied with the tissues. The mesh was placed on a slide and 30 μl of a liquid test articles or PBS (negative control) were applied. After 60 minutes of exposure, the mesh was checked microscopically. If no damage or other interaction was observed, indicating that the mesh was compatible with the test article, the mesh was used as a spreading aid.Tissue Viability (MTT Reduction)At the end of the incubation period, each EpiDerm™ tissue was rinsed with PBS and transferred to a 24-well plate containing 300 μl of MTT solution (1 mg/ml MTT in DMEM). The tissues were then returned to the incubator for a three-hour MTT incubation period. Following the MTT incubation period, each EpiDerm™ tissue was rinsed with PBS and then treated with 2.0 ml of extractant solution (isopropanol) per well for at least two hours, with shaking, at room temperature. Two aliquots of the extracted MTT formazan were measured at 540 nm using a plate reader (μQuant Plate Reader, Bio-Tek Instruments, Winooski, VT).For several tissues, the test article had stained the tissues. Therefore, the tissues were extracted with only 1.0 ml, allowing extraction to occur only through the bottom of the insert. After the extraction period, the tissue insert was removed and discarded and 1.0 ml of extraction solution were added to each well, bringing the volume to a total of 2.0 ml.Quality ControlsThe assay meets the acceptance criteria if the mean OD540 of the negative control tissues is between 1.0 and 2.5, inclusive, and the mean viability of positive control tissues, expressed as percentage of the negative control tissues, is at least 20%. In addition, the standard deviation (SD) calculated from individual percent tissue viabilities of the three identically-treated replicates must be less than 18%.Note: Chemicals that provide tissue viabilities in a range of 30% to 70% may provide high SD. If the high SD (above acceptance limits) is typical for the chemical and the classification of the chemical is consistent in all independent runs, MatTek recommends that this result be accepted, although it did not meet the Assay Acceptance Criterion.Analysis of DataSee Table 1 for Experimental Data. The mean absorbance value for each time point was calculated from the optical density (OD) of the duplicate samples and expressed as percent viability for each sample using the following formula:% viability = 100 X (OD sample/OD negative control)Skin Irritation PredictionAccording to the EU1,2 and GHS3 classification (R38 / Category 2 or no label), an irritant is predicted if the mean relative tissue viability of three individual tissues exposed to the test substance is 50% or less of the mean viability of the negative controls.In vitro result In vivo ClassificationMean tissue viability ≤ 50% Category 2Mean tissue viability > 50% Non-irritant (NI)Assessment of direct MTT reduction and assessment of coloring or staining materials was not performed. Therefore, it cannot be fully assessed if the test articles interfered with MTT viability measurements.Retention of DataUpon signing the final report, all raw data, supporting documentation and reports are submitted to the Archivist by the Study Director. The raw data are filed at MB Research by project number. The final report is filed at MB Research by Sponsor name and MB project number.All data generated during the conduct of this study will be archived at MB Research for at least one year from the date of the final report and optionally longer at additional cost. The Sponsor will be contacted in writing to determine final disposition of the records.Any remaining test article will be discarded upon submission of the report.Amendment to the ProtocolThere were no amendments to the protocol. See Appendix C for the protocol in its entiretyEvaluation of Test Article in the Cell Models:1. Cell system: Upon receipt, the MatTek EpiDerm™ tissue cultures were placed in 0.9 mL of fresh Maintenance medium (in a 6-well plate). The culture inserts are incubated for ~one hour. The tissues were then transferred to 6-well plates containing 0.9 mL fresh Maintenance medium and they were incubated overnight at ~37°C, 5% CO2 in a humidified incubator.2. Control and Test Article Exposures: On the day of dosing, the tissues are then removed from the incubator and the controls and the test article are applied topically to tissues by pipette. Tissues were exposed to controls and the test articles for one hour, with ~35 minutes in a 37°C, 5% CO2 humidified incubator and the remaining 25 minutes at room temperature.a) Controls30 µL of negative control DPBS, positive control 5% SDS was applied topically to the tissue and gently spread by placing a nylon mesh on the apical surface of each tissue, if necessary.b)Test ArticleFor solid test article, the tissues were moistened with 25 μL of ultrapure water to improve contact of the tissue surface with the test article. Approximately 25 mg of each test article was evenly applied to the apical surface of each tissue (n=3). All the tissues were placed into the ~37°C incubator with 5% CO2. The exposure times were approximately 1 hour, with ~35 minutes exposure in the incubator and ~25 minutes at room temperature. 3.Post-exposure treatmentAfter the 1 hour exposure, the tissues were rinsed 20 to 25 times with 1 mL of DPBS. The apical surface was gently blotted with a cotton swab. The tissues were placed in 0.9 mL of fresh Maintenance medium (6-well plate) for either 25 hours, 38 minutes and 23 seconds or for 24 hours, 10 minutes and 09 seconds (as there were numerous tissues, they had to be broken down into 2 sets to complete dosing in a timely manner). After this initial ~24 hour incubation, the tissues were placed in 6-well plates containing 0.9 mL fresh Maintenance medium and incubated for another 17 hours, 03 minutes and 34 seconds prior to performing the MTT assay, for a total of an approximately 42 hour post-exposure incubation.RECONSTRUCTED HUMAN EPIDERMIS (RHE) TISSUE- Model used: The EpiDerm™ 3 dimensional human tissue model- Tissue Lot number(s): 26459- Date of initiation of testing: 6/08/2017TEMPERATURE USED FOR TEST SYSTEM- Temperature used during treatment / exposure: 37°C- Temperature of post-treatment incubation (if applicable): 37°CREMOVAL OF TEST MATERIAL AND CONTROLS-Volume and number of washing steps: TwiceMTT DYE USED TO MEASURE TISSUE VIABILITY AFTER TREATMENT / EXPOSURE- MTT concentration: 300 µL MTT medium (1.0 mg/mL).- Incubation time: After 2 hours, 57 minute and 25 second MTT incubation- Spectrophotometer: Synergy H4 spectrophotometer - Wavelength: 570 nm- Filter: No data- Filter bandwidth: No data- Linear OD range of spectrophotometer: No dataNUMBER OF REPLICATE TISSUES: 3CALCULATIONS and STATISTICAL METHODSAll data were background subtracted before analysis. MTT data are presented as % viable compared to negative control. Data were generated as follows: MTT AssayBlanks:·        The optical density (OD) mean from all replicates for each plate (ODblank). Negative Controls (NC):Identity: Phosphate-Buffered Saline (PBS), Lot No. AC10239794Provided by:MatTekDate Received:12 Dec 2017 and 19 Dec 2017Expiration Date:18 Jul 2018Storage:Room temperature and humidityDescription:Clear colorless liquidSample Preparation:Used as receivedPositive Control (PC):Identity: 5% Sodium Dodecyl Sulfate (SDS), Lot No. 071817MABProvided by:MatTekDate Received:12 Dec 2017 and 19 Dec 2017Expiration Date:18 Jul 2018Storage:Room temperature and humidityDescription:Clear colorless liquidSample Preparation:Used as received- Assay quality controls- Negative Controls (NC)The Dulbecco’s phosphate buffered saline (DPBS) was used as a NC. The assay passed all acceptance criteria if the ODs of the negative control exposed tissues were between ≥0.8 and ≤2.8.  - Positive Controls (PC)5% solution of sodium dodecyl sulfate was used as a PC. The assay is meeting the acceptance criteria if the viability of the PC is ≤20% of the negative control.   - Standard Deviation (SD)The standard deviation (SD) calculated from individual percent tissue viabilities of the test article exposed replicates was ≤18.
Control samples:
yes, concurrent negative control
yes, concurrent positive control
Amount/concentration applied:
TEST MATERIAL- Amount(s) applied (volume or weight with unit): 30 μl- Concentration (if solution): neat (undiluted)VEHICLE (Not used)- Amount(s) applied (volume or weight with unit): none- Concentration (if solution): none- Lot/batch no. (if required): none- Purity: noneNEGATIVE CONTROL- Amount(s) applied (volume or weight): 30 µL- Concentration (if solution): neatPOSITIVE CONTROL- Amount(s) applied (volume or weight): 30 µL- Concentration (if solution): 5% solution of sodium dodecyl sulfate
Duration of treatment / exposure:
Tissues will be topically exposed to the test article and control articles for 60 minutes.
Duration of post-treatment incubation (if applicable):
After dosing, the tissues will be returned to the incubator for 35 ±1 minute, and then returned to the sterile hood for the remainder of the 60-minute exposure period.
Number of replicates:
All treatments with test articles and controls will be dosed in triplicate EpiDerm™ tissues.

