Registration Dossier

Administrative data

First-aid measures

Description of first aid measures:
Inhalation: Move to fresh air.
Eye contact: Rinse immediately with plenty of water.
Skin Contact: Destroy or thoroughly clean contaminated shoes. Immediately remove contaminated clothing and shoes and wash skin with soap and plenty of
water. If skin irritation or an allergic skin reaction develops, get medical attention.
Ingestion: Rinse mouth thoroughly.

Most important symptoms and effects, both acute and delayed:
See Toxicological information.

Indication of any immediate medical attention and special treatment needed
Hazards: No data available.
Treatment: Skin and/or eye contact. Flush thoroughly with water for at least 15minutes. Get medical assistance.

Fire-fighting measures

General Fire Hazards: No unusual fire or explosion hazards noted.

Extinguishing media:
Suitable extinguishing media:
Extinguish with foam, carbon dioxide, dry powder or water fog.
Unsuitable extinguishing media:
Do not use water jet as an extinguisher, as this will spread the fire.

Special hazards arising from the substance or mixture:
During fire, gases hazardous to health may be formed.

Advice for firefighters:
Special fire fighting procedures: No data available.
Special protective equipment for fire-fighters: Self-contained breathing apparatus and full protective clothing must be worn in case of fire.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
See Exposure Controls/Personal Protection below. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Keep unauthorized personnel away.

Environmental Precautions:
Avoid release to the environment. Prevent further leakage or spillage if safe to do so. Do not contaminate water sources or sewer. Environmental manager must be informed of all major spillages.

Methods and material for containment and cleaning up:
Stop the flow of material, if this is without risk. Absorb with sand or other inert absorbent.

Reference to other sections:
For personal protection see Exposure Controls/Personal Protection below. For waste disposal, see Disposal Considerations below.

Handling and storage

Precautions for safe handling:
Avoid contact with eyes, skin, and clothing. Wash hands thoroughly after handling.

Conditions for safe storage, including any incompatibilities:
Store away from incompatible materials.

Specific end use(s): Reserved for industrial and professional use.

Transport information

Land transport (ADR/RID)

UN number:
Not regulated
Proper shipping name and description:
Not regulated
Class:
Not regulated
Classification code:
Not regulated
Packaging group:
Not regulated
Labels:
Not regulated
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not regulated
Proper shipping name and description:
Not regulated
Class:
Not regulated
Classification code:
Not regulated
Packaging group:
Not regulated
Labels:
Not regulated
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not regulated
Proper shipping name and description:
Not regulated
Chemical name:
Not regulated
Class:
Not regulated
Packaging group:
Not regulated
EmS code:
Not regulated
Labels:
Not regulated
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not regulated
Proper shipping name and description:
Not regulated
Chemical name:
Not regulated
Class:
Not regulated
Packaging group:
Not regulated
Labels:
Not regulated
Remarksopen allclose all

Additional transport information

Additional transport information
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code: not applicable.

Exposure controls / personal protection

Control Parameters:
Occupational Exposure Limits: None of the components have assigned exposure limits.
Biological Limit Values: None.

Exposure controls:
Appropriate Engineering Controls: Provide adequate ventilation.
Individual protection measures, such as personal protective equipment:
1. General information: Use personal protective equipment as required. Personal protection equipment should be chosen according to the CEN standards and in discussion with the supplier of the personal protective equipment. Follow training instructions when handling this material.
2. Eye/face protection: Safety goggles. EN 166.
3. Skin protection:
3.1. Hand Protection: Protective gloves should be used if there is a risk of direct contact or splash.(EN374) Chemical resistant gloves required for prolonged or
repeated contact. Butyl rubber. Glove thickness: > 0.70 mm Break-through time: > 480 min Risk of splashes: Nitrile rubber. Nitrile gloves are recommended, but be aware that the liquid may penetrate the gloves. Frequent change is advisable. The most suitable glove must be chosen in consultation with the gloves supplier, who can inform about the breakthrough time of the glove material.
3.2. Other: Safety clothes : long sleeved clothing EN13688
4. Respiratory Protection: In case of inadequate ventilation use suitable respirator (EN14387). Seek advice from local supervisor.
5. Hygiene measures: Contaminated work clothing should not be allowed out of the workplace. Avoid contact with skin. Observe good industrial hygiene practices.
Environmental Controls: Do not empty into drains.

Stability and reactivity

Reactivity: No data available.
Chemical Stability: Material is stable under normal conditions.
Possibility of hazardous reactions: Material is stable under normal conditions.
Conditions to avoid: Avoid heat or contamination.
Incompatible Materials: No data available.
Hazardous Decomposition Products: By heating and fire, harmful vapors/gases may be formed.

Disposal considerations

Waste treatment methods
General information: Disposal considerations (including disposal of contaminated containers or packaging) Dispose of waste at an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Disposal methods: Wash before disposal. Dispose to controlled facilities.