Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 226-999-5 | CAS number: 5590-18-1
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Endpoint summary
Administrative data
Description of key information
Skin irritation
The dermal irritation potential of target chemical was assessedin various in- vitro and in-vivo experimental studies which were conducted for test chemical and its structurally similar read across substances.Based on the available key data and supporting studies,it can be concluded that the testchemical is unable to cause skin irritation and considered as not irritating. Comparing the above annotations with the criteria of CLP regulation, it can be classified under the category “Not Classified”.
Eye irritation
The ocular irritation potential of target chemical was assessedin various in- vitro and in-vivo experimental studies which were conducted for test chemical and its structurally similar read across substances.Based on the available key data and supporting studies,it can be concluded thatchemical is unable to cause eye irritation and considered as not irritating. Comparing the above annotations with the criteria of CLP regulation, it can be classified under the category “Not Classified”.
Key value for chemical safety assessment
Skin irritation / corrosion
Link to relevant study records
- Endpoint:
- skin irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Justification for type of information:
- Data is from experimental study report
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
- Principles of method if other than guideline:
- The purpose of this study was to assess potential for the test article to be dermal irritants. The dermal irritation potential of test article may be predicted by measurement of their cytotoxic effect, as reflected in the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, in the MatTek EpiDerm™ model.
- GLP compliance:
- no
- Test system:
- human skin model
- Source species:
- human
- Cell type:
- non-transformed keratinocytes
- Cell source:
- other: as provided by MatTek In Vitro Life Science Laboratories, Bratislava, Slovakia
- Source strain:
- other: Not applicable
- Details on animal used as source of test system:
- - Description of the cell system used:The normal human-derived keratinocytes were cultured at the air-liquid interface in a chemically defined medium on a permeable polycarbonate insert (surface 0.5 cm2). They were cultured in chemically defined serum free medium to form a multi-layered epithelium similar to that found in native epidermis. Each lot of tissues was Quality Assured by MatTek according to specific QC standards including: histology, tissue viability (MTT mean optical density), reproducibility (SD) and tissue thickness.Test System IdentificationAll of the EpiDerm™ 3-dimensional human tissues used in this study were identified by the date of arrival and the lot number. Certificate of Analysis for the tissues are included in this report. Tissue plates were appropriately labeled with study information.
- Justification for test system used:
- The 3-Dimensional Human Dermal Epithelial Model (EpiDerm™, MatTek, In Vitro Life Science Laboratories, Bratislava, Slovakia) is made up of normal human keratinocytes in serum free medium. The cells form an epithelial tissue that consists of organized basal, spinous, granular, and cornified layers analogous to those found in vivo. The EpiDerm™ model also contains epidermis-specific differentiation markers such as pro-filaggrin, the K1/K10 cytokeratin pair, involucrin, and type I epidermal transglutaminase, as well as keratohyalin granules, tonofilament bundles, desmosomes, and a multi-layered stratum corneum containing intercellular lamellar lipid layers arranged in patterns characteristic of in vivo epidermis. Each lot of tissues was Quality Assured by MatTek, Inc. according to specific QC standards including: histology (cell layers), tissue viability (MTT mean optical density) and reproducibility (SD). Tissue plates were appropriately labeled with study information. Bias was not a factor in this test system.