Test system

Duration of treatment / exposure:
The duration of the EpiDerm™ Skin Irritation Test (SIT) is approximately five days

Results and discussion

In vitro

Results
Irritation / corrosion parameter:
% tissue viability
Run / experiment:
Run 1
Value:
20.9
Vehicle controls validity:
not specified
Negative controls validity:
valid
Positive controls validity:
valid
Remarks on result:
positive indication of irritation
Other effects / acceptance of results:
All treatments with test articles and controls will be dosed in triplicate EpiDerm™ tissues.In vitro result In vivo ClassificationMean tissue viability ≤ 50% Category 2Mean tissue viability > 50% Non-irritant

Any other information on results incl. tables

Test and Control Article Identity

 

Tissue Viability

Irritancy Classification

Mean

3-phenylpropionyl chloride, CAS No. 645-45-4

20.9

Irritant

Applicant's summary and conclusion

Interpretation of results:
other: irritating
Conclusions:
The dermal irritation potential of test article was determined according to the OECD 439 test guideline followed for this study. The Mean % tissue viability compared to negative control (n=3) of 3-phenylpropionyl chloride[CAS: 645-45-4] was determined to be 20.9%. Thus, 3-phenylpropionyl chloride[CAS: 645-45-4] was considered to be Irritating to the human skin.
Executive summary:

The dermal irritation potential of test article was determined according to the OECD 439 In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method”. The MatTek EpiDerm™ model was used to assess the potential dermal irritation of the test article by determining the viability of the tissues following exposure to the test article via MTT. The objective of this study was to assess the dermal irritation potential of test article Tissues were exposed to test article and controls for ~one hour, followed by a 42 hour post-exposure recovery period. The viability of each tissue was determined by MTT assay. 

The MTT data shows that the assay quality controls were met. The mean tissue viabilities for the Positive control, Methyl acetate were 6.5%, 10.7% respectively in the first and second run, whereas the tissue viabilities of the negative control, Tissue culture water remained at 100% in the both the runs.

The Mean % tissue viability compared to negative control (n=3) of 3-phenylpropionyl chloride[CAS: 645-45 -4] was determined to be 20.9%.

Hence, under the experimental test conditions it was concluded that 3-phenylpropionyl chloride[CAS: 645-45-4 ]was considered to be irritating to the human skin and being classified as ''Irritating to skin in Category 2” as per CLP Regulation.