Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures
- Inhalation: Fresh air, consult doctor.
- Skin contact: Immediately rinse with copious amounts of running water (for 10 minutes). Remove contaminated clothes.
Put on a bandage with sterile gauze, seek medical attention in hospital.
- Eye contact: Immediately flush eyes with soft jet of water or eye rinse solution for at least 15 minutes. Hold eyelid wide-open. Seek a doctor/hospital, eye flushing should continue during transportation to a doctor.
- Ingestion: Rinse out mouth, drink 1-2 glasses of water, do not induce vomiting. Immediate medical treatment necessary.
Most important symptoms and effects, both acute and delayed: Causes burns.
Indication of any immediate medical attention and special treatment needed: See section Description of first aid measures
- Inhalation: Fresh air, consult doctor.
- Skin contact: Immediately rinse with copious amounts of running water (for 10 minutes). Remove contaminated clothes.
Put on a bandage with sterile gauze, seek medical attention in hospital.
- Eye contact: Immediately flush eyes with soft jet of water or eye rinse solution for at least 15 minutes. Hold eyelid wide-open. Seek a doctor/hospital, eye flushing should continue during transportation to a doctor.
- Ingestion: Rinse out mouth, drink 1-2 glasses of water, do not induce vomiting. Immediate medical treatment necessary.
Most important symptoms and effects, both acute and delayed: Causes burns.
Indication of any immediate medical attention and special treatment needed: See section Description of first aid measures
Fire-fighting measures
Extinguishing media:
- Suitable extinguishing media: All common extinguishing agents are suitable.
- Extinguishing media which must not be used for safety reasons: None known
- Special hazards arising from the substance or mixture: Formation of toxic gases is possible during heating or in fires.
- Advice for firefighters: Put on breathing apparatus. Wear protective equipment.
- Additional information: In case of fire, keep containers cool with water spray.
- Suitable extinguishing media: All common extinguishing agents are suitable.
- Extinguishing media which must not be used for safety reasons: None known
- Special hazards arising from the substance or mixture: Formation of toxic gases is possible during heating or in fires.
- Advice for firefighters: Put on breathing apparatus. Wear protective equipment.
- Additional information: In case of fire, keep containers cool with water spray.
Accidental release measures
- Personal precautions, protective equipment and emergency procedures: Avoid contact with skin and eyes.
- Environmental precautions: Do not empty into drains / surface water / ground water.
- Methods and material for containment and cleaning up: Wash away residue with plenty of water: Remove with liquid-absorbing material (sand, peat, sawdust). Dispose of contaminated material as waste according to Section Disposal considerations.
- Environmental precautions: Do not empty into drains / surface water / ground water.
- Methods and material for containment and cleaning up: Wash away residue with plenty of water: Remove with liquid-absorbing material (sand, peat, sawdust). Dispose of contaminated material as waste according to Section Disposal considerations.
Handling and storage
Precautions for safe handling: Open and handle container with care. Avoid skin and eye contact. Ensure that workrooms are adequately ventilated.
When diluting/dissolving always slowly stir the product into water. Do not add product to hot water or hot solutions. Heating with vigorous, sudden delayed boiling is possible! Scalding hazard! See advice in section Exposure controls/personal protection
Hygiene measures: Wash hands before work breaks and after finishing work. Do not eat, drink or smoke while working. Wash contaminated clothingbefore reuse. The workplace should be equipped with an emergency shower and eye-rinsing facility.
Conditions for safe storage, including any incompatibilities: Store in sealed original container. Store in a cool, well-ventilated place.
Keep only in original container.
Specific end use(s): Etching Agents for Metals
When diluting/dissolving always slowly stir the product into water. Do not add product to hot water or hot solutions. Heating with vigorous, sudden delayed boiling is possible! Scalding hazard! See advice in section Exposure controls/personal protection
Hygiene measures: Wash hands before work breaks and after finishing work. Do not eat, drink or smoke while working. Wash contaminated clothingbefore reuse. The workplace should be equipped with an emergency shower and eye-rinsing facility.
Conditions for safe storage, including any incompatibilities: Store in sealed original container. Store in a cool, well-ventilated place.
Keep only in original container.
Specific end use(s): Etching Agents for Metals
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Biological Exposure Indices: None
- Exposure controls:
Engineering controls: Avoid generation and inhalation of aerosols. Ensure good ventilation/suction at the workplace.
- Respiratory protection: In case of aerosol formation, we recommend wearing of appropriate respiratory protection equipment with ABEK P2 filter.
This recommendation should be matched to local conditions.
- Hand protection: Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended:
at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): Isobutylene-isoprene rubber
(IIR; >= 0.7 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes
permeation time as per EN 374): Isobutylene-isoprene rubber (IIR; >= 0.7 mm thickness) This information is based on literature references and on
information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of
chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.
- Eye protection: Goggles which can be tightly sealed.
- Skin protection: Protective clothing that covers arms and legs.
- Exposure controls:
Engineering controls: Avoid generation and inhalation of aerosols. Ensure good ventilation/suction at the workplace.
- Respiratory protection: In case of aerosol formation, we recommend wearing of appropriate respiratory protection equipment with ABEK P2 filter.
This recommendation should be matched to local conditions.
- Hand protection: Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended:
at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): Isobutylene-isoprene rubber
(IIR; >= 0.7 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes
permeation time as per EN 374): Isobutylene-isoprene rubber (IIR; >= 0.7 mm thickness) This information is based on literature references and on
information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of
chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.
- Eye protection: Goggles which can be tightly sealed.
- Skin protection: Protective clothing that covers arms and legs.
Stability and reactivity
- Reactivity:
Reacts with acids: Heat released. Reacts with acids: release of poisonous gases possible.
- Chemical stability: Stable under recommended storage conditions.
- Possibility of hazardous reactions: See section reactivity
- Conditions to avoid: No decomposition if used according to specifications.
- Incompatible materials: See section reactivity
- Hazardous decomposition products: None if used for intended purpose. In case of fire toxic gases can be released.
Reacts with acids: Heat released. Reacts with acids: release of poisonous gases possible.
- Chemical stability: Stable under recommended storage conditions.
- Possibility of hazardous reactions: See section reactivity
- Conditions to avoid: No decomposition if used according to specifications.
- Incompatible materials: See section reactivity
- Hazardous decomposition products: None if used for intended purpose. In case of fire toxic gases can be released.
Disposal considerations
Waste treatment methods:
- Product disposal: In consultation with the responsible local authority, must be subjected to special treatment. Waste code 060205
The valid EWC waste code numbers are source-related. The manufacturer is therefore unable to specify EWC waste codes for the articles or products used in the various sectors. The EWC codes listed are intended as a recommendation for users.
- Product disposal: In consultation with the responsible local authority, must be subjected to special treatment. Waste code 060205
The valid EWC waste code numbers are source-related. The manufacturer is therefore unable to specify EWC waste codes for the articles or products used in the various sectors. The EWC codes listed are intended as a recommendation for users.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