- Vehicle:
- unchanged (no vehicle)
- Details on test system:
- The tissues were exposed to the test article neat (undiluted) on April 25, 2018 (Run 1 of 1). EpiDerm™ tissues were purchased from MatTek. Quality control of the tissues was performed by MatTek and the Certificate of Analysis (CoA) for the tissues is provided and is kept in the study binder. Tissues were exposed for approximately 1 hour, with 35 minutes in an approximately 37°C, 5% CO2 humidified incubator and the remaining 25 minutes at room temperature. Following the exposure time, the tissues were rinsed and placed in fresh media for approximately 24 hours. The media was then changed again and the tissues were incubated in fresh media for another ~18 hours for a total of approximately 42 hour post-exposure recovery period. The tissue viability was then assessed by MTT assay. The tissue CoA was used instead of verification of barrier properties of the tissue.MTT and Color Pre-testsPretesting has actually been conducted for all chemicals, although the first intitial 8 test chemicals a pretesting was not conducted (for skin).MTT AssayFollowing the rinsing period, the MTT assay was performed by transferring the tissues to 24-well plates containing 300 µL MTT medium (1.0 mg/mL). After 3 hours MTT incubation at approximately 37°C, approximately 5% CO2 in a humidified incubator, the blue formazan salt was extracted by submerging tissues in 2 mL isopropanol in a 24-well plate. The extraction time was approximately 3 hours with gentle shaking. The optical density of the extracted formazan (200 µL/well of a 96-well plate) was determined using a Thermo Scientific Multiskan FC Microplate Photometer at 570 nm. Relative cell viability is calculated for each tissue as % of the mean negative control tissues.Evaluation of Test Article in the Cell Models:1. Cell system: Upon receipt, the MatTek EpiDerm™ tissue cultures were placed in 0.9 mL of fresh Maintenance medium (in a 6-well plate). The culture inserts are incubated for ~one hour. The tissues were then transferred to 6-well plates containing 0.9 mL fresh Maintenance medium and they were incubated overnight (18 ± 3 hrs) at ~37°C, 5% CO2 in a humidified incubator.2. Control and Test Article Exposures: On the day of dosing, the tissues are then removed from the incubator and the controls and the test article are applied topically to tissues by pipette(liquid) Tissues were exposed to controls and the test article for one hour, with ~35 minutes in a 37°C, 5% CO2 humidified incubator and the remaining 25 minutes at room temperature.a) Controls30 µL of negative control DPBS and 30 μL of the positive control 5% SDS was applied topically to the tissue and gently spread by placing a nylon mesh on the apical surface of each tissue, if necessary.b) Test Articles 25 mg of the test article was applied topically to the tissue 3. Post-exposure treatmentAfter the 1 hour exposure, the tissues were rinsed 15 times with sterile DPBS. After the 15th rinse from washing bottle, each insert wasw completely submerge 3 times in 150 ml DPBS. The apical surface was gently blotted with a cotton swab. The tissues were placed in 0.9 mL of fresh Maintenance medium (6-well plate) for 24 ± 2 hours. After this initial ~24 hour incubation, the tissues were placed in 6-well plates containing 0.9 mL fresh Maintenance medium and incubated for another 18 ± 3 hours, for a total of an approximately 42 hour post-exposure incubation.
RECONSTRUCTED HUMAN EPIDERMIS (RHE) TISSUE
- Model used: The EpiDerm™ 3 dimensional human tissue model
- Tissue Lot number(s): 26459
- Date of initiation of testing: 6/08/2017
TEMPERATURE USED FOR TEST SYSTEM
- Temperature used during treatment / exposure: 37°C
- Temperature of post-treatment incubation (if applicable): 37°C
REMOVAL OF TEST MATERIAL AND CONTROLS-Volume and number of washing steps: The test substance was rinsed from the tissues with sterile DPBS by filling and emptying the tissue insert 15 times to remove any residual test material. This was followed by completely submerge the insert 3 times in 150 ml DPBS
.MTT DYE USED TO MEASURE TISSUE VIABILITY AFTER TREATMENT / EXPOSURE
- MTT concentration: 300 µL MTT medium (1.0 mg/mL).- Incubation time: After 3 hours
- Spectrophotometer: Synergy H4 spectrophotometer
- Wavelength: 570 nm
- Filter: No data-
Filter bandwidth: No data-
Linear OD range of spectrophotometer: No data
NUMBER OF REPLICATE TISSUES: 3
CALCULATIONS and STATISTICAL METHODS
All data were background subtracted before analysis. MTT data are presented as % viable compared to negative control. Data were generated as follows: MTT Assay
Blanks:· The optical density (OD) mean from all replicates for each plate (ODblank).
