Registration Dossier

Administrative data

First-aid measures

First-aid measures
First-aid measures general : Take off immediately all contaminated clothing. Remove person to uncontaminated area.
First-aid measures after inhalation : Assure fresh air breathing. Obtain medical attention if breathing difficulty persists.
First-aid measures after skin contact : Rinse immediately with plenty of water. Get medical advice/attention if you feel unwell.
First-aid measures after eye contact : In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
First-aid measures after ingestion : Never give anything by mouth to an unconscious person. Rinse mouth. Get medical advice/attention.
Indication of any immediate medical attention and special treatment needed : Get medical advice and attention if you feel unwell.

Fire-fighting measures

Suitable extinguishing media : Bank fires with firefighting foam. Carbon dioxide (CO2). Powder.
Fire hazard : Under fire conditions, hazardous fumes will be present. carbon oxides (CO and CO2), nitrogen oxides, chlorine.
Precautionary measures fire : Exercise caution when fighting any chemical fire.
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection. Do not breathe fumes from fires or vapours from decomposition.

Accidental release measures

General measures : Ventilate area. Avoid creating or spreading dust.
Emergency procedures : Evacuate area.
Protective equipment : Wear suitable protective clothing, gloves and eye or face protection. Where excessive dust may result, wear approved mask.
Environmental precautions : Prevent entry to sewers and public waters.
For containment : Collect spills and put it into appropriated container.
Methods for cleaning up : Wash away remainder with plenty of water.
Other information : Dispose of at authorized waste collection point.

Handling and storage

Handling and storage
This substance is handled under Strictly Controlled Conditions in accordance with the REACH regulation Article 17(3) for on-site isolated intermediate and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each Manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Processor/User of the Registrant’s intermediate.
Additional hazards when processed : Local exhaust is needed at source of dust.
Precautions for safe handling : Do not get in eyes, on skin, or on clothing. Handle carefully. Avoid all unnecessary exposure. Do not breathe dust.
Hygiene measures : Do no eat, drink or smoke when using this product. Wash hands and other exposed areas with soap and water before leaving work. Take off immediately all contaminated clothing.
Technical measures : Provide adequate ventilation to minimize dust concentrations.
Storage conditions : Keep in a cool, well-ventilated place away from moisture. Store in tightly closed containers.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

This substance is handled under Strictly Controlled Conditions in accordance with the REACH regulation Article 17(3) for on-site isolated intermediate and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each Manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Processor/User of the Registrant’s intermediate.
Hand protection : Wear suitable gloves resistant to chemical penetration. nitrile rubber gloves.
Eye protection : Wear tight fitting safety glasses or facial screen. Emergency eye wash fountains should be available in the immediate vicinity of any potential exposure.
Skin and body protection : Wear suitable protective clothing. In case of repeated or prolonged exposure : Fully enclosed impervious protective suit with integral or tight-fitting gloves, boots, self-contained or supplied air respirator must be worn. Emergency safety showers should be available in the immediate vicinity of any potential exposure.
Respiratory protection : Provide adequate ventilation to minimize dust concentrations. Where excessive dust may result, use approved respiratory protection equipment.

Stability and reactivity

Stability and reactivity : Stable under normal conditions of use.
Hazardous decomposition products : Carbon oxides, nitrogen oxides, chlorine.
Materials to avoid : Strong oxidizing agents.
Conditions to avoid : Excessive heat.

Disposal considerations

General : Avoid release in the environment. Dispose of this material and its container at hazardous or special waste collection point. Dispose in a safe manner in accordance with local/ national regulations.
Disposal method : Do not empty into drains, dispose of this material and its container at hazardous or special waste collection point.
Special precautions : When not empty dispose of this material and its container at hazardous or special waste collection point.