Negative Controls (NC):· The blank corrected value was calculated: ODNC= ODNCraw– ODblank. · The OD mean per NC tissue was calculated. · The mean OD for all tissues corresponds to 100% viability. · The mean, standard deviation (SD), standard error of the mean (SEM) and the percent coefficient of variation (% CV) was calculated. Positive Control (PC):· Calculate the blank corrected value: ODPC= ODPCraw– ODblank. · The OD mean per PC tissue was calculated. · The viability per tissue was calculated: %PC = [ODPC/ mean ODNC] x 100. · The mean viability for all tissues was calculated: Mean PC = Σ %PC / number of tissues. · The standard deviation (SD), standard error of the mean (SEM) and the percent coefficient of variation (% CV) was calculated. Tested compound :· Calculate the blank corrected value ODTT= ODTTraw– ODblank. · The OD mean per tissue was calculated. · The viability per tissue was calculated: %TT = [ODTT/ mean ODNC] x 100. · The mean viability for all tissues was calculated: Mean TT = Σ %TT / number of tissues. · The standard deviation (SD), standard error of the mean (SEM) and the percent coefficient of variation (% CV) was calculated. Data Correction Procedure for MTT Interfering Compounds (if applicable)True viability = Viability of treated tissue – Interference from test article = ODtvt– ODktwhere ODkt= (mean ODtkt– mean ODukt).ODtvt= optical density of treated viable tissueODkt= optical density of killed tissuesODtkt= optical density of treated killed tissueODukt= optical density of untreated killed tissue (NC treated tissue) Data Correction Procedure for Colored Compounds (if applicable)True viability = Viability of treated tissue incubated in MTT media – Viability of treated tissue incubated in media without MTT = ODtvt– ODvt.ODtvt= optical density of treated viable tissue incubated in MTT mediaODvt= optical density of viable tissues incubated in media alone - Evaluation of data
The results of the assay was evaluated and compared to negative control. Table: Criteria for in vitro Interpretation:
In VitroResults In VivoPredictionMean tissue viability ≤50% Irritant (I), R38Mean tissue viability >50% Non-irritant (NI)- Assay quality controls- Negative Controls (NC)The Dulbecco’s phosphate buffered saline (DPBS) was used as a NC. The assay passed all acceptance criteria if the ODs of the negative control exposed tissues were between ≥0.8 and ≤2.8. - Positive Controls (PC)5% solution of sodium dodecyl sulfate was used as a PC. The assay is meeting the acceptance criteria if the viability of the PC is ≤20% of the negative control. - Standard Deviation (SD)The standard deviation (SD) calculated from individual percent tissue viabilities of the test article exposed replicates was ≤18. - Control samples:
- yes, concurrent negative control
- yes, concurrent positive control
- Amount/concentration applied:
- TEST MATERIAL
- Amount(s) applied (volume or weight with unit):25 mg
- Concentration (if solution): neat
VEHICLE (Not used)
- Amount(s) applied (volume or weight with unit): none
- Concentration (if solution): none-
Lot/batch no. (if required): none
- Purity: none
NEGATIVE CONTROL
- Amount(s) applied (volume or weight): 30 µL sterile DPBS
- Concentration (if solution): neat
POSITIVE CONTROL- Amount(s) applied (volume or weight): 30 µL
- Concentration (if solution): 5% solution of sodium dodecyl sulfate - Duration of treatment / exposure:
- The exposure times were approximately 1 hour, with ~35 minutes exposure in the incubator and ~25 minutes at room temperature.
- Duration of post-treatment incubation (if applicable):
- For a total of an approximately 42 hour post-exposure incubation.
- Number of replicates:
- 3 tissues were used for test compound and control.
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- Run 1
- Value:
- 97.3
- Vehicle controls validity:
- not specified
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- no indication of irritation
- Remarks:
- Mean O.D. : 1.981 ; Non-irritant
- Other effects / acceptance of results:
- The MTT data show the assay quality controls were met.
- Interpretation of results:
- other: not irritating
- Conclusions:
- The dermal irritation potential of test article was determined according to the OECD 439 test guideline followed for this study. The Mean % tissue viability compared to negative control (n=3) of the test substance.was determined to be 97.3 %. Thus, substance was considered to be not irritating to the human skin.
- Executive summary:
The dermal irritation potential of test article was determined according to the OECD 439 test guideline for this study. The MatTek EpiDerm™ model was used to assess the potential dermal irritation of the test article by determining the viability of the tissues following exposure to the test article via MTT. Tissues were exposed to the test article and controls for ~one hour, followed by a 42 hour post-exposure recovery period. The viability of each tissue was determined by MTT assay.
The MTT data show the assay quality controls were met and passed the acceptance of criteria.
The Mean % tissue viability compared to negative control (n=3) of the test substance was determined to be 97.3%.
Hence, under the current experimental test conditions it was concluded that test substance was considered to be not irritating to human skin.
Reference
Endpoint conclusion
- Endpoint conclusion:
- no adverse effect observed (not irritating)
Eye irritation
Link to relevant study records
- Endpoint:
- eye irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Justification for type of information:
- Data is from experimental study report.
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 492 (Reconstructed Human Cornea-like Epithelium (RhCE) Test Method for Identifying Chemicals Not Requiring Classification and Labelling for Eye Irritation or Serious Eye Damage)
- Principles of method if other than guideline:
- The purpose of this study was to assess potential for the test article to be ocular irritants. The ocular irritation potential of a test article may be predicted by measurement of its cytotoxic effect, as reflected in the (MTT) assay, in the MatTek EpiOcular™ model
- GLP compliance:
- no
- Species:
- human
- Strain:
- other: Not applicable
- Details on test animals or tissues and environmental conditions:
- - Description of the cell system used:
The normal human-derived keratinocytes were cultured at the air-liquid interface in a chemically defined medium on a permeable polycarbonate insert (surface 0.5 cm2). They were cultured in chemically defined serum free medium to form a multi-layered epithelium similar to that found in native corneal mucosa. Each lot of tissues was Quality Assured by MatTek according to specific QC standards including: histology, tissue viability (MTT mean optical density), reproducibility (SD) and tissue thickness.
- Test System Identification
All of the EpiOcular™ 3-dimensional human tissues used in this study were identified by the date of arrival and the lot number. Certificate of Analysis for the tissues is included in this report. Tissue plates were appropriately labeled with study information. Bias was not a factor in this test system.
- Justification of the test method and considerations regarding applicability
EpiOcularTM Eye Irritation (OCL) by MatTek In Vitro Life Science Laboratories, Bratislava, Slovakien
The test articles and controls were evaluated for potential ocular irritancy using the EpiOcular™ 3 dimensional human tissue model purchased from MatTek,In Vitro Life Science Lab. (Bratislava, Slovakia).The EpiOcular tissue construct is a nonkeratinized epithelium prepared from normal human keratinocytes (MatTek). It models the cornea epithelium with progressively stratified, but not cornified cells. These cells are not transformed or transfected with genes to induce an extended life span in culture. The “tissue” is prepared in inserts with a porous membrane through which the nutrients pass to the cells. A cell suspension is seeded into the insert in specialized medium. After an initial period of submerged culture, the medium is removed from the top of the tissue so that the epithelial surface is in direct contact with the air. This allows the test material to be directly applied to the epithelial surface in a fashion similar to how the corneal epithelium would be exposed in vivo. Each lot of tissues was Quality Assured by MatTek, Inc. according to specific QC standards including: histology (cell layers), tissue viability (MTT mean optical density) and reproducibility (SD). - Vehicle:
- unchanged (no vehicle)
- Controls:
- yes, concurrent positive control
- yes, concurrent negative control
- Amount / concentration applied:
- TEST MATERIAL
- Amount(s) applied (volume or weight with unit): 50 mg of solid test chemical
- Concentration (if solution): neat (undiluted)
VEHICLE (no vehicle)
- Amount(s) applied (volume or weight with unit): none
- Concentration (if solution): none
- Lot/batch no. (if required): none
- Purity: none
NEGATIVE CONTROL
- Amount(s) applied (volume or weight): 50 μL
- Concentration (if solution): neat
POSITIVE CONTROL
- Amount(s) applied (volume or weight): 50 μL
- Concentration (if solution): neat - Duration of treatment / exposure:
- Tissues were exposed for approximately 6 hrs ± 15 min for solid test articles, and controls, at approximately 37°C, 5% CO2 in a humidified incubator.
- Observation period (in vivo):
- Not applicable
- Duration of post- treatment incubation (in vitro):
- Following the washing and post soak, the tissues were rinsed and incubated at approximately 37°C, 5% CO2 in a humidified incubator for a post-exposure recovery time of 18 hours for solid test chemicals and controls
- Number of animals or in vitro replicates:
- 2 tissues were used for test compound and control.
- Details on study design:
- - Details of the test procedure used
The tissues were exposed to the test article neat (undiluted). EpiOcular™ tissues were purchased from MatTek. Quality control of the tissues was performed by MatTek and the Certificate of Analysis (CoA)
for the tissues is provided and is kept in the study binder. Tissues were exposed for approximately 6 hrs ± 15 min for solid test articles and controls at approximately 37°C, 5% CO2 in a humidified incubator.
After the exposure, the test article was rinsed off the tissues and the tissues were soaked in media for ~25 minutes for solid test articles and controls.Following the washing and post soak, the tissues were rinsed and incubated at approximately 37°C, 5% CO2 in a humidified incubator for a post-exposure recovery time of 18 hours for solid test chemicals and controls.Tissue viability was assessed by 3-(4,5-dimethylthiazol- 2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay.
- MTT Auto reduction and colouring assessment
MTT Pre-test
The test article was assessed for the potential to interfere with the assay. Approximately 50 µL of liquid test article was added to 1 mL of MTT media (~1 mg/mL) and incubated in a humidified incubator at approximately 37°C and approximately 5% CO2 for 3 hours. 50 µL of ultrapure water was used as a negative control.
- Test Article Color Test
Approximately 50 µL of liquid test article was added to 1.0 mL of ultrapure water and 2.0 mL isopropanol and incubated in a humidified incubator at approximately 37°C and approximately 5% CO2 for 2 hours, 04 minutes and 35 seconds. Samples were then added to the wells of a clear 96-well plate and the plate was read on a Thermo Scientific Multiskan FC Microplate Photometer to 570 nm. Test articles that tested positive for excessive coloration (OD >0.08) were assessed on living-tissue controls that were incubated in both culture media and MTT media as well (n=3 for both conditions).
- MTT Assay:
Inserts are removed from the 24-well plate after 3 hrs of incubation and the bottom of the insert is blotted on absorbent material, and then transferred to a pre-labeled 6-well plate containing 1 ml isopropanol in each well so that no isopropanol is flowing into the insert. At the end of the non-submerged extraction inserts and tissues are discarded without piercing and 1 ml of isopropanol is added into each well. The extract solution is mixed and the optical density of the extracted formazan (200 μL/well of a 96-well plate) was determined using Thermo Scientific Multiskan FC Microplate Photometer at 570 nm. Relative cell viability was calculated for each tissue as % of the mean negative control tissues.
- Evaluation of Test Article in the cell Models
1. Cell System:
Upon receipt, the MatTek EpiOcular™ tissue cultures were placed in 1.0 mL of fresh Maintenance medium (in a 6-well plate) for 60 minutes. After the 60 minutes incubation, the Maintenance medium was exchanged with fresh medium and the tissues were incubated overnight (16-24 hrs) at approximately 37°C, approximately 5% CO2 in a humidified incubator.
2. Control and Test Article Exposures:
20 µL of calcium and magnesium free DPBS was added to each tissue and the tissues placed back into the incubator for 30 minutes. The controls and the test article will be applied topically to tissues by pipette.2 tissues will be used per test compound and control.
a)Controls: 50 µL of negative control sterile ultrapure water and positive control methyl acetate were added to the tissues. The tissues were placed into the ~37°C humidified incubator with 5% CO2 for the approximately 30 minute exposure time.
b)Test Article: When a solid was tested, 50 mg of the solid were added to the tissues. The tissues were placed into the ~37°C humidified incubator with 5% CO2 for the approximately 6 hrs ± 15 min.
3. Post exposure treatment:
After the exposure, the tissues were rinsed 20 times with sterile of DPBS to remove test material. The apical surface was gently blotted with a cotton swab and cultures were immediately transferred to a 12-well plate containing 5 mL of media per well. Tissues exposed to liquid test articles (and the respective control) were incubated, submerged in the media for ~12 minutes at room temperature.For liquid test articles, tissues, Tissuses were then transferred to 6-well plates containing 1.0 mL fresh Maintenance medium per well and incubated for a post-exposure recovery period for 2 hours at approximately 37 degC, 5% CO2 in a humidified incubator.
- Doses of test chemical and control substances used
Test Article:
When a solid was tested, 6 hours of the solid were added to the tissues. The tissues were placed into the ~37°C humidified incubator with 5% CO2 for the approximately 6 hrs ± 15 min.
Controls: 50 µL of negative control sterile ultrapure water, positive control methyl acetate were added to the tissues. The tissues were placed into the ~37°C humidified incubator with 5% CO2 for the approximately 30 minute exposure time.
- Duration and temperature of exposure, post-exposure immersion and post-exposure incubation periods:
Tissues were exposed for approximately 6 hours for solid test articles and controls, at approximately37°C, 5% CO2 in a humidified incubator.
Following the post soak, the tissues were rinsed and incubated at approximately 37°C, 5% CO2 in a humidified incubator for a post-exposure recovery time totaling 18 hours for solid test articles and controls.
- Justification for the use of a different negative control than ultrapure H2O (Not applicable)
- Justification for the use of a different positive control than neat methyl acetate (Not applicable)
- Number of tissue replicates used per test chemical and controls: 2 tissues were used for test compound and control.
- Description of the method used to quantify MTT formazan
The blue formazan salt was extracted by placing the tissue insterts in 1 mL isopropanol in a 6-well plate. The extraction for solid exposed tissues was 3 hrs incubation. After an addition of 1 ml isopropanol and mixing, the optical density of the extracted formazan (200μL/well of a 96-well plate) was determined using a Thermo Scientific Multiskan FC Microplate Photometer at 570 nm.
- Description of evaluation criteria used including the justification for the selection of the cut-off point for
the prediction model
Calculations and Statistical Methods
MTT Assay
Blanks:
· The OD mean from all replicates for each plate (ODblank).
Negative Controls (NC):
· The blank corrected value was calculated: ODNC= ODNCraw– ODblank.
· The OD mean per NC tissue was calculated.
· The mean OD for all tissues corresponds to 100% viability.
· The mean, standard deviation (SD), standard error of the mean (SEM) and the percent coefficient of variation (% CV) was calculated.
ODblank= optical density of blank samples (isopropanol alone).
ODNCraw= optical density negative control samples.
ODNC= optical density of negative control samples after background subtraction.
Positive Control (PC):
· Calculate the blank corrected value: ODPC= ODPCraw– ODblank.
· The OD mean per PC tissue was calculated.
· The viability per tissue was calculated: %PC = [ODPC/ mean ODNC] x 100.
· The mean viability for all tissues was calculated: Mean PC = Σ %PC / number of tissues.
· The standard deviation (SD), standard error of the meanthe mean (SEM) and the percent coefficient of variation (% CV) was calculated.
ODPCraw= optical density positive control samples.
ODPC= optical density of positive control samples after background subtraction.
Tested Articles:
· Calculate the blank corrected value ODTT= ODTTraw– ODblank.
· The OD mean per tissue is calculated.
· The viability per tissue is calculated: %TT = [ODTT/ mean ODNC] x 100.
· The mean viability for all tissues is calculated: Mean TT = Σ %TT / number of tissues.
· The standard deviation (SD) and the percent coefficient of variation (% CV)for the controls and the test articles will be calculated.
ODTTraw= optical density test article samples.
ODPC= optical density of test article samples after background subtraction.
Data Correction Procedure for MTT Interfering Compounds
True viability = Viability of treated tissue – Interference from test article = ODtvt – ODkt where ODkt =
(mean ODtkt – mean ODukt).
ODtvt = optical density of treated viable tissue
ODkt = optical density of killed tissues
ODtkt = optical density of treated killed tissue
ODukt = optical density of untreated killed tissue (NC treated tissue)
Data Correction Procedure for Colored Compounds
True viability = Viability of treated tissue incubated in MTT media – Viability of treated tissue incubated in
media without MTT = ODtvt – ODvt.
ODtvt = optical density of treated viable tissue incubated in MTT media
ODvt = optical density of viable tissues incubated in media alone.
Proposed Statistical methods
The mean, standard deviation (SD) and the percent coefficient of variation (% CV) for the controls and the test article will be calculated.
- Evaluation of data
The results of the assay was evaluated and compared to negative control.
Table: Irritancy Prediction
In VitroResults In VivoPrediction
Mean tissue viability ≤60% Irritant (I) – Category 1 or 2
Mean tissue viability >60% Non-irritant (NI) – No Category
- Assay quality controls
- Negative Controls (NC)
The assay is meeting the acceptance criterion if the mean viability of the NC in terms of Optical Density(OD570) of the NC tissues (treated with sterile ultrapure water) in the MTT assay are >0.8 to <2.5. This is an indicator of tissue viability following shipping and conditions under use.
- Positive Controls (PC)
Methyl acetate was used as a PC and tested concurrently with the test article. The assay is meeting the acceptance criteria if the viability of the PC is <50% of the negative control.
- Standard Deviation (SD)
Each test of ocular irritancy potential is predicted from the mean viability determined on 2 single tissues. The assay meets the acceptance criteria if SD calculated from individual percent tissue viabilities of the
replicates is <18% for three replicate tissues. - Irritation parameter:
- other: mean % tissue viability
- Run / experiment:
- Run 1
- Value:
- 101.2
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- no indication of irritation
- Remarks:
- Mean OD:1.793; SD: 5.48; %CV :2.74; Non-Irritant
- Other effects / acceptance of results:
- The MTT data show the assay quality controls were met.
- Interpretation of results:
- other: not irritating
- Conclusions:
- The ocular irritation potential of test article was determined according to the OECD 492 test guideline followed for this study. The mean % tissue viability of test substance was determined to be 101.2%. Thus, the test chemical was considered to be not irritating to the human eyes.
- Executive summary:
The ocular irritation potential of test article was determined according to the OECD 492 test guideline for this study. The MatTek EpiOcular™ model was used to assess the potential ocular irritation of the test articles by determining the viability of the tissues following exposure to the test article via MTT. Tissues were exposed to solid test articles and control for approx.6 hours, followed by a 25 minute post-soak and approximately 18 hours recovery after the post-soak. The viability of each tissue was determined by MTT assay.
The MTT data show the assay quality controls were met, passing the acceptance criteria.
The mean % tissue viability of test chemical was determined to be 101.2%. Hence, under the experimental test conditions it was concluded that test chemical was considered to be not irritating to the human eyes and can thus be classified as "Not Classified" as per CLP Regulation
Reference
Observation Table:
Code N° |
Tissue No. |
Raw data |
Blank corrected data |
mean of OD |
% of viability |
||
Aliq. 1 |
Aliq. 2 |
Aliq. 1 |
Aliq. 2 |
||||
NC
|
1 |
1.8535 |
1.8689 |
1.818 |
1.834 |
1.826 |
103.1 |
2 |
1.7289 |
1.7765 |
1.694 |
1.741 |
1.718 |
96.9 |
|
PC |
1 |
0.5958 |
0.5392 |
0.561 |
0.504 |
0.532 |
30.0 |
2 |
0.5759 |
0.5785 |
0.541 |
0.543 |
0.542 |
30.6 |
|
Test chemical |
1 |
1.768 |
1.7905 |
1.733 |
1.755 |
1.744 |
98.4 |
2 |
1.8673 |
1.8854 |
1.832 |
1.850 |
1.841 |
103.9 |
Endpoint conclusion
- Endpoint conclusion:
- no adverse effect observed (not irritating)
Respiratory irritation
Endpoint conclusion
- Endpoint conclusion:
- no study available
Additional information
Skin Irritation
Various studies have been performed to determine the dermal irritation potential of the test chemical. The data includes experimental in vitro as well as in vivo studies for the various test chemicals. The results are summarized as follows:
An in-vitro dermal irritation study was conducted to assess the dermal irritation potential of test article according to the OECD 439 test guideline. The MatTek EpiDerm™ model was used to assess the potential dermal irritation of the test article by determining the viability of the tissues following exposure to the test article via MTT. Tissues were exposed to the test article and controls for ~one hour, followed by a 42 hour post-exposure recovery period. The viability of each tissue was determined by MTT assay. The MTT data show the assay quality controls were met and passed the acceptance of criteria. The Mean % tissue viability compared to negative control (n=3) of the test substance was determined to be 97.3%. Hence, under the current experimental test conditions it was concluded that test substance was considered to be not irritating to human skin.
Another, in-vitro study was performed in which dermal irritation potential of test article was determined according to the OECD 439 In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method”. The MatTek EpiDerm™ model was used to assess the potential dermal irritation of the test article by determining the viability of the tissues following exposure to the test article via MTT. The objective of this study was to assess the dermal irritation potential of test article Tissues were exposed to test article and controls for ~one hour, followed by a 42 hour post-exposure recovery period. The viability of each tissue was determined by MTT assay. The MTT data shows that the assay quality controls were met, as the OD of the negative control tissues was between 1.195 and 1.430. Also, the positive control, 5% sodium dodecyl sulfate (SDS), reduced tissue viability to 4.5% of negative control. The Mean % tissue viability compared to negative control (n=3) of the test chemical was determined to be 113.0 %. Hence, under the experimental test conditions it was concluded that the test chemical was considered to be not irritating to the human skin and being classified as “Not Classified'' as per CLP Regulation.
This is supported by the results of patch test was conducted on rabbits to determine the degree of skin irritation caused by the test chemical.
When the test chemical was applied on each rabbit for 24 hours under occlusive condition, no skin reactions were observed. Hence the test chemical was considered as not irritating to the skin of rabbits.
These are further supported by the results of another Skin irritation study was conducted in three male New Zealand White Rabbits in order to assess the irritation potential caused by the test chemical.
Approximately, 500mg (0.5g) of the test chemical moistened with water was applied to an intact area skin under semi-occlusive condition. After 4 hours patches were removed and the remaining test substance was rinsed off and skin reactions were scored.
A slight yellow staining was observed in 2 out of 3 rabbits with primary irritation score of 0.0 at all observation periods. Hence the test chemical was considered to be not irritating to the skin of three male New Zealand White Rabbits.
The in vitro and in vivo data are in agreement with each other, indicating a very strong possibility that the test chemical can be indeed not irritating to skin. Comparing the above annotations with the criteria of the CLP Regulation, the test chemical can be classified under the category “Not Irritating”.
Eye Irritation
Various studies have been performed to determine the ocular irritation potential of the test chemical. The data includes experimental in vitro as well as in vivo studies for the various test chemicals. The results are summarized as follows:
The ocular irritation potential of test article was determined according to the OECD 492 test guideline for this study. The MatTek EpiOcular™ model was used to assess the potential ocular irritation of the test articles by determining the viability of the tissues following exposure to the test article via MTT. Tissues were exposed to solid test articles and control for approx.6 hours, followed by a 25 minute post-soak and approximately 18 hours recovery after the post-soak. The viability of each tissue was determined by MTT assay.
The MTT data show the assay quality controls were met, passing the acceptance criteria.
The mean % tissue viability of test chemical was determined to be 101.2%. Hence, under the experimental test conditions it was concluded that test chemical was considered to be not irritating to the human eyes and can thus be classified as "Not Classified" as per CLP Regulation
This is supported by the results of another in vitro study performed according to the OECD 492 test guideline. The MatTek EpiOcular™ model was used to assess the potential ocular irritation of the test article by determining the viability of the tissues following exposure to the test article via MTT. The objective of this study was to assess the ocular irritation potential of test article. Tissues were exposed to test article and controls for ~6 hours, followed by a ~25 minute post-soak and approximately 18 hour recovery after the post-soak. The viability of each tissue was determined by MTT assay.
The MTT data show the assay quality controls were met, as the OD of the negative control tissues was 0.8 to 2.5 in run 1. Also, the positive control, methyl acetate, reduced tissue viability to be below 50% of negative control (for 6 hour exposures with solids) in run one and the standard deviation (SD) calculated from individual percent tissue viabilities of the test article exposed replicates was passing the acceptance criteria.
The mean % tissue viability of test chemical was determined to be 93.2%.
Hence, under the experimental test conditions it was concluded that test chemical was considered to be not irritating/irritating to the MatTek EpiOcular Tissue Model OCL-200 and being classified as “Not classified’’.
The above in vitro studies are supported by an in vivo study performed according to OECD Guide-line 405 “Acute Eye Irritation/Corrosion”.
When the test chemical was instilled into the eyes of each rabbit, no ocular lesions were observed. Hence the test chemical was considered as not irritating to the eye of rabbits.
These studies are further supported by another ocular irritation study was conducted on three female New Zealand White Rabbits to assess the ocular irritation potential of the test chemical.
0.1ml of test chemical in 30% PEG-6 solution was instilled into the right eye of each rabbit whereas the other untreated eye served as control.
Both the eyes were observed for ocular lesions at 1, 24, 48 and 72 hours post-treatment. Since none of the rabbits developed any ocular lesion, the test chemical was considered to be not irritating to the eyes of three female New Zealand White Rabbits.
The in vitro and in vivo data are in agreement with each other, indicating a very strong possibility that the test chemical can be indeed not irritating to eyes. Comparing the above annotations with the criteria of the CLP Regulation, the test chemical can be classified under the category “Not Irritating”.
Justification for classification or non-classification
Available studies for the test chemical indicate a possibility that the test chemical lacks the potential to cause irritation to eyes and skin.
Hence, the test chemical can be considered to be not irritating to eyes and skin. It can be further classified under the category "Not Classified" as per CLP Regulation.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.